Premiere Collector's Firearms Auction

The cylinder is unfluted and has a capacity of six rounds chambered in 11 mm Perrin. The right front of the frame is marked "PERRIN / & Cie...

A) No maker markings with British proofs on the barrel and between the numbered cylinder chambers. Has a hammer safety and two- piece checkered grips.

A) Crown/crown/U late 19th Century proofs on the cylinder, and frame with two crowns stamped on the bottom barrel flat. There are no maker markings. F

A) This Colt 2nd Model 1848 Dragoon Revolver was manufactured in 1850. This revolver is one of a lot of three pistols that reportedly were purchased b

Manufactured in 1853, this Model 1851 Navy revolver features factory floral scroll, Gustave Young Shop engraving covering the sides of the barrel lug,

Manufactured in 1861, the second year of production. This revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the fl

Manufactured in 1866. The top of the barrel has the one line New York U.S. America address, "COLTS / PATENT" on the left side of the frame...

Manufactured in 1857. Cone front and groove rear sights, with the two line, two block barrel markings with Maltese crosses and pointing hand on the to

Manufactured in 1863. One line New York U.S. America barrel address, "COLTS / PATENT" on the left side of the frame, and "36 CAL"...

Manufactured in 1861, the first year of production. One line New York barrel address, "COLTS / PATENT" on the left side of the frame, stag...

A) Colt manufactured these London revolvers between 1853 and 1857. This particular revolver was manufactured in 1856 and has the large round iron trig

This is an outstanding example of a Colt Model 1855 revolving carbine. Also known as the Model 1855, which quickly became known as the "Root&qu...

Manufactured in 1867 with a three screw frame, brass blade sight on a barrel marked "-- ADDRESS COL. SAML COLT NEW-YORK U. S. AMERICA --"....

Manufactured in 1872 this pocket revolver was factory chambered for the .38 centerfire cartridge using left over Model 1862 Police Percussion parts. S

Manufactured in 1862 for the U.S. Government under contract by Colt. Four screw frame cut for a shoulder stock, marked "COLTS / PATENT" on...

This is a nice representative example of a scarce U.S. Colt First Model Dragoon Revolver that was manufactured in 1849. The revolver has the distincti

A) The frame is machined at the recoil shield and is fitted with a conversion plate that is notched for the centerfire firing pin and features a loadi

This is an example of a Colt factory engraved, Model 1851 Navy Revolver that was manufactured just prior to the Civil War in 1860. This early Fourth M

Made by H. Keller of Corpus Christi, Texas circa 1878-88 and is designed for a 7 1/2" barreled single actioned revolver. Reminiscent of the &qu...

This is a beautiful example of a deluxe engraved 1849 Pocket Revolver as manufactured in 1854 with the scarce 5 inch barrel length. Although not speci

Also known as the Second Type Richards Conversion of the Model 1860 Army revolver, this conversion is done without the rear sight on the breech plate,

Manufactured in 1859. The top barrel flat is marked with the pointing finger, "COLT'S PT. / 1855" flanked by Maltese crosses and "...

This is an example of a Two-Digit number (52) Colt Revolving Shotgun that was manufactured in 1860. Data from R.L. Wilson's "The Book of Co...

This is an example of a scarce Colt 1855 Revolving Carbine manufactured from 1856 to 1864 with a total production of only about 4,400. The top strap i

Manufactured 1856-1864. Part of a line of revolver-type long arms which enjoyed some success, but in many ways was ahead of its time. The top strap is

This is a 3rd Model 1851 "Army-Navy" revolver in the 42000-80000 serial number range which were purchased by the U.S. Army prior to the Ci...

A) Manufactured in 1864. One line New York barrel address, "COLTS / PATENT" on left side of frame, "31 CAL" and "3" on...

Manufactured in 1958. The top barrel flat is marked "{ ADDRESS SAML COLT / NEW YORK CITY}", the left side of the frame is marked "COL...

Manufactured in 1849. The top barrel flat has the two line New York address flanked by dashes, "COLTS / PATENT" is stamped on the left sid...

Made for a Colt percussion revolver, this Main & Winchester Slim Jim Holster features an open top and open toe and is made for the left side of ...

This Third Model 1851 was manufactured in 1856. First type barrel marking ("--ADDRESS SAML COLT NEW YORK CITY--"), "COLTS / PATENT&qu...

A) Manufactured in 1853. Two line Hartford barrel address inside brackets, "COLTS / PATENT" on left side of frame, and stagecoach holdup c...

