Premiere Firearms Auction

Manufactured in 1956. Hooded ramp front sight and late folding adjustable leaf rear sight, with the receiver drilled and tapped for sight mounts. Stan

Manufactured in 1953. Ramp front sight and early adjustable folding leaf rear sight, with a Leupold 2X7 scope. Standard markings with factory proofs o

Manufactured in 1955. Hooded ramp front sight and sporting type rear sight, with the top of the receiver drilled and tapped for scope mounts. Standard

Manufactured in 1929 with standard markings, a ramp blade front and two leaf folding rear sights. Standard markings. Mounted with a one piece pistol g

Manufactured in 1952 in 220 Swift (approximately 20,000 were produced in this caliber). This deluxe version of the standard rifle features a 26 inch r

Manufactured in 1953. Ramp blade front sight with bead (hood absent), rear sight removed with Marble filler block added and receiver drilled for scope

Manufactured in 1961. The rifle features a varmint barrel drilled and tapped for front sight mounting with single scope blacks at the breech end of th

Manufactured in 1953. Ramp blade front sight with ivory bead and hood and adjustable sporting type rear sight. The receiver is drilled and tapped for

Manufactured in 1958. Hooded ramp front sight and late adjustable folding leaf rear sight. Standard markings with factory proofs on barrel and receive

This is a 1970/80s pattern Browning HP with the "T" prefix serial number. It is engraved in the factory vine and floral pattern covering ...

Manufactured in Belgium from 1970 to 1974. Only 382 Renaissance Medalists were ever produced. Adjustable target sights and gold plated trigger. The R

Manufactured by FN between 1962 and 1974. Patridge front and adjustable rear sights, with a serrated gold trigger, combination safety switch/ dry fire

A) Factory engraved three gun set, all with simulated pearl grips and Renaissance style engraving featuring a vine and floral pattern and complete wit

Manufactured by Fabrique Nationale in Herstal, Belgium. The pistol shows renaissance style floral scroll engraving covering approximately 90% of the g

Standard markings and features of the America's legacy of Liberty Commemorative pistol. Complete with a wood display case, a Browning plastic ca...

Standard markings and features of the First Anniversary Browning Collectors Association Commemorative High Power pistol. Numbered 75 of 100. Complete

Manufactured by FN between 1962 and 1974. This high grade target pistol features a Patridge style front sight and an adjustable rear sight. Serrated g

Blade front sight and notch rear sight, with serrated hammer and smooth trigger. Standard markings and features, with a pair of smooth plastic grips w

A) Manufactured in Belgium and assembled in Portugal. Blade front sight, tangent rear sight, serrated round hammer and checkered grip panels. Complete

Manufactured in 1936 featuring front elevation adjustable and rear windage adjustable sights, "straight taper" barrel marked with the two...

This is a scarce pre-war Woodsman with a King's "barrel weight" conversion manufactured in 1940. The conversion consists of an under-b...

Produced in 1927. Adjustable sights, with the two line address on top of the barrel and "CAL. 22 LONG RIFLE" on the left, with "CAMP ...

Manufactured in 1952. Pinned ramped blade front sight and adjustable rear sight, with the left side of the barrel marked with the two line Hartford ad

Manufactured in 1942. Features fixed front and adjustable rear target sights with a grooved trigger, magazine (marked Colt Woodsman/CAL. 22 L.R.), and

According to the included factory letter, this revolver was one of 2 shipped to E.K. Tryon Jr. & Company of Philadelphia, Pennsylvania on March ...

Manufactured in 1922, this revolver features floral scroll engraving with a matte background covering the upper rear sides of the barrel, frame sides,

Manufactured in 1912, this revolver features factory scroll engraving on the rear barrel sides and scroll and punch dot on the frame sides. The front

The included Colt factory letter confirms the serial number and that although the individual record regarding this revolver could not be found, the re

This pistol was manufactured in 1916, the second year of production, and features the very distinctive "pencil thin" barrel. The left si...

Manufactured from 1920 to 1941, however only 63 experimental/prototype units were made from 1920 to 1926 prior to regular production starting in 1926.

This is the desirable Colt First Series "Match Target" Woodsman pistol as manufactured in 1939. This pistol was the first in the series of...

