Premiere Firearms Auction

Six shot barrel cluster with a barrel rib marked "ALLEN & THURBER WORCESTER" followed by "PATENTED 1837 CAST STEEL" on the n...

This is a nice example of a high quality English pepperbox with six-shot fluted barrel. The barrel, frame and bar hammer have a color casehardened fin

German silver frame and blue barrels and hammer. The edge of the nipple shield, frame, hammer, buttcap and backstrap are engraved with a floral scroll

Approximately 7,000 of these Pepperboxes were manufactured from 1851 to 1854 and was an improved version of the George Leonard Jr. patent. Marked &q...

This pistol is a fine example of six-shot English made percussion pepper box. No makers mark or serial number. The casehardened barrel is engraved in

This particular pepperbox is a Worcester production pistol with a six shot .36 caliber barrel cluster with solid ribs and a spur trigger guard. The pi

Manufactured circa 1850s to 1860s. This pepperbox pistol features extensive floral scroll engraving on the muzzle and breech ends of the barrels, fra

A) Manufactured without a nipple shield and with fluted barrels. Four shot barrel cluster with "ALLEN & WHEELOCK" marked on one flute ...

Approximately 7,000 of these Pepperboxes were manufactured from 1851 to 1854 and was an improved version of the George Leonard Jr. patent. Marked &q...

The 6-shot barrel cluster is fluted with alternating crown/GP and crown/V proofs marked on the flutes. There is a percussion nipple shield. The sides

Six-shot barrel cluster without maker markings. The top of the bar hammer is marked "ALLEN'S PATENT", with "ALLEN & THURBER /...

Six-shot barrel cluster marked "PATENTED 1837 CAST STEEL" in one flute, "ALLEN & THURBER WORCESTER." in another and the left...

A) Six barrel cluster marked "PATENTED 18?7 CAST-STEEL" on one of the flat ribs, the top of the bar hammer is marked "ALLEN'S PAT...

This is an example of a Type II, or Model Number 3, derringer manufactured from 1888 to 1911. The derringer has the manual extractor and is marked &...

Manufactured from 1863 to 1888, this blue finished, four shot, .32 caliber pistol uses a cluster of stationary barrels and a revolving firing pin. The

Late production, with extractor. Standard markings on the rib, with blade front and notched rear sights. The barrel, checkered hammer and frame are

This pistol has a design similar to the Remington Number One Vest Pocket Pistol with the following differences: a longer barrel, a blade front sight,

The Type II was manufactured from 1888 to 1911. Marked "REMINGTON ARMS CO. ILION, N.Y." on top of the barrel rib. Blade front sight and no...

Six shot casehardened barrel cluster marked with Birmingham proofs in the flutes and "J.R. COOPERS PATENT" on the left side of the scroll ...

Six-shot barrel cluster is marked "ALLEN THURBER & CO WORCHESTER" on one flute and "PATENTED / 1846." on another flute. The ...

A) Marked "ALLEN & THURBER / WORCESTER" on one barrel rib "1837 CAST-STEEL" on the next. "ALLENS PATENT" is stampe...

Manufactured from the late 1830s to the 1850s. The pistol has a high polish blue finish on the open scroll engraved frame and 6-shot fluted barrel.

Fluted cylinder with Birmingham proofs. Produced without sights, with a ring hammer, top-mounted sliding safety, and a scroll engraved frame marked ...

A) Produced in the 1850s by William W. Marston, under the Union Arms trade name. Fluted six-barrel cluster, with the bar hammer marked "THE UNI...

Manufactured in the late 1850s, this single shot pistol features a centrally mounted hammer, Maynard primer mechanism on the right side of the frame,

Marked "MASS. ARMS CO./ CHICOPEE FALLS" on the top strap, "MAYNARD'S PATENT/ SEP. 22. 1845" on the primer cover and "P...

Also known as the John Brown Model, this Maynard primed belt revolver was manufactured from 1851 to 1857 with about 1000 produced. The 31 caliber, 6 s

Manufactured in 1850 - '51, with a total production of around 1000, this is a scaled down version of Massachusetts Arms Dragoon Model revolver a...

Manufactured from 1868 to 1882, with a total production of about 10,690. The left side of the top strap is marked "MY FRIEND PAT'D. DEC. 2...

Mounted on the back of the knife is an unmarked round barrel with an in-line nipple and hammer with smooth spur. Blade is 4 1/8" long, spear po...

Manufactured by Moore circa 1860 to 1865 and later by National circa 1865 to 1870. Total quantity estimated at 6,000 equally divided between the two c

Colt Third Model or No 3 Derringer with all blue barrel, silver plated brass frame, niter blue screws and varnished walnut grips. The barrel has a hal

Manufactured between 1865 and 1888. The pistol does not have the Remington address marking (common on early production specimens). Matching serial num

A) Manufactured 1866 to 1873. The top of the barrel is marked "SOUTHERNER" and "MERRIMACK ARMS & MFG CO/ NEWBURYPORT, MASS / PA...

Combination double-action revolver and knife with Liege proofmarks. This double-action, six-shot 11M/M pinfire revolver, has a part-octagon barrel wit

This unique pinfire revolver features superposed barrels and a 20 round cylinder with 10 chambers around the outer edge and 10 chambers around the in

This 12 shot pinfire revolver has a Liege ELG proof on the right side of the frame, which has an ejector rod. The front sight has been removed. The el

The only visible markings are Birmingham proofs in each cylinder flute and "C S A" on top of the barrel at the breech end. Pinched front a...

This is a nice example of a French made pinfire double action revolver. It features floral designed engraving on the sides of the frame, cylinder flat

0Made in Belgium, the only visible markings are the number "4" on the rear cylinder face, the letter "A" on the front face and a...

This is an example of a Type I, late production, a.k.a. Model 2 derringer manufactured in 1868 with the manual extractor. The top of the barrel rib ha

Manufactured circa 1860s with total quantity estimated at under 700. Silver plated brass frame marked J.C. TERRY / PATENT / PENDING" on the bac...

Manufactured circa 1870s with a total quantity estimated at 2000. Top barrel flat is marked "XL DERRINGER" and "PAT. APR. 5, 1870&quo...

Produced circa 1880 by C.S. Shattuck of Hatfield, Massachusetts. Blade and notch sights, with the address on the left side of the frame and patent dat

First produced by Moore and than by National from 1865 to 1870, with total quantity estimated at 6,000 equally divided between the two companies. This

A) Manufactured in the 1860s. The barrel has no address marking. The frame and left, right and top barrel flats at the breech feature a factory scroll

This revolver was manufactured between 1861 and 1863 by the Moore's Patent Firearms Co., of Brooklyn, New York. The top barrel flat is roll stam...

A) Manufactured from 1864 to 1870 by the Moore's Patent Firearms Company and the National Arms Company Brooklyn, New York. This particular revol...

Manufactured from 1861-63. The top barrel flat is marked "MANFD FOR SMITH & WESSON BY MOORE'S PAT. FIRE ARMS CO." the cylinder is ...

Manufactured circa 1864 to 1870. Blade front and V-notched hammer rear sights and manufactured without the extractor. The cylinder is marked "D...