Factory converted Colt Model 1861 percussion revolver to be used with rimfire cartridges made, in most cases, using new parts. Loading lever removed a

Manufactured in 1862. Three screw frame cut for a shoulder stock marked "COLTS / PATENT" on the left side. The barrel has the one line New...

A) Manufactered in 1860. Two line Hartford barrel address, COLTS / PATENT" on left side of frame, "M" on left trigger guard shoulder,...

The top barrel flat is marked "COLT / BREVETE" with a crown/letter proof on the left side of lug and the serial number on the underside of...

A) Manufactured circa 1859-68. This revolver is a Series V with the six shot cylinder with the standard engraved oval panels and marked with the 1859

A) Second Model manufactured from 1864 to 1869 while the company was located in Philadelphia. Three line address/patent dates (1851-1863) marking on t

A) Produced mainly in Belgium, the term "Brevete" can be applied to any revolver made under license by Colt using one or more of their pat...

Manufactured in 1885. The top of the barrel is marked with the two line Hartford address. There is no visible caliber marking. Serial number on butt w

Manufactured in 1880 with the rare 4 inch barrel. Fixed and notched sights with the top of the barrel stamped with the two line Hartford address and e

Manufactured in 1872. Two line "COLT HOUSE PISTOL" marking flanked by Maltese crosses on top of the barrel, with matching numbers on barre...

Manufactured in 1876. The top of the barrel has the two line Hartford address, patent marking on the barrel underside, and etched "COLT NEW 41&...

Manufactured in 1876. Top of barrel has the two line Hartford address along with a factory engraved dot and line pattern and the right side of the bar

Second Model, produced in 1877. Nickel finish with bird head grips. Standard two line Hartford barrel address, etched "COLT NEW 38" on the...

A) Manufactured in 1875. Features short flutes with locking notches behind the flutes. Two line Hartford address on top of the barrel flanked by Malte

Manufactured circa 1875-1912, this derringer has a custom engraving. Top of barrel marked "-COLT-" in large italicized letter and serial n...

Manufactured form 1870 to 1890. Standard two line Hartford barrel address flanked by Maltese crosses with "No. 1" at the breech. Matching ...

Manufactured in 1871, the first year of production, with an integral ejector. The top of the barrel has the two line Hartford address flanked by Malte

Manufactured in 1880. Features long cylinder flutes with locking slots on the back. Two line Hartford address on top of the barrel, etched "COL...

Second Model, produced in 1875. Nickel finish with bird head grips. Standard two line Hartford barrel address, etched "COLT NEW 38" on the...

Manufactured in 1874. Features short flutes with locking notches on the periphery just behind the flutes. Two line Hartford address on top of the barr

Manufactured in 1884. Two line Hartford address on top of the barrel, acid etched caliber marking on left side of barrel, and "38 CAL" on ...

A) Manufactured in 1876. Features long cylinder flutes with locking slots on the backs. Two line Hartford address on top of the barrel, etched "...

Manufactured in 1884. The top of the barrel has the two line Hartford address marking with the left side of the barrel etched "NEW POLICE 38&qu...

Manufactured in 1881. Two line Hartford barrel address with "COLT NEW 41" etched in a panel on the left side of barrel and the patent date...

Manufactured in 1871, the first year of production, with an integral ejector. The top of the barrel has the two line Hartford address flanked by Malte

Manufactured form 1870 to 1890. Standard two line Hartford barrel address flanked by Maltese crosses with "No. 1" at the breech. Matching ...

Manufactured in 1877 with a loading gate. The top of the barrel has the two line Hartford address, patent marking on the barrel underside, and etched

Manufactured in 1875. Two line Hartford address on top of the barrel and "COLT NEW 30" etched in a panel on the left side of the barrel. &...

A) Manufactured in 1877. Features long cylinder flutes with locking slots on the backs. Two line Hartford address on top of the barrel, etched "...

Manufactured in 1909, this is an exceptional example of a Colt Bisley Model Single Action. Fixed front sight with a polished feathering pattern on eit

Manufactured in 1908, this is one of only 976 Bisley Flattop Target revolvers manufactured by Colt between 1894 and 1913, with only 131 made in this c

Very few events in the annals of the Old West have been more portrayed in movies and publications, and documented then the "The Fight at The OK...

This is an attractive example of a very desirable pre-war Colt SAA that was made in 1913, that originally was factory recorded as follows: 45/c, 4 3/4

This is a nice example of a custom engraved, nickel plated Colt Single Action Army revolver with checkered ivory stocks and fitted relined custom case

According to factory records (letter not included), this revolver was shipped to Hartley & Graham of New York City on 23 December 1892. Fixed si...

