Premiere Firearms Auction

Six shot barrel cluster with a barrel rib marked "ALLEN & THURBER WORCESTER" followed by "PATENTED 1837 CAST STEEL" on the n...

This is a nice example of a high quality English pepperbox with six-shot fluted barrel. The barrel, frame and bar hammer have a color casehardened fin

German silver frame and blue barrels and hammer. The edge of the nipple shield, frame, hammer, buttcap and backstrap are engraved with a floral scroll

Approximately 7,000 of these Pepperboxes were manufactured from 1851 to 1854 and was an improved version of the George Leonard Jr. patent. Marked &q...

This pistol is a fine example of six-shot English made percussion pepper box. No makers mark or serial number. The casehardened barrel is engraved in

This particular pepperbox is a Worcester production pistol with a six shot .36 caliber barrel cluster with solid ribs and a spur trigger guard. The pi

Manufactured circa 1850s to 1860s. This pepperbox pistol features extensive floral scroll engraving on the muzzle and breech ends of the barrels, fra

A) Manufactured without a nipple shield and with fluted barrels. Four shot barrel cluster with "ALLEN & WHEELOCK" marked on one flute ...

Approximately 7,000 of these Pepperboxes were manufactured from 1851 to 1854 and was an improved version of the George Leonard Jr. patent. Marked &q...

The 6-shot barrel cluster is fluted with alternating crown/GP and crown/V proofs marked on the flutes. There is a percussion nipple shield. The sides

Six-shot barrel cluster without maker markings. The top of the bar hammer is marked "ALLEN'S PATENT", with "ALLEN & THURBER /...

Six-shot barrel cluster marked "PATENTED 1837 CAST STEEL" in one flute, "ALLEN & THURBER WORCESTER." in another and the left...

A) Six barrel cluster marked "PATENTED 18?7 CAST-STEEL" on one of the flat ribs, the top of the bar hammer is marked "ALLEN'S PAT...

This is an example of a Type II, or Model Number 3, derringer manufactured from 1888 to 1911. The derringer has the manual extractor and is marked &...

Manufactured from 1863 to 1888, this blue finished, four shot, .32 caliber pistol uses a cluster of stationary barrels and a revolving firing pin. The

Late production, with extractor. Standard markings on the rib, with blade front and notched rear sights. The barrel, checkered hammer and frame are

This pistol has a design similar to the Remington Number One Vest Pocket Pistol with the following differences: a longer barrel, a blade front sight,

The Type II was manufactured from 1888 to 1911. Marked "REMINGTON ARMS CO. ILION, N.Y." on top of the barrel rib. Blade front sight and no...

Six shot casehardened barrel cluster marked with Birmingham proofs in the flutes and "J.R. COOPERS PATENT" on the left side of the scroll ...

Six-shot barrel cluster is marked "ALLEN THURBER & CO WORCHESTER" on one flute and "PATENTED / 1846." on another flute. The ...

A) Marked "ALLEN & THURBER / WORCESTER" on one barrel rib "1837 CAST-STEEL" on the next. "ALLENS PATENT" is stampe...

Manufactured from the late 1830s to the 1850s. The pistol has a high polish blue finish on the open scroll engraved frame and 6-shot fluted barrel.

Fluted cylinder with Birmingham proofs. Produced without sights, with a ring hammer, top-mounted sliding safety, and a scroll engraved frame marked ...

A) Produced in the 1850s by William W. Marston, under the Union Arms trade name. Fluted six-barrel cluster, with the bar hammer marked "THE UNI...

Manufactured in the late 1850s, this single shot pistol features a centrally mounted hammer, Maynard primer mechanism on the right side of the frame,

Marked "MASS. ARMS CO./ CHICOPEE FALLS" on the top strap, "MAYNARD'S PATENT/ SEP. 22. 1845" on the primer cover and "P...

Also known as the John Brown Model, this Maynard primed belt revolver was manufactured from 1851 to 1857 with about 1000 produced. The 31 caliber, 6 s

Manufactured in 1850 - '51, with a total production of around 1000, this is a scaled down version of Massachusetts Arms Dragoon Model revolver a...

Manufactured from 1868 to 1882, with a total production of about 10,690. The left side of the top strap is marked "MY FRIEND PAT'D. DEC. 2...

Mounted on the back of the knife is an unmarked round barrel with an in-line nipple and hammer with smooth spur. Blade is 4 1/8" long, spear po...

Manufactured by Moore circa 1860 to 1865 and later by National circa 1865 to 1870. Total quantity estimated at 6,000 equally divided between the two c

Colt Third Model or No 3 Derringer with all blue barrel, silver plated brass frame, niter blue screws and varnished walnut grips. The barrel has a hal

Manufactured between 1865 and 1888. The pistol does not have the Remington address marking (common on early production specimens). Matching serial num

A) Manufactured 1866 to 1873. The top of the barrel is marked "SOUTHERNER" and "MERRIMACK ARMS & MFG CO/ NEWBURYPORT, MASS / PA...

