Rock Island - Premiere Collector's Firearms Auction

Manufactured in 1959. This rifle features a varmint barrel drilled and tapped for a front sight and the barrel and receiver are fitted with scope bloc

Introduced in late 1935 with a 26 inch extra heavy barrel fitted with a globe front sight. Scope blocks on the barrel and receiver and a receiver sigh

This rifle was manufactured in 1941 and has three scope/sight blocks on the barrel, a Lyman base on the receiver, and a trigger shoe. Mounted on a Mar

Manufactured in 1960. Standard Winchester markings including the factory proof on the left side of the heavy barrel and receiver at the breech. Scope

Manufactured in 1957 this is one of 683 Model 70 Target Rifles manufactured in the 243 Winchester caliber. The heavy barrel is tapped for front and re

Manufactured in 1939 with 1,800 produced in this caliber. The barrel is tapped for front and rear sight mounting with the Winchester legend including

Manufactured in 1953. Standard markings including the factory proof on the left side of the barrel and receiver at the breech. Equipped with an Unertl

Manufactured in 1955 with a hooded ramp front and folding leaf rear sights. This rifle has a Bausch and Lomb scope mount and Balvar 8A 2.5-8X scope. M

Manufactured from 1947 to 1961. Standard markings including the factory proof on the left side of the barrel and receiver at the breech. Scope/sight b

Manufactured 1978. Standard Winchester markings with a factory proof and custom shop ("C/CS") proof on top of the heavy barrel. Jeweled fo...

Standard Winchester markings with a factory proof on top of the barrel at the breech and "SUPER EXPRESS" on the floor plate. Hooded ramp f...

Manufactured in 1966. Varmint barrel tapped for front and rear sight mounting and scope blocks mounted on the receiver. Jeweled bolt and high comb pis

Produced 1990-2006. Barrel manufactured without sights, right of the barrel marked "CLASSIC SUPER GRADE", and scope rings attached to the ...

The heavy barrel is tapped for scope/sight mounting. Equipped with a Lyman All-American 10x scope. Jeweled follower and post-64 bolt. Checkered pistol

The barrel is tapped for sight mounting. Equipped with a Tasco 6-18X40 scope with Weaver mounts. Jeweled post-64 bolt and checkered pistol grip stock

Manufactured in Japan, this shotgun features two ivory beads on the matte vent rib, chambered 2 1/2 and 3 inch, choked full/modified with ejectors. Th

Manufactured in 1941. Red front and steel mid bead sights, with "WS1"/"WS2" marked chokes, ejectors and 2 3/4 inch chambers. The...

This model 42 shotgun has a Simmons Gun Specialties vent rib, a single red bead sight, choked "SKEET" and a 3 inch chamber. The Winchester...

Ivory bead front and steel mid-bead sights on the matte vent rib, chambered for 2 3/4 inch shells and full choke. The receiver is engraved with a roun

This was the first slide action shotgun Winchester ever developed exclusively for the .410 bore. This shotgun was manufactured in 1952. Angelo Bee was

Dual white bead sights, with wedges of punch-dot backed scroll engraving at the muzzle and breech, a gold band at the muzzle, 2 3/4 inch chamber and a

Manufactured in 1935 this fine model 21 shotgun features a single nickel bead sight, improved modified/cylinder chokes, ejectors and 2 3/4 inch chambe

Manufactured between 1914 and 1963. Dual ivory bead sights atop matte vent rib barrel with 2 3/4 inch chamber choked marked full. Receiver is blue

Manufactured in 1947. Single bead sight, 2 3/4 inch chamber and choked full. Standard barrel markings with the factory proof on top of the barrel and

Manufactured in 1947. Single bead front sight, 3 inch chamber choked full with standard markings including the factory proof on top of the barrel and

Manufactured in 1906. Single bead sight and choked full, with the top of the barrel having the two line address followed "MODEL 1901. 10 GA&quo...

Manufactured in Belgium, in 1970. The action is engraved with a relief floral vine design with three gold ducks in flight in a marsh scene on the righ

Ramp bead and folding adjustable notch sights, with the address marking on the left side and caliber on the right. Scroll engraved frame, with a gold

Manufactured in 1987. This 3 barrel set consists of a 20, 28, and 410 gauge barrels. All measure 28 inches in length with dual ivory bead sights, skee

Manufactured in Belgium in 1969. This Diana Grade shotgun features dual bead sights on the matte vent rib, chambered for 2 3/4 inch shells, screw-in c

This is 1 of a limited edition of 500 shotguns commemorating the making of the one millionth Citori shotgun in 2008. These shotguns were serial number

Manufactured in 1973 with 32 inch barrels, a single white bead sight, choked full/extra full, with automatic ejectors, chambers are unmarked and measu

