Premiere Firearms Auction

Rebated barrel with a band of floral engraving, and the right side of the frame has a similar pattern around the edge, with "THE PROTECTOR PAT....

Manufactured circa 1870. Fixed sights, with the top of the barrel marked "BALLARD'S" and the left flat marked "C. H. BALLARD &...

One of approximately 1000 produced in the 1860s. Manufactured without sights, with the cylinder marked "BACON ARMS CO. NORWICH. CONN." on ...

This Type III was manufactured between 1912 and 1935. The top of the barrel rib is marked "REMINGTON ARMS--U.M.C. CO. ILION N.Y." It has a...

Brass pin front and breech notch rear sights, with "C. SHARPS/ PATENT 1859" and "C. SHARP & Co / PHILADA. PA." on the left a...

German silver blade sight, with "-COLT-" in italics on top of the barrel and "41 CAL" on the left side of the frame. Blue finish...

Silver finished half moon sight, with "-COLT-" in italics on top of the barrel and "41 CAL" on the left side of the frame, with ...

Top strap marked "HOPKINS & ALLEN MFG CO. / XL NO 5 / PAT MAR. 23 1871". Matching serial number on barrel and frame. BBL: 2 1/2 inch...

The top strap is marked "MOHEGAN", trade name was used by the Hood Firearms Company. The barrel, top strap, and cylinder features a zigzag...

Manufactured circa 1870s with a total quantity estimated at 2000. Top barrel flat marked "XL DERRINGER" and "PAT. APR. 5, 1870" ...

Produced 1854-1869, only about 2,300 of these 31 caliber models were manufactured. Cone and notch sights, with the top strap unmarked and "BEAL...

Blade and notch sights, with one line "REMINGTON ARMS CO. ILION, N.Y." address on the barrel rib and serial number on the underside of the...

Produced in the 1890s. Rebated barrel with a band of floral engraving and the frame has a similar pattern around the edge, with the patent marking in

This is an example of a Type II, or Model Number 3, derringer manufactured from 1888 to 1911. The derringer has the manual extractor and is marked &...

Produced circa 1863-1864. Cone and top strap groove sights, with the top of the barrel marked "J.D. BLISS. NEW HAVEN - CT". Matching seria...

Two line address/patent date on the top barrel flat and "XL No 4 NY" on the top strap. Matching serial number on the barrel, cylinder pin,...

Produced between 1903 and 1916. German silver blade front and notch rear sights, with "J. STEVENS A.&T. CO/ CHICOPEE FALLS, MASS., U.S.A.&q...

Manufactured from 1896 to 1916. Globe front and screw adjustable rear sight on a barrel marked with the two line address. Blue with nickel iron frame

Manufactured from 1863 to 1864 with a total production of an estimated 3,000. The top of the barrel is marked "J.D. BLISS. NEW HAVEN - CT"...

Manufactured from 1896 to 1916. Blade front sight with bead and screw adjustable rear peep sight on a barrel marked with the two line address. Blue wi

Manufactured from 1880 to 1882. Standard two line address/patent date marking on the barrel rib. Serial number matches on the frame and barrel latch w

Manufactured from 1870 to 1875. Standard barrel markings, 7-shot cylinder and bird head grips. Serial number matches on the frame and left grip panel.

Made in 1874. Blade and notch sights, with "COLTS HOUSE PISTOL" markings on top of the barrel, patent dates in the sight groove, distincti...

It is estimated that a few thousand of these Second Model Merwin Hulbert spur trigger revolvers were produced. The revolver has the exposed cylinder p

Top strap marked "AETNA 3". Fitted with fancy checkered bird head grips. Matching numbers on frame and both grips. BBL: 3 inch octagon ...

Manufactured circa 1869 to 1880 and is a very close copy of the Smith & Wesson 1st Model, 3rd Issue. Standard one line New York address on the b...

The top barrel flat is marked "RED JACKET NO. 4". Scroll engraved frame sides with a zigzag line and dot pattern engraved on the barrel, t...

This is a fine representative example of a Second Model Maynard carbine, (also known as the Model 1863), manufactured from 1863 to 1865, with approxim

This is an example of one of the 4,200 percussion Civil War carbines converted during the Indian Wars, however not relined to 50 caliber. This carbine

Introduced circa 1875. Breechblock utilizes the John Marlin innovation of reversible firing pin allowing for use of both rim and centerfire cartridges

Manufactured from 1862 to 1865 with many issued to Union cavalry troops in Arkansas, Kansas, Missouri and New York. The lock is marked "STARR A...

Manufactured by H. Merrill of Baltimore, Maryland with a total production of about 14,500. This is a single shot breech loading carbine, loaded by lif

Manufactured in the late 1850s and early 1860s. Standard "STARR. ARMS. Co. NEW. YORK." address on left side of frame, "STARRS PATENT...

