The Premiere Firearms Auction of the Year.

This is an outstanding example of a Colt Model 1851 Navy revolver manufactured in 1861 with factory Number 2 engraving by Gustave Young or his shop. T

Manufactured in 1862. The top of the barrel flat has the one line "ADDRESS COL SAML COLT NEW-YORK U.S.AMERICA" marking, the cylinder is r...

This is a nice example of a 3rd Model 1851 Navy-Army revolver manufactured in 1856 in the 42000-80000 serial number range purchased by the U.S. Army p

Model 5 version, produced circa 1862. Front post sight with notch rear sight, marked with the two line New York address on top of the barrel, patent

Manufactured in 1863, with a 3 screw frame cut for a shoulder stock. The top of the barrel has the one line New York U. S. America address flanked by

This completely original revolver is one of only 3 known to exist in this, its 100% original configuration. It is accompanied by extensive documentati

This is an extraordinary custom made copy of one of the elaborate Gustave Young embellished Colt revolvers of the 1850's era. This extremely orn...

This exceptional gold and silver engraved Dragoon revolver is one of reportedly 50 produced by the Heritage Guild to commemorate the renowned American

This is a representative example of a Colt small frame Model 1855 Revolving Shotgun manufactured circa 1860 to 1863. The shotgun has a .60 caliber (20

Chiefly produced with 18 and 21 inch barrels, very few are known to have been made in this short barreled configuration. The serial number, "6&...

This Colt Model 1855 Military Rifle was made with five-shot fluted cylinder and 37 1/2-inch round barrel with semi-octagonal section at the breech. Co

This is an example of a very desirable Colt Model 1855 Deluxe full stock revolving Rifle manufactured from 1856 to 1864 that was subsequently converte

Colt manufactured approximately 1,500 of these half stock sporting rifles between 1857 and 1864. The top strap is marked "COLT'S PT / 1856&...

The Model 1855 was manufactured from 1856 to 1864 with few made in the carbine configuration. This example has a blade front sight with graduated fold

Colt manufactured approximately 1,100 of these revolving shotguns in both 10 and 20 gauge between 1860 and 1863. The top strap is marked, "COL....

8 inch powder flak with the top marked "1857" and "A.L.K. / WUJ" on one side and "BATTY / SPRINGFIELD MASS" on the oth...

Three James Dixon & Sons produced powder flasks with the following features: 1) 6 3/4", dead small game motif on one side, measuring spout;...

Four powder flasks with the following features: 1) Hawksley "net flask", 7 1/4", measuring spout; 2) "B.A. PARIS" marked, 6...

Seven powder flasks with the following features: 1) Unmarked, 4", oak leaf motif on both sides, two compartments; 2) Unmarked, 3 3/4", E. ...

1) Colt bullet mold, 31 caliber, brass body marked "31/PKT" on the side, "COLT'S/ PATENT" marked steel cutter, 2 cavity. 2) ...

1) Colt bullet mold, 44 caliber, brass body, steel cutter, 2 cavity. 2) 36 caliber Colt mold, steel construction, standard markings, 2 cavity. 3) Colt

Produced in 1858, with the distinctive four-screw frame, recoil shield cutouts and folding leaf rear sight. The shoulder stock is the third pattern, w

Manufactured in 1857, this revolver is one of Colt Model 1851's that was purchased by the U.S. Army prior to the Civil War. These U.S. Colt Mode...

Manufactured in 1862, with a 3 screw frame cut for a shoulder stock. The top of the barrel has the one line New York U. S. America address flanked by

This is an excellent example of a rare factory silver plated Model 1849 Pocket revolver that was manufactured in 1854. The top barrel flat is marked...

This Colt Model 1860 Army revolver was manufactured in 1873; the last year of production for this percussion revolver. The revolver has a high polish,

Manufactured in 1856. The top barrel flat is marked "COLT'S PT. / 1855" followed by " ADDRESS COL. COLT / HARTFORD CT U.S.A.&qu...

1) Box of fifty United Stated Cartridge Company .44 caliber cartridges labeled " CAL. 44 COLT/RIFLE CARTRIDGES/ CENTRAL FIRE". Box top and...

Manufactured in 1860, the first year of production, this revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the flu

Manufactured in 1863, this revolver is marked with the one line New York City U.S. America address with dashes at each end, marked "COLT'S ...

Manufactured in 1863, with a 3 screw frame cut for a shoulder stock. The top of the barrel has the one line New York U. S. America address flanked by

Manufactured in 1868. The top of the barrel flat has the one line "ADDRESS COL SAML COLT NEW-YORK U.S.AMERICA" marking, the mis-matched c...

The revolver has the two line Hartford barrel address, two line two July patent dates on the frame, "36 CAL" on trigger guard, and the sta...

This is an example of a factory cased Colt Model 1849 percussion Revolver manufactured in 1857. The revolver has a four-inch octagon barrel with caseh

Manufactured in 1865. Standard New York barrel address, "COLTS / PATENT" on left side of frame, and the Texas Navy scene on the cylinder. ...

Manufactured in 1861, the first year of production, this revolver is period inscribed "Col. H.A. Smalley / from his State". An internet se...

Manufactured in 1863, with a 3 screw frame cut for a shoulder stock. The top of the barrel has the one line New York U. S. America address flanked by

This Pocket Navy conversion revolver has the 4 1/2" round barrel with the ejector rod assembly attached to the barrel lug, loading gate on the ...

Produced in 1855. Pin and notch sights, with "COLT'S PT. / 1855" followed by "ADDRESS COL. COLT / HARTFORD CT U.S.A." with ...

Manufactured in 1861, this revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the fluted cylinder. These revolvers a

Manufactured in 1863. Three screw frame cut for a shoulder stock. Silver blade sight on a barrel marked "-- ADDRESS COL. SAML COLT NEW-YORK U. ...

Manufactured in 1861. Standard Hartford barrel address, "COLTS / PATENT" on left side of frame, the number "2" on left side of ...

Manufactured in 1863. Three screw frame cut for a shoulder stock. Silver blade sight on a barrel marked "-- ADDRESS COL. SAML COLT NEW-YORK U. ...

Made early in the Civil War, possibly for militia. The top of the barrel has the standard one line New York address, "COLTS / PATENT" on t...

Manufactured in 1864. Standard New York, U.S. America barrel address, "COLTS / PATENT" on left side of frame, and the Texas Navy scene on ...

Manufactured in 1856, this particular Colt Model 1849 revolver has a three-inch octagon barrel with no provision for a loading lever and small round t

Manufactured in 1851. The top barrel flat has the standard one line New York address with a dash at each end and the left side of the frame is stamped

Manufactured in 1854. Standard two line New York barrel address, "COLTS / PATENT" on the frame, the number "3" on the left side ...

Manufactured in 1862, with a 3 screw frame cut for a shoulder stock. The top of the barrel has the one line "- ADDRESS COL. SAM'L COLT NEW-...

Manufactured early in the first year of production, 1861, with the top of the barrel marked "ADDRESS SAML COLT HARTFORD CT", the left side...