Manufactured in Japan with dual ivory bead sights on the high matte vent rib, 3 inch chambers with ejectors and Invector Plus choke system. The barrel

Introduced in 2000 and Manufactured in Japan. Single ivory bead sight on the matte vent rib, chambered for 2 3/4 and 3 inch shells, with ejectors and

Manufactured in 1992 with standard features and markings. Mounted on a matte black, checkered synthetic forearm and pistol grip stock with solid rubbe

Manufactured in Japan. Single bead sight on a matte vent rib, 3 inch chambers and Invector Plus choke system with ejectors. Receiver is blue with flor

Manufactured in Japan with single bead sight on a matte vent rib, 2 3/4 inch chambers and Invector Plus choke system. Standard markings on barrel with

Manufactured in Belgium. Hi-Viz sight on a matte vent rib with adjustable comb. 3 inch chambers with Invector Plus choke tube system. Receiver contain

Manufactured in Japan. Single bead sight on the matte vent rib, 3 inch chambers with ejectors and Invector Plus choke system. Standard Grade IV scroll

Manufactured in Japan with ivory front and mid bead sights on a matte vent rib. 3 inch chambers with Invector Plus choke system, tang mounted safety a

Manufactured in Japan. Dual ivory sights on top of a matte vent rib, with Invector Plus choke tube system, and 3 inch chambers. The receiver has an e

Introduced in 1999. Features a Hi-Viz front sight, stainless steel mid bead sight, 3 inch chamber, and screw-in choke. Mounted on a ribbed synthetic f

Manufactured in Japan. Single bead sight on a vent rib with a 3 inch chamber and Invector Plus choke system. Standard Grade I engraving and mounted wi

Introduced in 1993 and manufactured in Japan. Dual ivory bead sights on a matte high vent rib, chambered for 2 3/4 inch target loads and Invector Chok

Manufactured in Japan. Single bead sight on matte vent rib, 3 inch chambers with extractors, gold washed trigger and tang safety. Receiver, forearm re

One of 100 manufactured in Japan. Single brass bead sight on matted vent rib, 3 inch chambers, Invector chokes, extractors, gold washed trigger and t

Manufactured in Italy. Single ivory bead on the vent rib, chambered for 2 3/4 inch shells with screw in chokes and ejectors. Single selective gold tri

Manufactured in Belgium and assembled in Portugal. Single bead sight on the matte vent rib, 3 inch chamber with Invector choke system. Receiver is fin

Manufactured in Portugal by FN Herstal. Single ivory bead sight on the matte vent rib barrel with 2 3/4 inch chamber. Receiver has bright gold filled

The Premier grade was exclusively the product of the Remington Custom Shop, with masterfully hand-fitted components and superb embellishment. A produc

The Premier, or F, grade was exclusively the product of the Remington Custom Shop, with masterfully hand-fitted components and superb embellishment. W

Produced in 1966, the Premier, or F, grade was exclusively the product of the Remington Custom Shop, with masterfully hand-fitted components and super

Manufactured from 1960 to 1980. This rifle features floral scroll engraving on the frame with scallop and decorative bordering. The top of the barrel

This American Historical Foundation commemorative Renato Gamba shotgun is a limited edition of only 200 pieces and commemorates the French Revolutiona

This shotgun was manufactured in 1997. The barrel has a single steel bead sight, is threaded for Invector choke tubes and has 2 3/4 inch chambers with

The first production of the 357 Magnum double action revolver built on a five screw N target frame. These .357 Magnums were introduced in 1935 and was

Manufactured in 1931. This five screw model is built on the .38 Hand Ejector square-butt K frame. The barrel has a standard two line marking ending wi

Manufactured between 1958 and 1959 with Patridge front and adjustable rear sights. Fitted with checkered walnut grips with S&W medallions. With ...

Manufactured in 1908, this is an original unaltered Smith and Wesson First Model 44 Hand Ejector with the very desirable "Triple Lock" mec...

Manufactured in 1933, this revolver is built on the 44 Hand Ejector Third Model frame. The top of the barrel is marked with the two line address/paten

This is a fabulous and very beautiful example of a factory engraved Pre-Model 27 revolver, which features “Class A” floral scroll and punch dot backg

Manufactured in 1931, this five screw model is built on the .38 Hand Ejector square-butt K frame. The pinned replacement barrel has a standard two lin

Manufactured circa 1977-78, this revolver has been nicely custom engraved by Marty Rabeno. Rabeno is a founding charter member of the Firearms Engrave

Produced in limited numbers from 1924 to 1936 this is one of approximately 957 manufactured in .32 caliber. Fixed front sight and notch rear sight. Tw

Spanish copy of a Smith & Wesson 44 this revolver features a half moon front and rear notch sights. Barrel marked "P. ARANZABAL - EIBAR (E...

