Premiere Collector's Firearms Auction

The cylinder is unfluted and has a capacity of six rounds chambered in 11 mm Perrin. The right front of the frame is marked "PERRIN / & Cie...

A) No maker markings with British proofs on the barrel and between the numbered cylinder chambers. Has a hammer safety and two- piece checkered grips.

A) Crown/crown/U late 19th Century proofs on the cylinder, and frame with two crowns stamped on the bottom barrel flat. There are no maker markings. F

A) This Colt 2nd Model 1848 Dragoon Revolver was manufactured in 1850. This revolver is one of a lot of three pistols that reportedly were purchased b

Manufactured in 1853, this Model 1851 Navy revolver features factory floral scroll, Gustave Young Shop engraving covering the sides of the barrel lug,

Manufactured in 1861, the second year of production. This revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the fl

Manufactured in 1866. The top of the barrel has the one line New York U.S. America address, "COLTS / PATENT" on the left side of the frame...

Manufactured in 1857. Cone front and groove rear sights, with the two line, two block barrel markings with Maltese crosses and pointing hand on the to

Manufactured in 1863. One line New York U.S. America barrel address, "COLTS / PATENT" on the left side of the frame, and "36 CAL"...

Manufactured in 1861, the first year of production. One line New York barrel address, "COLTS / PATENT" on the left side of the frame, stag...

A) Colt manufactured these London revolvers between 1853 and 1857. This particular revolver was manufactured in 1856 and has the large round iron trig

This is an outstanding example of a Colt Model 1855 revolving carbine. Also known as the Model 1855, which quickly became known as the "Root&qu...

Manufactured in 1867 with a three screw frame, brass blade sight on a barrel marked "-- ADDRESS COL. SAML COLT NEW-YORK U. S. AMERICA --"....

Manufactured in 1872 this pocket revolver was factory chambered for the .38 centerfire cartridge using left over Model 1862 Police Percussion parts. S

Manufactured in 1862 for the U.S. Government under contract by Colt. Four screw frame cut for a shoulder stock, marked "COLTS / PATENT" on...

This is a nice representative example of a scarce U.S. Colt First Model Dragoon Revolver that was manufactured in 1849. The revolver has the distincti

A) The frame is machined at the recoil shield and is fitted with a conversion plate that is notched for the centerfire firing pin and features a loadi

This is an example of a Colt factory engraved, Model 1851 Navy Revolver that was manufactured just prior to the Civil War in 1860. This early Fourth M

Made by H. Keller of Corpus Christi, Texas circa 1878-88 and is designed for a 7 1/2" barreled single actioned revolver. Reminiscent of the &qu...

This is a beautiful example of a deluxe engraved 1849 Pocket Revolver as manufactured in 1854 with the scarce 5 inch barrel length. Although not speci

Also known as the Second Type Richards Conversion of the Model 1860 Army revolver, this conversion is done without the rear sight on the breech plate,

Manufactured in 1859. The top barrel flat is marked with the pointing finger, "COLT'S PT. / 1855" flanked by Maltese crosses and "...

This is an example of a Two-Digit number (52) Colt Revolving Shotgun that was manufactured in 1860. Data from R.L. Wilson's "The Book of Co...

This is an example of a scarce Colt 1855 Revolving Carbine manufactured from 1856 to 1864 with a total production of only about 4,400. The top strap i

Manufactured 1856-1864. Part of a line of revolver-type long arms which enjoyed some success, but in many ways was ahead of its time. The top strap is

This is a 3rd Model 1851 "Army-Navy" revolver in the 42000-80000 serial number range which were purchased by the U.S. Army prior to the Ci...

A) Manufactured in 1864. One line New York barrel address, "COLTS / PATENT" on left side of frame, "31 CAL" and "3" on...

Manufactured in 1958. The top barrel flat is marked "{ ADDRESS SAML COLT / NEW YORK CITY}", the left side of the frame is marked "COL...

Manufactured in 1849. The top barrel flat has the two line New York address flanked by dashes, "COLTS / PATENT" is stamped on the left sid...

Made for a Colt percussion revolver, this Main & Winchester Slim Jim Holster features an open top and open toe and is made for the left side of ...

This Third Model 1851 was manufactured in 1856. First type barrel marking ("--ADDRESS SAML COLT NEW YORK CITY--"), "COLTS / PATENT&qu...

A) Manufactured in 1853. Two line Hartford barrel address inside brackets, "COLTS / PATENT" on left side of frame, and stagecoach holdup c...

Factory converted Colt Model 1861 percussion revolver to be used with rimfire cartridges made, in most cases, using new parts. Loading lever removed a

Manufactured in 1862. Three screw frame cut for a shoulder stock marked "COLTS / PATENT" on the left side. The barrel has the one line New...

A) Manufactered in 1860. Two line Hartford barrel address, COLTS / PATENT" on left side of frame, "M" on left trigger guard shoulder,...

The top barrel flat is marked "COLT / BREVETE" with a crown/letter proof on the left side of lug and the serial number on the underside of...

A) Manufactured circa 1859-68. This revolver is a Series V with the six shot cylinder with the standard engraved oval panels and marked with the 1859

A) Second Model manufactured from 1864 to 1869 while the company was located in Philadelphia. Three line address/patent dates (1851-1863) marking on t

A) Produced mainly in Belgium, the term "Brevete" can be applied to any revolver made under license by Colt using one or more of their pat...

Manufactured in 1885. The top of the barrel is marked with the two line Hartford address. There is no visible caliber marking. Serial number on butt w

Manufactured in 1880 with the rare 4 inch barrel. Fixed and notched sights with the top of the barrel stamped with the two line Hartford address and e

Manufactured in 1872. Two line "COLT HOUSE PISTOL" marking flanked by Maltese crosses on top of the barrel, with matching numbers on barre...

Manufactured in 1876. The top of the barrel has the two line Hartford address, patent marking on the barrel underside, and etched "COLT NEW 41&...

Manufactured in 1876. Top of barrel has the two line Hartford address along with a factory engraved dot and line pattern and the right side of the bar

Second Model, produced in 1877. Nickel finish with bird head grips. Standard two line Hartford barrel address, etched "COLT NEW 38" on the...

A) Manufactured in 1875. Features short flutes with locking notches behind the flutes. Two line Hartford address on top of the barrel flanked by Malte

Manufactured circa 1875-1912, this derringer has a custom engraving. Top of barrel marked "-COLT-" in large italicized letter and serial n...

Manufactured form 1870 to 1890. Standard two line Hartford barrel address flanked by Maltese crosses with "No. 1" at the breech. Matching ...

Manufactured in 1871, the first year of production, with an integral ejector. The top of the barrel has the two line Hartford address flanked by Malte

Manufactured in 1880. Features long cylinder flutes with locking slots on the back. Two line Hartford address on top of the barrel, etched "COL...