Combination double-action revolver and knife with Liege proofmarks. This double-action, six-shot 11M/M pinfire revolver, has a part-octagon barrel wit

This unique pinfire revolver features superposed barrels and a 20 round cylinder with 10 chambers around the outer edge and 10 chambers around the in

This 12 shot pinfire revolver has a Liege ELG proof on the right side of the frame, which has an ejector rod. The front sight has been removed. The el

The only visible markings are Birmingham proofs in each cylinder flute and "C S A" on top of the barrel at the breech end. Pinched front a...

This is a nice example of a French made pinfire double action revolver. It features floral designed engraving on the sides of the frame, cylinder flat

0Made in Belgium, the only visible markings are the number "4" on the rear cylinder face, the letter "A" on the front face and a...

This is an example of a Type I, late production, a.k.a. Model 2 derringer manufactured in 1868 with the manual extractor. The top of the barrel rib ha

Manufactured circa 1860s with total quantity estimated at under 700. Silver plated brass frame marked J.C. TERRY / PATENT / PENDING" on the bac...

Manufactured circa 1870s with a total quantity estimated at 2000. Top barrel flat is marked "XL DERRINGER" and "PAT. APR. 5, 1870&quo...

Produced circa 1880 by C.S. Shattuck of Hatfield, Massachusetts. Blade and notch sights, with the address on the left side of the frame and patent dat

First produced by Moore and than by National from 1865 to 1870, with total quantity estimated at 6,000 equally divided between the two companies. This

A) Manufactured in the 1860s. The barrel has no address marking. The frame and left, right and top barrel flats at the breech feature a factory scroll

This revolver was manufactured between 1861 and 1863 by the Moore's Patent Firearms Co., of Brooklyn, New York. The top barrel flat is roll stam...

A) Manufactured from 1864 to 1870 by the Moore's Patent Firearms Company and the National Arms Company Brooklyn, New York. This particular revol...

Manufactured from 1861-63. The top barrel flat is marked "MANFD FOR SMITH & WESSON BY MOORE'S PAT. FIRE ARMS CO." the cylinder is ...

Manufactured circa 1864 to 1870. Blade front and V-notched hammer rear sights and manufactured without the extractor. The cylinder is marked "D...

Manufactured circa 1864 to 1870. Blade front and V-notched hammer rear sights and manufactured without the extractor. The cylinder is marked "D...

Also known as the Type I, early production (a.k.a. Model No. 1), this derringer was manufactured circa 1866. Blade and notch sights, spur trigger, cor

Manufactured between 1860 and 1865 with a total production of about 3,000. This particular derringer has the early production top barrel marking (&q...

A) Manufactured circa 1871 to 1890 with a total quantity estimated at 2,000 it is one of the smallest American derringer made. This model is commonly

Produced in the 1890s. Rebated barrel with a band of floral engraving. The removable side plate has a checkered pattern around the edge and address ma

This almost identical period copy of a Remington derringer featuring a scroll engraving on the sides of the frame, backstrap and sides of the top barr

Manufactured from 1865 to 1871, with total quantity estimated at under 2000. This is the First Model with a part octagon barrel marked with the two li

To avoid the Rollin White patent owned by Smith & Wesson this revolver is chambered for .22 rimfire cartridge that fit into separate steel chamb...

Manufactured 1868 - 1882. Groove sight, with "MY FRIEND PAT'D DEC 26, 1865" on the top strap. Full nickel finish, with scroll and pu...

Made circa 1870. Blade sight, with "C. H. BALLARD & Co. / WORCESTER, MASS. / PATD. JUNE 22, 1869" on the left side of the barrel, &quo...

A) This Spanish copy of a Remington over/under derringer has a blade front sight, frame groove rear sight and a manual extractor. The top of the barre

This is an example of a Type II or Model Number 4 Remington over/under derringer manufactured circa 1912 to 1935. The top of the rib is marked "...

Manufactured by Moore circa 1860 to 1865. The top of the barrel is marked "MOORE'S PAT. F.A. CO. BROOKLYN N.Y." and "FEB 24 1863&...

A) Manufactured circa late 1860s. The top strap is marked "HOPKINS & ALLEN MFG. CO. / XL No 4 / PAT. MAR. 28, 1871, APR. 27, 1876". Ma...

Manufactured from 1875 to 1887 this model is similar in appearance to the "XXX Standard 1872" model except it is chambered for the 32 rimf...

A) Third Model manufactured circa 1859 to 1862. The top barrel is marked "ETHAN ALLEN & CO. WORCHESTER, MASS., / ALLEN'S PATS. SEP. 7 N...

