Premiere Firearms Auction

This is a very fine example of a percussion conversion of one of the 3000 Model 1826 Flintlock Navy Pistols manufactured by Simeon North of Middletown

Dated 1848 on the lock plate and tang, with a brass sight blade, "US/ GW/ P" markings and a swiveling ramrod on the barrel. Lock plate is ...

This exceptional example of a .54 caliber, smoothbore, flintlock pistol is one of approximately 18,000 Model 1836 pistols manufactured by Robert Johns

Manufactured by Simeon North of Berlin, Connecticut, circa 1808 to 1810 with a total of 3,000 produced. Significant as a War of 1812 era handgun, the

Model 1836 flintlock pistol manufactured by Robert Johnson of Middletown, Connecticut, in 1842. The Model 1836 pistol was the last flintlock pistol ma

Manufactured by Simeon North of Middletown, Connecticut, circa 1813 to 1815 with total quantity approximately 1,626 (around 1,000 delivered to the U.S

Produced various contractors for the U.S. Military between 1836 and 1844. Brass blade front and "U" notch rear sights, with the barrel mar...

Manufactured by Henry Aston & Co. in 1847. This pistol has a 54 caliber, 8 1/2 inch smoothbore barrel with a swivel, button head ramrod. The loc...

Manufactured from 1817 to 1820 with a total production of about 19,374. The lock plate is marked with the later type marking: "S. NORTH ( faint...

Manufactured by Simeon North of Middletown, Connecticut, in 1827. North manufactured a total of 3000 of these pistols between 1826 and 1829 and most w

Manufactured from 1836 to 1844 with a total production of about 41,000. Marked "A. WATERS & Co / MILBURY. MS. / 1837" on the lock pl...

Manufactured by Simeon North of Middletown, Connecticut between 1819 and 1823. The Model 1819 Pistol features a unique, sliding safety bolt located be

This .54 caliber, smoothbore, flintlock pistol is one of approximately 18,000 Model 1836 pistols manufactured by Robert Johnson of Middletown, Connect

Manufactured in the mid-1840s to 1849, this single shot percussion pistol was manufactured by A. H. Waters & Co., Milbury, Massachusetts and is ...

This is a very fine original example of a U.S. contract Model 1842 percussion pistol that was manufactured by Henry Aston of Middletown, Connecticut i

This is an example of a U.S. contract Model 1836 flintlock pistol that was manufactured by Asa Waters of Millbury, Massachusetts, in 1838. The pistol

Manufactured in the mid-1840s to 1849, this single shot percussion pistol was manufactured by A. H. Waters & Co., Milbury, Massachusetts and is ...

Manufactured from 1817 to 1820 with a total production of about 19,374. The lock plate is marked with the later type marking: "S. NORTH (in a d...

Marked "US / I.N. JOHNSON" on the lock plate in front of the hammer, "MIDDTN / CONN / 1855" vertically at the rear. The tang is ...

Brass blade front and groove rear sights, with "US./ JCB/ P" on top of the breech and "H" on the left flat. The lock is fitted w...

This Model 1842 percussion pistol was manufactured under U.S. Government contract by Henry Aston of Middletown, Connecticut, in 1851. The pistol has t

The lock plate is stamped "US / H.ASTON & CO." in front of the hammer and "MIDDtn / CONN / 1852" vertically behind the hamme...

Converted to percussion with a cone alteration. Lock plate is marked with an eagle head over "A.H. WATERS & CO / MILBURY MASS / 1844"....

This is an example of one of the only 600 Type II Springfield Model 1817 martial pistol, which was later converted to percussion using the drum style

Manufactured by Simeon North of Middletown, Connecticut, circa 1813 to 1815 with total quantity approximately 1,626 (around 1,000 delivered to the U.S

Manufactured by Simeon North from 1819 to 1823 with a total production of 20,400. This pistol is one of many that were converted to percussion after m

Manufactured from 1836 to 1844 with a total production of about 41,000. Marked "eagle head A. H. WATERS & Co / MILBURY. MASS. / 1844"...

This is an example of a Model 1836 flintlock pistol manufactured by Robert Johnson of Middletown, Connecticut, in 1842. The Model 1836 pistol was the

Model 1842 Navy percussion Pistol from the lot of 1200 pistols manufactured by Henry Deringer of Philadelphia between 1842 and 1847. The Model 1842 N

Produced circa 1830-1831, this is one of less than 1000 Model 1826 Navy Flintlock Pistols produced by W.L. Evans of Valley Forge, PA. Brass blade fron

Blade front sight, with the rear sight base moved from the barrel to the tang, "V/ P/ eagle head" on the left flat and "1855" on...

Manufactured circa 1817 to 1820. The lock plate has the later type marking: "NORTH (in a downward curve) over an American eagle motif with &quo...

Brass blade front and groove rear sights, with "US./ JH/ P" on top of the breech and "B" on the left flat. The lock is fitted wi...