Manufactured from 1863-1875. German silver cone front sight and notched rear sight. Brass trigger guard. Single letter inspection marks (M and H) are

Manufactured between 1863 and 1865. The left side of the frame is marked "STARR.ARMS.Co.NEW.YORK." and the reverse is marked "STARR&...

Two thousand of the 3,400 produced were delivered to the Ordnance Department and the revolvers were issued to several Federal Cavalry regiments during

German silver cone front and groove rear sights, with "PETTENGILLS/ PATENT 1856" on the right side of the sighting groove and "PATd J...

Manufactured from 1863 to 1873. The top barrel flat is marked "PATENTED SEPT. 14, 1858 / E. REMINGTON & SONS, ILION, NEW YORK, U.S.A. / NE...

Manufactured by Richardson & Overman of Philadelphia with a total production of about 12,700 in the 50 caliber. This is a single shot, breechloa...

The Model 1853 Slanting Breech Carbine was also known as the "John Brown Model" and was manufactured by Robbins and Lawrence, Windsor, Ver...

Blade front and 3-leaf rear sights, with the rear sight base doubling as the locking point for the breech lever, which has a 2-line patent marking. Th

Produced between 1862 and 1865, this is possibly one of less than 7000 carbines purchased by the Navy for use by Marines aboard ships. This particular

This is a solid example of a Kentucky marked Triplett & Scott carbine that was manufactured in 1865 by the Meriden Manufacturing Company as part...

Purchased by the Ordnance Department circa 1863-1865. Blade front and two leaf folding rear sights, with "CAST STEEL 1864" on the top, and...

Early 19th century U.S. Eagle Pommel officer's saber with 31 3/4 inch blade with unstopped fuller. The sides of the blade have niter blue panels...

Founded in 1860, Pratt & Whitney got its start producing machine tools, in particular for the sewing machine industry and tooling for Civil War ...

Regulation pattern U.S. Model 1860 Saber with 34 3/4 inch single fuller blade rounded back. The blade is stamped "U.S./ G.W.C/ 1865" on t...

1) U.S. Ames Model 1840 Light Artillery Saber made in 1863. The saber has a 32 inch curved single fuller blade with rounded back, with the Ames scroll

1) Ames naval bayonet, 20" single fuller blade with makers mark and "U.S.N. / C.G.S./ 1870" on the ricasso, brass hilt marked "C...

German silver cone front and groove rear sights, with "PETTENGILLS/ PATENT 1856" on the right side of the sighting groove and "RAYMON...

Brass cone front and groove rear sights, with "PETTENGILLS/ PATENT 1856" on the right side of the sighting groove, "PATd JULY 22 1856...

Approximately 23,000 of these revolvers were manufactured in the late 1850s and early 1860s, most of them for the government. Standard "STARR. ...

Manufactured from 1863-1875. Fixed pinched blade front sight and notched rear sight. The top barrel flat is marked "PATENTED SEPT. 14. 1858 / E...

The top barrel flat is marked "PATENTED SEPT. 14, 1858 / E. REMINGTON & SONS. ILION, NEW YORK U.S.A." without "New Model". ...

Manufactured between 1863 and 1865. The left side of the frame is marked "STARR.ARMS.Co.NEW.YORK." and the reverse is marked "STARR&...

This is a fine example of an Indian War Era Model 1865 Spencer Carbine. Fixed blade front sight and folding rear sight graduated to 800 yards. Combina

This is an example of a First Type rifle manufactured from 1859 to 1864. Slotted link on the right side of the frame, breech end of barrel recessed at

Manufactured by H. Merrill of Baltimore, Maryland with a total production of about 14,500. This is a single shot breech loading carbine, loaded by lif

Manufactured circa 1862 to 1865, this is one of only about 500 Model 1862 Army Type carbines made, with approximately 200 ordered by the U.S. Army. Th

Manufactured by the Providence Tool Company, Providence, Rhode Island. Developed and tested during the Civil War the Peabody Carbine entered productio

Manufactured by Edward Gwyn and Abner Campbell of Hamilton, Ohio with a total production of 4,000. The breech end of the barrel is octagon and is fitt

German silver cone front and groove rear sights, with Pettengill and Raymond & Robitaille patent markings surrounding the sight groove. The barr...

German silver cone front and groove rear sights, with Pettengill and Raymond & Robitaille patent markings around the sight groove. Smooth two pi...

Shortly after the Civil War many of these revolvers were converted to accept metallic cartridges. The cylinder was altered and a conversion plate was

Manufactured from 1863 to 1875, this is an example of a Transitional Model of the Remington New Model Army Revolver. Transitional Models have the Old

Approximately 23,000 of these revolvers were manufactured in the late 1850s and early 1860s, most of them for the government. Standard "STARR. ...