The barrel is pinned with a fixed Patridge style front and adjustable rear sight and has two line address/patent ending with the 1914 patent marked on

Manufactured in 1929, this is an excellent example of one of only 506 Single Action Army revolvers manufactured in the .44 S&W Special Cartridge...

This is an excellent example of a 1938 manufactured Colt Single Action Army Revolver. The barrel is roll-stamped with the second style .44-40 marking

Manufactured in 1959, this is a truly excellent example of an early Second Generation Single Action Army. Barrel contains one line address, the left s

Manufactured in 1959, this is an excellent example of an early Second Generation Single Action Army. One line address on top of the barrel, the left s

Colt Single Action Army revolver manufactured in 1960. The revolver is complete with a Colt factory letter that states it was shipped to H. Cook Sport

Manufactured in 1973. Note that the caliber marking on this revolver is on the right side of the barrel above the ejector housing ("COLT SINGLE...

Manufactured in 1960. The top of the barrel is marked with the one line Hartford address, "COLT SINGLE ACTION ARMY 38 SPECIAL" on the lef...

Manufactured in 1959, this very desirable revolver features a blade front and rear notch sights. Barrel is marked with the single line Hartford addres

Manufactured in 1956, the introductory year for the Second Generation Single Action Army. Fixed blade front sight with single line address on top of b

This exceptional example of a 2nd Generation Single Action Army Revolver was manufactured in 1960. The barrel has the one line Hartford address stampe

Manufactured in 1960. The top of the barrel is marked with the one line address, the left side is marked "COLT SINGLE ACTION ARMY .357 MAGNUM&q...

Manufactured in 1957, the first year of manufacture of the Buntline Special revolver. Colt manufactured approximately 3,900 of these Buntline Specials

Manufactured in 1961, the 125th Anniversary of Colt's Patent Firearms Co., this excellent Second Generation Single Action Army revolver features...

Manufactured in 1959, this is an early Second Generation Single Action Army in nickel finish. One line address on top of the barrel, the left side mar

Manufactured in 1979 and beautifully engraved and gold inlaid by Colt Master Engraver Leonard Francolini. The revolver features factory Class B floral

Manufactured in 1963. The revolver features factory class "A" scroll engraving with the engraver Alvin White signature, "A.A.W."...

Manufactured in 1963. The revolver features factory Class "B" scroll engraving with Alvin A. White signature, A.A.W., on the right side of...

U.S. Bicentennial issue with standard Colt Bicentennial markings and features including the original 13 colonies stamped on the cylinder and the Great

Manufactured in 1891 and subsequently engraved and gold inlaid by Master Engraved Alvin White. The revolver features floral scroll and matte backgroun

Manufactured in 1894 and subsequently very nicely custom engraved. The revolver has floral scroll engraving, with a punch dot background on the barre

This unique and masterfully engraved and gold inlaid revolver is finished in Colt Royal blue with a gold plated cylinder pin, trigger guard and back s

Manufactured in 1984. The revolver features factory Class "B" floral scroll and punch dot engraving on the barrel, ejector rod housing, fr...

This revolver is a Colt engraving Sampler Single Action Army revolver. The revolver features Class "B" "Contemporary" floral scr...

Manufactured in 1940. Also known as the "Bullseye Match Target", the top of the barrel is marked with the two line address/patent informat...

Manufactured in 1929. The top of the barrel is marked with the two line address/1903 and 1918 patent dates, the left side of the frame is marked &qu...

Manufactured in 1947, this is an example of one of a few thousand guns that was assembled from leftover pre-war parts. These guns were often a mix of

The Pre-Woodsman Model was manufactured from 1915 to 1927 and prior to the "Woodsman" name. This particular pistol was manufactured in 192...

Manufactured circa 1986. The frame and slide have the standard markings. Fitted with a ramped Patridge front and Elliason rear sight, and checkered th

Manufactured in 1930. The top of the barrel is marked with the two line address/1903 and 1918 patent dates, standard frame and slide markings and the

Manufactured in 1969. Standard markings, blade front with adjustable rear target sights and fitted with checkered grips with right hand thumb rest. Co

The Pre-Woodsman Model was manufactured from 1915 to 1927 and prior to the "Woodsman" name. This particular pistol was manufactured in 192...

Manufactured in 1940. The left side of the barrel is marked with the two line address/1903 and 1918 patent dates, standard frame and slide markings an

Originally manufactured in 1973. This pistol has a frame configuration inspired by the Government Model. The frame has been milled ahead of the trigge

This prototype pistol was manufactured for Colt by Norinco, China. The pistol features an unusual profile, which includes a large trigger guard and tr