Manufactured circa mid-1840s to 1849 with total quantity unknown. This pistol represents an enigma for today's collectors. This pistol was not o...

Produced between 1836 and 1844. Brass blade front and "U" notch rear sights, with the barrel marked "U.S./ JA/ P" and "S&qu...

This massive flintlock shotgun features an unmarked barrel with a blade front sight and muzzle measuring just under 1 1/4" across. The lock is ...

The upper left barrel flat is marked with two cross scepter proofs and an unidentified proof. There are no other markings. Single bead sight on a barr

Receiving a royal charter in 1600, the Governor and Company of Merchants of London trading with the East Indies, later shortened to the Honorable Eas

The lock plate is marked with an eagle above "US". The left side of the barrel has three U.S. proof and inspection marks at the breech, wi...

Marked "1857" and "US / 88" on the barrel tang, and "REMINGTON'S / ILION, N.Y. / 1857 / U.S." vertically behind t...

Brass blade sight on the front barrel band, with a bayonet lug on top of the muzzle, a "P" stamp at the breech, and "S.N.Y" next...

This is a Revolutionary War era Transitional style Kentucky Rifle that appears to be the work of Wolfgang Haga. Wolfgang Haga was a gunsmith in Readin

Manufactured by L.C. Kersey in Red Bluff, California circa 1860s. The top of the barrel is marked "L.C. KERSEY RED BLUFF, CAL CAST STEEL"....

Marked "PHILLIP WILSON & CO PHILADA CAST STEEL 148" on the top barrel flat behind the rear sight and stamped "402" on the mu...

Brass blade and adjustable notch rear sights on an octagonal marked "A. WURFFLEIN / PHILA" on the left flat and scroll and double gold ban...

This is an elaborate example of an engraved, gold inlaid Moore percussion rifle with ornate silver mounted stock. The muzzle and breech ends of the ba

Active from 1832 to 1837, the firm of George Tryon and Samuel Merrick operated out of Philadelphia, where Tryon would remain and through his son, Edwa

Marked "DREPPARD/ LANCASTER" on the barrel and lock plate. In addition there is floral engraving on the lock and hammer. John Dreppard wor...

The only visible marking on the rifle is "H GIBBS" on the top barrel flat behind the rear sight. There were two Henry Gibbs Gunsmiths in L...

Golden Age Kentucky Rifle signed master gunsmith John Armstrong of Emmittsburg, Maryland. John Armstrong worked as a gunsmith from about 1808 to 1822;

This percussion converted (most likely Pennsylvania) rifle features fixed sights on a barrel marked "J Sea illegible)" on the top flat. Th...

Fixed sights on a barrel marked "LEMAN LANCASTER WARRANTED" on the top flat which is also engraved at the breech and muzzle. Scroll engrav...

This percussion converted rifle has fixed sights on a barrel marked "A. GIBBS / LANCASTER" (faint). The lock plate and hammer have a light...

Blade front sight and a removed rear sight (slot not filled) on a barrel marked "DREPPERD / LANCASTER" on the top flat. Equipped with an a...

Blade front and notch rear sights, with "TEAFF" marked behind the rear sights. Research shows a number of Teaffs in the Ohio arms trade (h...

The only visible marking on the gun is a faint "DREPPERD" on the lock and "C Liple" on the top barrel flat behind the rear sight...

The only visible marking on the gun is "WELSHHANS" on the top barrel flat behind the rear sight. Consignor notes state that it was manufac...

Fixed sights on an unmarked barrel. The lock plate and hammer feature a simple engraving and the lock plate is marked "LONDON / WARRANTED"...

Fixed sights on a barrel marked "DREPPERD. / LANCASTER" on the top flat. The lock plate is marked "BAKER & MOSS". In the boo...

The lock is marked "BY / ASKEW PAXSON" and the top of the barrel is marked "M Fordney". Melchior Fordney was one of 10 Fordneys ...

Converted back to its original flintlock configuration, this rifle features fixed sights on a barrel marked "P. GONTER" on the top flat. T...

Fixed sights with no visible maker marking with "starburst" and cross designs behind rear sight. The forend cap, ramrod pipe, stock wedge ...

Converted back to its original flintlock configuration, this rifle has a uniquely rifled bore that measures at approximately .69 caliber, has fixed si

Brass blade front and notch rear sights, with "GMH" scratched into the top flat and 2 sets of decorative bands ahead of the rear sight. Lo...

Fixed sights on a barrel marked "GIBBS / LANCASTER / PA" on the top flat. The lock plate is marked "Henry Parker / Warranted". I...

Fixed sights on a barrel marked "H. GIBBS / LANCASTER / PA" on the top flat. The lock plate has a partial marking: "LCHER" (like...

Fixed sights on a barrel marked "LANCASTER PA" with a crudely restamped name (possibly J. F. Ortney). The lock plate has a partial marking...