Manufactured in 1940. Pinned blade front sight and fully adjustable rear target sight. Flat sided heavy barrel marked with the two line Hartford addre

Manufactured in 1960. Features a fixed ramped front sight and an adjustable rear sight. The left side of the frame is marked with the Rampant Colt ov

Manufactured in 1952. Pinned blade front sight and fully adjustable rear target sight. Flat sided heavy barrel. The left side of the frame is marked w

Manufactured in 1935, this revolver is engraved with approximately 25% coverage of open vine scroll without punch dot. The rear sides of the barrel, c

Manufactured in 1934. The Colt factory letter that accompanies the revolver states that it was shipped from the Colt factory to J.J. Galef in New York

Manufactured in 1905, the Second year of Officers Model production. Equipped with the flattop frame, windage adjustable rear sight, elevation adjusta

Manufactured in 1930. The left side of the barrel is marked "38" next to "DETECTIVE / SPECIAL" with the two-line Colt Hartford/p...

Manufactured in 1903. Blade front and square notch rear sights. Barrel has the standard one line caliber marking on the left and the two-line, two-dat

Manufactured in 1931. The top of the barrel is marked with the two line address/patent dates, the left side is marked "COLT POLICE / POSITIVE 3...

A) Made circa 1966-1986. Orange blade front and adjustable rear sights, with "Double COLT/150 Diamond" over the caliber markings on the le...

Produced in 1940, according to the book "Arms & Accoutrements of the Mounted Police 1873 - 1973" by Phillips and Klancher (photocopy i...

This early production Colt New Service revolver was manufactured in 1902. The top of the barrel bears the early style, two line Hartford address with

Manufactured in 1955, the first year of production for the Colt Python. Standard markings, with serrated ramp front and adjustable rear sight. Checker

A) Front blade and notch rear sights, both adjustable. Left side of barrel marked "COLT/ OFFICERS/ MODEL 32/ +HEAVY BARREL+", with two lin...

This is an excellent example of a pre-war 3rd Model (Model of 1926) Smith and Wesson Hand Ejector Target revolver. The accompanying factory letter ver

Manufactured in 1933, this is a very nice example of a Third Model .32 Hand Ejector factory engraved by Rudolph J. Kornbrath. The revolver features sc

Manufactured from 1908 until 1915. This Smith & Wesson revolver features fixed blade and top strap grooved sights, casehardened hammer and trigg...

The included Smith & Wesson factory letter gives a brief history of the Military and Police Model of 1905 revolver and confirms the serial numbe...

Made in 1978 as #46 of a 50-revolver Class A engraved limited edition, the included factory letter confirms the configuration and gives a shipping dat

Manufactured in 1957. The side of the barrel is marked on the right side with "44 MAGNUM" and "SMITH & WESSON" on the left s...

Produced by Smith & Wesson for Lew Horton Distributors. Gold dot raised Patridge front and adjustable rear sights, with standard markings on th...

This pre-Model 18 K-22 Combat Masterpiece revolver was manufactured in 1953. It has a five screw frame, with correct blued ramp front and adjustable

This revolver features a nickel plate finish, front rounded blade and rear notch sights with the barrel marked with the standard Smith & Wesson ...

This Model 29-2 revolver features a 6" barrel and a factory class C engraving. The sides of the frame feature a well executed floral scroll eng...

Manufactured on the K-frame and was the first medium frame revolver chambered for the powerful .357 magnum cartridge. It features a serrated ramp fron

Manufactured from 1908 until 1915. Features fixed blade and top strap grooved sights, casehardened hammer and trigger, 6-round fluted cylinder with a

Ramped serrated front sight with square notch rear sight. Standard markings. Serrated trigger and checkered hammer are casehardened. Checkered walnut

Produced before 1957. Red ramp front and adjustable white outline rear sights, with pinned barrel, 5-screw frame, counterbored cylinder numbered to gu

Manufactured in 1950. In addition to the standard barrel and right side frame markings, the left side of the frame is inscribed To / IND. STATE POLICE

Built on the K-frame and was the first medium frame revolver chambered for the powerful .357 magnum cartridge. This revolver has been engraved with a

Featuring a red insert ramp front with white outlined blued adjustable rear sights, casehardened target hammer and trigger, shrouded ejector rod and c

Featuring a red insert ramp front with white outlined blued adjustable rear sights, casehardened target hammer and trigger, shrouded ejector rod and c

Features a fixed front sight on a solid rib barrel with an adjustable rear sight on the frame. The left side of the barrel is marked "SMITH &am...

A) This five screw model has a Patridge front sight with white dot and adjustable rear sight. Pinned barrel and counterbored cylinder. Casehardened tr

Made in Japan. Standard markings and features of the John Wayne centennial commemorative large loop lever action carbine. Complete with original box n

Numbered "4 of 10" and is engraved by Mark Armstrong. The carbine is gold washed with a hooded front sight and an adjustable buckhorn rear...