Manufactured from 1861 to the mid-1860s with approximately 20,000 produced. Approximately 12,000 were made on government contracts. This particular re

Manufactured circa 1877-1891. Standard two line address/patent dates marking flanked by Maltese crosses on top of the rib and "38 S&W CTG.&...

Manufactured from 1868 to 1881, the No 1 3rd issue is similar to the 2nd Issue with the exception of a fluted cylinder, birds head butt and ribbed bar

Made from 1861 to 1874 the Number Two was a popular personal sidearm among Civil War soldiers. German silver blade front sight and notch rear, with ...

Manufactured from 1868 to 1875, this revolver was possibly engraved by L.D. Nimschke (or his shop) and features floral scroll and punch dot designs on

The Smith & Wesson Model 1 was the first metallic cartridge arm with a bored-through cylinder. This model was produced by Smith & Wesson fr...

Manufactured from 1868 to 1875. Blade and notch sights, with the two line address and patent dates on top of the barrel. Matching serial numbers on th

Manufactured from 1861 to 1874. This model was very successful commercially. It is marked with the one line address on top of the barrel rib and paten

Manufactured from 1865 to 1868. The top of the rib has the two line address/patent dates (1859 & 1865) marking and a blade front sight. Has the ...

Manufactured from 1868 to 1875. This particular revolver has the rare 2 5/8" barrel with the one line address and patent dates on the left side...

German silver front and hammer notch rear sights, with the one line Springfield address on top of the blued barrel, "C" on the rear of the...

The Model 1 First Issue revolver was manufactured by Smith & Wesson from 1857 to 1860 in six various types. This particular revolver is a Model...

Made from 1861 to 1874. German silver blade front sight and notch rear, with "SMITH. & WESSON. SPRINGFIELD, MASS." on top of the barre...

Made circa 1878 - 1892. Pinned half moon and notch sights, with the two line address and patent markings on top of the barrel rib. Matching numbers on

Produced in 1888. Pinned half-moon front and notch rear sights, with the two line address and patent markings on top of the barrel rib. Matching numbe

Produced circa 1877-1891. Standard two line address/patent dates marking on the rib, pinned half-moon front sight and barrel latch notch rear sight. M

Manufactured between 1878 and 1892, this model was the first 32 Smith & Wesson centerfire caliber top break revolver that automatically ejected ...

Manufactured between 1890 and 1898. The top of the barrel rib is marked with the two line address/patent dates with the S&W logo on the right re...

Manufactured from 1895 to 1909. The top of the barrel rib is marked with the two line address/patent dates flanked by Maltese crosses and the S&...

According to information supplied by Smith & Wesson historian Roy Jinks, this revolver was part of a 500-gun order shipped to Wexell & DeGre...

Manufactured from 1886 to 1913. The top of the rib is marked with the two line address/patent dates. Matching serial number on the butt, rear cylinder

According to the factory records (letter included), this revolver was shipped to M.W. Robinson, S&Ws largest distributor, on July 27, 1877, and ...

This is a desirable and colorful variation of the First Model Schofield Single Action revolver. A total of 3,035 of these were manufactured in 1875 wi

The included factory letter confirms the serial number and states that the revolver was shipped to Von Lengerke & Antoine, Paris, France, on Aug...

The included factory letter (dated February 28, 1990) lists this number revolver as having been shipped 9as a blued finish specimen) on May 15, 1885 t

Barrel rib marked "TROCALA ARANZABAL Y CIA EIBAR (ESPANA)", with trademark on the right side of the frame. Fitted with pearl grips. The cy...

This is an example of one of the 2,000 S&W New Model number 3 revolvers sold to the Argentine Government by New York dealers Hartley & Graha...

Improved design of the original Model 3, Smith & Wesson's first top break, automatic ejection revolver produced from 1878 to 1912. Top of ba...

The barrel rib has the two line Orbea Hermanos address/patent date marking followed by "SPAIN" and the right side of the frame has the mak...

Manufactured in 1885, this Model 1873 short rifle is a Third Model with the dust cover operating on the central guide that is integrally machined as p

This Third Model 1876 rifle has the dust cover rail integrally machined as part of the receiver, blade front (bead absent) and sporting type rear sigh

Manufactured in 1906. Pinned blade front and ladder rear sights, with a full length magazine tube and saddle stud with ring mounted on the left side o

Manufactured in 1891, this particular example is a Third Model with the distinctive integral dust cover rail. Blade and sporting type rear sights, wit

Winchester produced only about 25,000 Model 53s from 1924 to 1932. This model was in fact a slightly more modern version of the Model 1892. It was ava