Fixed sights on a barrel marked "J. Fordney / LANCASTER PA". The lock plate features a light floral engraving and is marked "JAS GOLC...

Manufactured circa 1850, the lock is marked "JOSH GOULCHER" ahead of the hammer and engraved with light scroll designs. The barrel is equi...

Filed down blade front sight and fixed notch rear sight, with a faint makers signature on the top flat. The lock is marked "G. GOULCHER", ...

The barrel is marked "WEST CHESTER" on the top flat near the breech. Floral scroll engraved lock plate, trigger guard, breech plug and upp...

This percussion coveted rifle features fixed sights on a barrel marked "H. GIBBS / LANCASTER PA" on the top flat. In AMERICAN GUNSMITHS, f...

Blade front and adjustable rear sights on a barrel marked "LEMAN / LANCASTER PA" and "WARRANTED" on the top flat and a filled do...

Combination beach front sight and a dovetail slot in front of the replacement Winchester style ladder rear sight on a barrel marked "H. GIBBS /...

Top of octagonal barrel is marked (signed) in script, "PETER HUMBARGER". Silver Rocky Mountain blade front sight and adjustable sporting r...

Single German silver bead sight, with a fine Damascus twist pattern to the barrels, light engraving at the rear of the rib, a Liege proof on the under

This massive 4 bore double barrel hammer shotgun weighs in at 24.1 pounds. Marked "CHARLES BOSWELL MAKER. 126. STRAND. LONDON. W.C." on th...

Marketed circa 1888, the Pieper Mitrailleuse was marketed towards game and market hunters, and boasted a 3' pattern at 125 yards. Bead and 2-lea...

Starting in the first half of the 19th century as Hollis Brothers & Company, Hollis & Sons was a supplier of pistols and shotguns, and also ...

This massive shotgun features 42 inch barrels with a single bead sight on the solid concave rib which is marked "GEO BATE. 152. STEELHOUSE LANE...

Massive 8 gauge slug double barrel rifle marked "MANTON & CO GUN MAKERS TO H.R.H. THE" on top of the breech end of the left barrel and...

Made by the Midland Gun Company in Birmingham, this 8 gauge Punt Gun features a Damascus barrel with a single brass bead sight, with the rear 4 3/4&...

Manufactured circa 1880s. Single bead sight on the solid concave rib which is marked "LONDON STUB TWIST" and the bottom of the barrels are...

Single silver bead sight on the smooth rib, which is signed "Joseph Manton PATENT (illegible word)", and each side of the breech is marked...

Single bead front sight on a solid rib marked "H. SNOWIE, INVERNESS." near the breech with Damascus barrels. Scroll and border engraved lo...

The hammers and lock plates feature a light floral engraving with "EDWIN HUNT" marked on both lock plates. In AMERICAN GUNSMITHS, noted fi...

Single bead sight on a concave solid rib marked "LAMINATED STEEL". Light scroll engraved lock plates marked "BROWNSON SLOCUM & / ...

Single bead sight on the solid concave rib marked "LONDON STUL TWIST" with two gold inlaid bands on the breech end. The locks and hammers ...

This very heavy percussion 8 gauge shotgun was the type used by market hunters to kill large quantities of birds with one shot. Most makers along the

Dated 1833 on the side of the forearm, arms of this size were often used by small defensive fortifications as a midway between the muskets and cannons

Shrouded pin front and notch rear sight on a barrel marked "J.J. REEB, HOF-BUCHSENMACHER. BONN. A/RH" on the top flat. J.J. Reeb was a Ger...

This large percussion, muzzle-loading whaling gun for shoulder firing whale harpoon or an explosive whale bomb lance, circa mid-1850s. Although Allen

Blade front and folding ladder rear sights, with a bayonet lug on the right side near the muzzle, "St69" and "Ga" on top of the ...

No visible markings, possibly Belgium in origin, blade sight on the solid rib, lightly engraved locks, hammers, barrel tang and trigger guard, hammer

No visible makers marking, lightly scroll engraved locks, hammers and barrel tang, with scallop border on the locks and silver inlaid bands on the bre

No visible makers marking, lightly scroll engraved locks, hammers and barrel tang. Single bead sight on the wide solid rib, Damascus pattern barrels,

The solid barrel rib is marked "IMPORTED BY ALEXANDER McCOMAS NO. 51 S. CALVERT ST BALTIMORE", with Damascus barrels. The lock plates are ...

Single brass bead sight, with "EATON & ABBEY, CHICAGO - LAMINATED STEEL" on top of the rib, light scroll engraving on the casehardened...

Single bead sight on a solid concave rib marked "MOORE & HARRIS, LONDON. LAMINATED STEEL". Light scroll engraved hammer and lock plate...

Manufactured in 1848, this revolver was manufactured as a 4 inch barrel variant without the loading lever and the round cylinder stops. The top of the