Made in Japan. Standard markings and features of the John Wayne centennial commemorative large loop lever action carbine. Complete with original box n

Features a Tru-glo front and adjustable sporting rear sights with standard barrel markings and full length tube magazine. Chambered for 2 1/2 inch onl

Standard markings with a hooded ramp front and sporting rear sights. Full length tubular magazine. Mounted with a checkered forearm and straight grip

A) Part of a matched set. Made in Japan. Standard markings and features of the John Wayne Centennial Commemorative Custom Grade large loop lever actio

Manufactured in 2007 to commemorate the 100th Anniversary of John Wayne's birth. Floral scroll engraved coin receiver with commemorative marking...

Manufactured in 2007 to commemorate the 100th anniversary of John Wayne's birth. Floral scroll engraved coin receiver with commemorative marking...

Gold plated hooded ramp front and adjustable rear sights and barrel bands. Both sides of the barrel depict the Winchester cowboy and "WINCHESTE...

Standard markings with carbine type features of the U.S. National Forests Centennial commemorative. Complete with original box numbered to gun. BBL:

A) Standard markings and features of the Winchester/Colt Commemorative. Complete with a original box numbered to gun, shipping box and hardwood case w

Introduced in 1995 this reproduction of the famous Model 1895 has a blade front sight with brass bead and adjustable buckhorn rear sight. The receiver

Dovetailed blade bead front and buckhorn rear sights. Standard barrel markings. Grape vine engraving on the receiver and two gold deer in a wooded sce

Standard markings and features of the Rocky Mountain Elk Foundation commemorative. Complete with Leupold 3-9 VARI-X II scope, original box numbered to

Gold plated hooded ramp front and adjustable rear sights and barrel bands. Both sides of the barrel depict the Winchester cowboy and "WINCHESTE...

A) Introduced in 1971 with standard markings and features of the NRA Centennial Commemorative. Complete with styrofoam container numbered to gun, pict

A) Standard commemorative markings and features of the Theodore Roosevelt rifle. Consecutively serial numbered to "B" in this lot. Complet...

Standard markings and features of the 75th Anniversary Boy Scout commemorative rifle. Complete with picture sleeve box numbered to gun, manual and han

Introduced in 2002. Tru-glo front and adjustable sporting rear sights with standard barrel markings and full length tube magazine. Chambered for 2 1/2

A) Introduced in 1968, with standard markings and features of the Buffalo Bill Commemorative. Complete with hanging tag, papers, original box numbered

A) Standard features and markings for the Wells Fargo commemorative carbine. Complete with picture sleeve box numbered to gun and papers. BBL: 20 in

Special issue #71 of 1000, standard markings and features. Complete with a unmarked, red velvet-lined case, leather thong and manual. BBL: 18-1/2 in

Introduced in 1995 this limited edition Model 99 was limited to 1,000 rifles. It has the standard centennial markings and features. Complete with orig

Standard markings and features for the 1 of 1000 John Wayne commemorative carbine. BBL: 18 inch round Stock: walnut Gauge: 32-40 Finish: blue/

Hooded ramp front and adjustable rear sights, with barrel marked "The American Bald Eagle" on the left and "A Tribute To Freedom&quo...

Blade front and adjustable rear sights, with barrel marked "A Tribute to Old Glory" on the left and "Stars and Stripes Forever" ...

Manufactured in 1994. Standard commemorative markings and Model 94 features. Complete with original box numbered to gun and box of ammo. BBL: 26 in

Ramp blade front sight with bead and adjustable folding leaf rear sight. The receiver is drilled and tapped for scope mounts and features a factory sc

A) Manufactured in Japan. Blade front sight with brass bead and sporting rear sight. The top barrel flat is stamped "1 OF 3,000" behind th...

Standard markings and features, complete with original box and papers. Also included is a small metal plaque signed by Roy Rogers and a check written

Standard markings and features of the Winchester John Wayne Commemorative carbine with original box with picture sleeve and one box of John Wayne Comm

Adjustable rear sight. Fixed front sight, scroll engraving on the receiver in a floral design and two gold deer in a wooded scene on the left side and

One of 7000 manufactured in 1986 and patterned after the 1886 Winchester. Standard features and markings with dovetail front and adjustable buckhorn r

Manufactured in Japan and patterned after the 1886 Winchester. Standard markings with dovetail front and adjustable ladder rear sights, full length tu

A) Standard markings and features, with factory picture sleeve box numbered to gun, papers and shipping box. BBL: 26 inch octagon Stock: walnut