Made in 1877 in the "Storekeeper" configuration, properly lacking the ejector assembly. Fixed sights, with the two line address on top and...

Manufactured in 1898. The top of the barrel is marked with the one line address, the left side "COLT FRONTIER SIX SHOOTER .44-40" and the ...

Accompanied by a factory letter which confirms the configuration and list the shipment on August 25, 1880 to J.T. Norton as a shipment of two revolver

Made in 1901. Fixed sights and crescent ejector, with the one line Hartford address and "45 COLT." on the barrel, two line/ three date pat...

Manufactured in 1909. The top of the barrel is marked with the one line address, the left side "38 W.C.F." and the left side of the frame ...

Manufactured in 1903. One line Hartford barrel address and two line patent date with circled rampant colt on left side frame. Barrel gauges at .32 cal

Manufactured in 1927. Fixed sights, with the one line Hartford address on top of the barrel and "38 W.C.F." on the left side, with the two...

The included Colt factory letter confirms the serial number, caliber, barrel length, blue finish, and hard rubber grips and that the revolver was ship

According to the included factory letter, this revolver was shipped on 20 January 1920 to Shapleigh Hardware of St. Louis, Missouri, with all features

Manufactured in 1897. The top of the barrel is marked with the two line address, the left side is marked "45 COLT" and the left side of th...

According to the included factory letter, this revolver was part of a 20-piece order shipped to Simmons Hardware Company of St. Louis, Missouri on 18

Manufactured in 1900. The top of the barrel is marked with the two line address, "38 W.C.F." on the left side, with the two line, three p...

Originally produced in 1885, and later arsenal overhauled for reissue. Fixed sights, with the one line 'elongated block' Hartford address, ...

Manufactured in 1902. The top of the barrel is marked with the one line address, "(BISLEY MODEL) 41 COLT." on the left side and the left s...

Two piece 50 count box of 38 Long Colt 150 grain smokeless centerfire cartridges made by Winchester. Red label with black lettering. BBL: Stock:

Manufactured in 1913 and subsequently custom engraved by Schuyler, Hartley & Graham, (according to consignor notes). The revolver features flora...

Manufactured in 1891 and subsequently custom engraved in the mid-20th century. The accompanying factory letter verifies the serial number, caliber, bl

Manufactured in 1927. The top of the barrel is marked with the one line address and the left side is marked "38 COLT". The left side of th...

Manufactured in 1906. Blade front and groove rear sights, with "COLT'S PT. F.A.MFG.Co. HARTFORD CT.U.S.A." on top of the barrel, "...

Originally produced as a Colt SAA Revolver in 1901, this revolver was converted to 22 Long Rifle by gunsmith Alonzo Crull in the mid-20th century. Ope

Manufactured in the early 1980s. The revolver features floral scroll engraving with punch dot background on the barrel, outer edge of the ejector hous

Consignor states this revolver has been custom engraved by Mike Gouse, the factory engraver for High Standard. It features the standard contrasting bl

Standard features. One lined address roll engraved on the barrel. The loading assembly, frame, and hammer are casehardened. Brass trigger guard and ba

Standard blade and target sights, one line address on the top of the barrel and model marking on the right, the left side is marked with a gold inlai

A) These consecutively serial numbered Colt Sheriff's Model revolvers are marked with the two line address on top of the barrel, "COLT SHER...

Manufactured in 1958, Colt manufactured approximately 3,900 of these Buntline Specials in 17 years. The "Buntline Special" was named after...

Manufactured in 1969. The top of the barrel is marked with the one line address, "COLT SINGLE ACTION ARMY .45" on the left side and the le...

Manufactured in 1959. Standard one line Hartford address on top of the barrel, caliber marking on left side of barrel, and two line patent date with r

Manufactured in 1967. Standard markings, with matching serial numbers including grips. Checkered grips with rampant colt at the top. BBL: 4 3/4 inch

Manufactured in 1970. The top of the barrel is marked with the one line address, "COLT SINGLE ACTION ARMY .45" on the left side and the tw...

Manufactured in 1957. Standard markings including "COLT SINGLE ACTION ARMY .38 SPECIAL" on left barrel side. Matching numbers on frame and...

This is a beautiful example of a factory engraved Colt Single Action Army Revolver with an unusual special order 4 inch barrel. The revolver features

This revolver was donated to the Elizabeth Colt Legacy Foundation Raffle at the Colt Collectors Association 2009 Annual Show in Concord, North Carolin