Only about 2,300 of these Standard 31 caliber models were manufactured circa 1854 to the late 1860s and features a 7 round cylinder. The top strap is

Manufactured from 1863 to 1864 with a total production of only about 3,000. The top of the barrel is marked "J.D. BLISS. NEW HAVEN - CT" a...

Manufactured circa late 1860s, this XL Number 4 revolver features floral design engraving on the barrel sides front of the frame and on the cylinder f

Blade front sight on an unmarked barrel. The sides of the frame, top strap and the area between the cylinder scopes feature a light floral engraving,

Marked "AMERICAN ARMS CO. BOSTON, MASS." on the top of the .32 caliber barrel "WHEELER'S PAT. OCT. 31. 1865" on the .22 cali...

Colt manufactured approximately 9,000 Second Model Derringers between 1870 and 1890. Standard two line Hartford barrel address followed by "NO ...

A) Colt Third Model or No 3 Derringer with nickel plating and varnished walnut grips. The barrel has a half-moon front sight and is marked "-CO...

German silver blade and hammer notch sights, with "NATIONAL ARMS Co. BROOKLYN. N.Y." on top of the barrel. Barrel and frame are scroll eng...

Produced in the 1890s. Rebated barrel with a band of floral engraving. The removable side plate has a checkered pattern around the edge and address ma

A) Manufactured circa 1869 to 1880 and is a very close copy of the Smith & Wesson 1st Model, 3rd Issue. Standard one line New York address on th...

Six shot barrel cluster with a barrel rib "ALLEN & THURBER WORCESTER" (only visible rib marking). The left side of the bar hammer is m...

The pistol has a Damascus five barrel cluster, without provisions for a percussion nipple shield. A Liege ELG proof is stamped between two percussion

The pistol has a Damascus four barrel cluster, without provisions for a percussion nipple shield. Underhammer double action with ring trigger. The fra

A) Six barrel cluster marked " "ALLEN & THURBER WORCESTER" on a rib, with "ALLEN'S PATENT / 1840" on the hammer. Br...

A) Manufactured circa late 1840s to early 1850s. The barrel cluster has the address and cast steel rib markings, with the patent date on the left side

A) Marked "SUTHERLAND RICHMOND / PATENTED / 1837 / CAST STEEL" starting from the top right flat, with "ALLENS PATENT" on the lef...

A) Produced between 1857 and 1859. Bead sight on barrel, 6-shot unfluted cylinder with scroll engraving and hammer rest. The frame is scroll engraved

A) The top flat is marked "E. HUTCHINGS & CO / AGENTS - BALTO", left barrel flat is marked "CAST STEEL" and the top of the f...

A) Low fixed sights, with the breech plug marked "DERINGER" and the lock marked "C. ROBBINS". Scroll engraved lock and trigger w...

A) Manufactured circa 1857. All open-piece cast iron frame and long bag shaped handle made integral. The patent relief marking is cast on the right si

Manufactured in 1863 and 1864. Marked "B.A.CO. PATENT APRIL 14TH 1863" on top of the barrel. The bottom of the frame is inscribed "F...

Sometimes referred to as the "Seven Shooter" this revolver was only manufactured from 1861 to 1863. Total quantity estimated at several th...

Manufactured circa 1863 to 1863, this revolver is the variant with the standard straight unfluted .32 rimfire cylinder. Less than 100 of these revolve

A) Manufactured circa 1864 to 1870, marked "MOORE'S PAT. FIREARMS CO. BROOKLYN, N.Y" on top of the barrel and "D.WILLIAMSON'S...

A) Manufactured from 1864 to 1870 by the Moore's Patent Firearms Company and the National Arms Company Brooklyn, New York. This particular revol...

The top strap is marked "HOPKINS & ALLEN M'F'G' CO / PAT MARCH 28. 1871 / XL. BULL DOG./ 32 CAL CENTRE FIRE". Nickel finis...

Manufactured circa 1857 with the manufacturer unknown and approximately 750 produced. The New York barrel address is absent. The frame features a scro

Manufactured circa 1860 to 1867 with total quantity estimated at less than 2,000. Pin front and frame groove sights, with a 6-shot cylinder roll engra

A) Manufactured circa mid-1860s, this is an example of a First Model with the distinctive cylinder pin release button on the left side of frame. About

A) This revolver is a First Type, manufactured in the early 1860s with about 400 produced. The cylinder must be removed for loading by withdrawing the

U.S. Contract Smith & Wesson Second Model SChofield revolver with high polish blue finish on the barrel, cylinder and frame. The hammer and trig...

Manufactured 1872-1874 these revolvers were extremely popular on the Western frontier and in Mexico. This model was commonly known as the American 2nd

This Second Model Safety Hammerless is part of a Special Engraved Edition featuring Type 4 scroll and punch dot engraving on the barrel sides, cylinde

According to the accompanying Smith & Wesson factory letter, this revolver was part of a 500-gun order shipped to Wexell & DeGress Co., New ...