Premiere Firearms Auction

Manufactured circa 1862-65, the Providence Tool Company was one of the major contractors of muskets for the Civil War. The lock is marked "1865...

Manufactured from 1859 to 1866, this carbine is fitted with a sling bar, ring, Lawrence folding rear sight graduated to 800 yards, a Lawrence pellet p

Sharps & Hankins Navy Model Carbine with distinctive leather covered barrel and firing pin mounted on the recoil shield, one of 6686 produced fo...

Early production Sharps Model 1859 Rifle with barrel lug for saber bayonet manufactured in 1862. The U.S. Army contracted for 3600 Model 1859 Rifles w

This is an example of a New Model 1859 carbine that was converted to a metallic cartridge breech loader following the Civil War. The carbine has the r

The carbine has the R.S. Lawrence patent rear sight and pellet primer and a sling bar with ring is fitted to the left side of the stock and receiver.

Rare Miller & Co., presentation cavalry officer's saber with Collins & Co., blade. The upper scabbard mount has an integral, oval, plate...

U.S. 1860 Pattern Staff & Field Officer's Sword, 29 3/4" double edged blade with acid etched engraving and a "RIDABOCK & Co/ ...

Horstmann Cavalry Officer's saber with Solingen blade. The oval, silver, presentation plate on the obverse of the scabbard is inscribed: "...

Civil War Cavalry Officer's saber with 1840-1860 style transition blade. The reverse ricasso is stamped with the Solingen Weyersberg "king...

29 inch double edged spear-point blade, with no visible markings. Gilt finished brass hilt, with eagle and globe designs on the languets, leaf decorat

Fancy, Presentation, non-regulation, U.S. 1860 Staff & Field Officer's Sword, with Soligen 30 inch double edged diamond profile blade. The b...

U.S. Liberty-Pommel Officer's Sword (c.1820-1840). The sword has a cast, silver-plated brass, liberty head pommel, mother-of-pearl grips, eagle ...

High quality, presentation 1902 Army Officer's Saber with etched inscription. The 32" single fuller blade is etched with the inscription &q...

Civil War Ames Model 1840 Light Artillery Saber manufactured in 1863. The obverse ricasso is marked: "U.S./ADK/1863" and the reverse has t...

The saber has a 32" curved single fuller blade, with makers and "D.R." inspector's marks and 1863 date on the ricassos. A "D...

Colt factory engraved and cased, Model 1851 Navy Revolver that was manufactured at the beginning of the Civil War in 1861. This early, Fourth Model, N

This is a fine original example of a Colt Model 1871-72 Open Top Revolver; this limited production revolver was the direct predecessor to the Colt Sin

Colt Richards-Mason Model 1860 Army Revolver with nickel plated finish and varnished, one-piece walnut grip. The hammer is casehardened and the trigge

Colt Model 1860 Army revolver with four-screw frame manufactured in 1862. The revolver has a military blue finish on the barrel, cylinder, trigger gua

This U.S. Colt Third Model Dragoon was manufactured in 1853. The revolver has the round brass trigger guard and rectangular cylinder stops found on Th

Roughly 12 3/4" in length, with six conical cavities, a combination funnel and sprue cutter, steel arms stamped "D" and wood handles ...

Produced in 1861. Cone front and groove rear sights, with the two line, two block barrel markings with Maltese crosses and pointing hand. Engraving is

Manufactured in 1863. The revolver has a three-screw frame cut for a shoulder stock. The rebated cylinder is roll-engraved with the Texas Navy battle

A) This pair of revolvers was manufactured in 1861. The Fourth Model Navy revolvers have commercial blue barrels and cylinders, case-hardened loading

Manufactured in 1849, this revolver was manufactured with the 6 inch barrel without the loading lever, has a square back trigger guard and round cylin

Manufactured in 1863, this revolver is inscribed on the back strap "Lt. Col John Clark / 3rd Regt. P.R.V.C.". Lt. Colonel John Clark was ...

This is a fine example of a Colt Model 1860 Army Richards Conversion revolver with scarce 12-slot cylinder. The revolver has a retailer applied nickel

This is a fine example of a factory engraved Colt Model 1851 Navy revolver. The engraving was done by the Gustave Young shop and was manufactured in 1

This is an example of a factory cased Colt Model 1849 percussion revolver manufactured in 1862. The revolver has a four-inch octagon barrel with caseh

Late production U.S. contract Colt 1st Model Dragoon Revolver. The cylinder has the distinctive oval cylinder stops that distinguish the 1st Model Dra

This a very rare Colt bullet mold for the Colt Second Model Dragoon revolver. Constructed out of brass, the mold has two cavities (round and conical).

These revolvers were manufactured from 1853 to 1857 and serial numbered in their own range, 1-11000. This is an example of a cased, factory engraved 1

Two leather bound histories, "THE GREAT REBELLION VOL. I" and "THE GREAT REBELLION VOL. II" by J.T Headley, from the personal li...

1) Proceedings at The Dedication of Charter Oak Hall, purple bound book, approximately 45 pages, rebound in purple with gold lettering. Book contains

All bullet molds have two cavities (round and conical). 1-2) Iron .31 caliber bullet mold for Model 1849 revolver, "COLTS / PATENT" marked...

1) Colt Model 1860 Army revolver two cavity (round, conical) iron bullet mold, marked "44" on the outside of left leg, "CHS" mon...

Three Colt brass two cavity bullet molds (round and conical) with the following differences: 1) .28 caliber, "COLT / PATENT" marked iron s...

1) Gilt finished pistol capper, marked "2" and "FOX" on the lid. 2) Brass pistol capper, marked "A PARIS" over a gothi...

This fine example of a Colt Model 1861 Richards-Mason Conversion revolver was chambered for the .38 Center-Fire cartridge. This revolver was one of an

Colt Model 1860 Army revolver manufactured in 1862. The revolver has a three-screw frame. The barrel, cylinder and backstrap have the Colt military bl

This very fine example of a Colt Model 1862 Police revolver was manufactured in 1861. The pistol has a high-polish, commercial blue barrel and five-sh

This is an almost identical copy of the Colt Model 1851 Navy and features a deep chiseled floral vine engraving on the barrel, frame, cylinder, trigge

This is a very good example of a high quality period copy of a Colt First Model Dragoon revolver. The revolver is hand engraved "COLTS / PATENT...

Two reproduction Colt Dragoon revolver walnut cases with both measuring approximately 15 3/4" x 7 1/4" x 2 3/4". Both cases are parti...

Fixed sights, with the top strap marked "MANUFACTURED BY/ MASS. ARMS CO./ CHICOPEE FALLS.", "KERR'S PATENT/ APRIL 14. 1857" ...

The top barrel flat is stamped "COLT / PATENT" and the Liege ELG proof with a crown/Y proof on the cylinder. An additional crown/Y proof i...

1) Colt Dragoon mold, 2-chamber, brass with iron cutter, "C.W.H." on left side. 2) As 1, no inspector mark. 3) Colt Navy mold, full silver...

Made in 1852. The top of the barrel flat has the bracketed two line "ADDRESS SAML COLT / NEW-YORK CITY" marking, the cylinder is roll-eng...

Manufactured in 1863, with a 3 screw frame cut for a shoulder stock. The top of the barrel has the one line New York U. S. America address flanked by

Manufactured in 1855. Standard two line New York barrel address, "COLTS / PATENT" on the left side of the frame, "5" on the left...

Manufactured in 1863. The top of the barrel has the standard one line New York address, "COLTS / PATENT" on the left side of the frame, an...

This is an example of a desirable Model 1851 Navy-Army contract revolver that was purchased by the U.S. Army prior to the Civil War. These U.S. Model

Manufactured in 1853, this particular Colt Model 1849 revolver has a three-inch octagon barrel with no provision for a loading lever and small round t

Manufactured in 1862, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, "COLTS / PATENT&q...

This restored Colt Model 1860 Army percussion revolver case measures 15" x 6 5/8" x 2 1/8". Key is absent. The inside of the case is ...

Manufactured in 1860. The revolver has the standard two line New York address in brackets on the top barrel flat, "COLTS / PATENT" on the ...

Four powder flasks that feature the same eagle and shield design: two rows of stars, eagle/shield, crossed revolvers and "E Pluribus Unum"...

Manufactured in 1856. Fitted with the scarce German silver blade front dovetailed onto the barrel with the standard hammer notch rear sight. The top b

The revolver has the distinctive breech plate with notch rear sight, a center firing pin and loading gate marked "3698". The blade front s...

Manufactured in 1862 for the U.S. Army, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, &quo...

This is a fine example of a late production Model 1849 revolver manufactured in 1863. The top barrel flat has the late one line New York address marki

Manufactured in 1862, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, "COLTS / PATENT&q...

Manufactured in 1862. The top of the barrel flat is marked with the two line Hartford address. The cylinder is roll-engraved with the Stagecoach holdu

Manufactured in 1862, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, "COLTS / PATENT&q...

Manufactured in 1865. The top of the barrel has the standard one line New York address, "COLTS / PATENT" on the left side of the frame, an...

Manufactured in 1855, the first year of production. The serial number falls into the Model 2 serial number range. Brass post front and frame groove re

1) Sealed pack of six 44-100 inch caliber combustible envelope cartridges. 2) Pack of six 44-100 inch caliber combustible envelope cartridges. 3) Seal

A) Manufactured in 1856. Standard two line New York barrel address, "COLTS / PATENT" on the left side of frame, and stagecoach holdup scen...

This late production Colt Walker flask shows the dTcor of massed flags, mortar, field piece, drum, and crossed arms, with no star between the words Co

This rare flask was used with the Paterson carbine. The dTcor is that of massed flags, mortar, field piece, drum, and crossed arms, with "COLTS

This extraordinary Colt Second Model Derringer pistol was manufactured with a solid sterling silver frame and barrel. The left side of the barrel is s

Colt Open Top Pocket Model Revolver manufactured in 1874. The revolver is factory engraved with Germanic scroll-work on a punch-dot background and ha

Half-moon German silver front sight and hammer notch rear sight. The top of the barrel is marked "+COLT'S PT.F.A. MFG. Co./ HARTFORD. CT. U...

Standard Colt Third Model (Thuer) Deringer with blued barrel, silver-plated frame and mother-of-pearl, birds head grips. The frame is decorated with f

Manufactured in 1885, this was the final revolver in the New Line series. Fixed front sight on a barrel with the two line Hartford address on top and

Very early production Colt Cloverleaf House Model Revolver manufactured in 1871. The revolver has the rarely encountered factory engraved scroll work

A) This exceptional Colt Third Model or No 3 Derringer has an all nickel plated finish (including screws), with varnished walnut grips. The barrel has

Produced between 1875 and 1912, this deringer was embellished by Rudoph Kornbrath, master engraver, in the early 20th century. The frame is done in oa

Manufactured in 1871, the first year of production. Open frame revolver with round blade front and hammer notch rear sights. Two-line Colt Hartford a

Manufactured from 1870 to 1890, this Colt First Model .41 Derringer features German silver half-moon front and hammer notch rear sights. The top of t

Manufactured in 1876, this revolver falls into the serial number range of the Second Model and features the long cylinder flutes and locking slots on

Produced circa 1875-1912. German silver blade front sight on barrel marked "-COLT-", with London "crown/ GP" and "crown/ V&...

This rare short barreled Colt Cloverleaf House Model Revolver manufactured in 1871. The revolver has the scarce 1 and 1 /2 inch round barrel with half

Manufactured from 1870 to 1890. German silver half-moon front and hammer notch rear sights. Standard two line Hartford address and "NO1" m...

Manufactured between 1870 and 1890. German silver half-moon front sight and hammer notch rear sight. Standard two line Hartford barrel address follow

This is an extremely rare English oak London Agency case for a pair of Colt Number 1 Derringers. The lid is constructed with 8 brass screws with brass

Manufactured in 1884, this was the final revolver in the New Line series. Fixed front sight on a barrel with the two line Hartford address on top and

Manufactured between 1870 and 1890. This is a rare variation of the First Model Derringer with the top of the barrel marked with the Second Model stam

Manufactured in 1876, this revolver falls into the serial number range for the Second Model with long cylinder flutes and locking notches on the back

The "C/ Rampant Colt" marking was placed in response to inter-agencey hostility by the Colt London Agency following New York-based agents ...

Colt New Line .32 Caliber Revolver manufactured in 1874. The revolver had a full nickel-plated finish with two-piece mother-of-pearl, bird's hea...

Manufactured in 1876. Blade front sight and hammer notch rear sight, with the barrel having the two line Hartford address on top flanked by Maltese cr

Colt New Line .22 Revolver with nickel-plated finish, factory engraving, and two-piece, mother-of-pearl, bird's head grips. This revolver was ma...

Blade front sight and hammer notch rear sight, with the barrel having the two line Hartford address on top (without Maltese crosses) and the left side

Manufactured from 1871 to 1877, this Colt Open top Pocket revolver is engraved, with a nickel plated finish and "Tiffany" style silver pla...

The top of the blued barrel is marked "-COLT-" in italics and stamped with London proof marks on the underside. It is equipped with a Germ...

Manufactured in 1877, this revolver falls into the serial number range of the Second Model and features the long cylinder flutes and locking slots on

Manufactured between 1870 and 1890. German silver half-moon front sight and hammer notch rear sight. The top of the barrel is marked "COLT'...

Manufactured in 1873, the first year of production. The top of the barrel is marked "+COLT'S PT.F.A. MFG. Co. / HARTFORD, CT. U.S.A.+"...