Premiere Firearms Auction

According to information from the January, 2007 issue (#110) of "U.S. Martial Arms Collector & Springfield Research Newsletter", in wh...

Manufactured in 1941, this scarce Colt Woodsman Target pistol was acquired by the U.S. Navy and is one of an estimated total of 3,962 pistols purchase

According to the included factory letter, this pistol was one of 750 shipped to the Commanding Officer of Springfield Armory on September 6, 1913. Fix

Produced in 1943. Fixed sights, with the two line, two block address/patent marking with the Rampant Colt in the center on the left side of the slide,

Introduced in 1943, with approximately 44,000 produced for the U.S. government. Featuring a target weight barrel with blade front sight, fixed notch r

Produced by Colt in 1941. The left side of the matching numbered slide is marked with the two line, two block address/patent marking with the Rampant

This is an example of the desirable Colt "Transitional" Model 1911 Pistols manufactured and delivered to the Army in 1924. The "Trans...

This is an example of late WWI Model 1911 pistol as manufactured by Colt in 1918. The pistol is one of the often called "Black Army" pisto...

Produced in 1918, and later arsenal overhauled and has a gray parkerized finish. Fixed sights, with the two line Colt patent dates, Rampant Colt and t

Blade front and notch rear sights, with the left side of the slide marked "REMINGTON RAND INC./ SYRACUSE, NEW YORK" in the early style. Th...

Manufactured in 1905. Partridge front sight and rear sight. The top of the barrel has the standard two line address/patent dates (1884, 1900), with ...

The top of the barrel is marked with the two line Hartford address/patent dates (1884-1895) marking with "COLT D.A. 38" on the left side a...

Cased U.S. Army calibration system (missing tools), 24" barrel, Springfield Martini International forearm, cased stamping die set with case mar...

The top of the barrel is marked with the two line Hartford address/patent dates (1884-1895) marking with "COLT D.A. 38" on the left side a...

This is a regulation issue pistol that was produced by Smith and Wesson for the Army and was given to British under the Lend Lease Act. The barrel is

Discontinued in 1945 with fixed sights, barrel marked "SMITH & WESSON" on the left side and "38 S.&W. Special Ctg" on th...

This is an excellent example of a desirable Johnson semi-automatic rifle. These rifles were developed in the late 1930s intending to compete against t

Originally produced in May 1945 according to the serial number, this rifle was subsequently converted to a M1D sniper rifle. The breech end of the bar

Features a Redfield Olympic globe front sight with an adjustable Redfield Palma receiver rear sight. Scope blocks mounted on heavy barrel with standar

We thought we had seen the best T-3 Carbine ever in the last auction, and then an astute collector consigned this example of a fantastic WWII Winchest

This is an excellent example of a trench shotgun as used by the US Army and U.S.M.C. These takedown variations also were used in Korea and Vietnam. Th

This is an exceptional like new late production "Tool Room" M1 carbine, as manufactured by the Inland Mfg Div of General Motors. This is a...

Sights properly removed from the "3-43" dated Remington barrel. Standard receiver markings, with the curved "R" marked bolt, a R...

Made in January of 1942, this rifle was among the supplies and war material loaned to Great Britain as part of the Lend-Lease program in the 1940s. Bl

Designed by Smith & Wesson for military trials, the Mark I Light Rifle was passed over for the M1 Carbine. Due to the low production, and the de...

Blade front and two-leaf rear sights with Winchester barrel and receiver, Type I barrel band, flat blued bolt, pushbutton safety and a "W"...

Produced in December of 1944 as an original M1C, and overhauled during or after the Korean War. Blade and peep sights, with locking bar and "BA...

These were the standard commercial Winchester Model 1200 shotguns produced during the late 1960s and early 1970s that were purchased/adapted for the m

Blade and folding ladder sights, with an Avis Manufacturing barrel dated "10-18" and standard markings on the receiver. Smooth straight gr...

This is a very nice example of an original WWII tool room or preproduction M1 carbine as manufactured by the International Business Machine company. I

Blade front and adjustable 1000 meter rear sight, with an unmarked barrel flange, five line model and five line patent markings on top of the receiver

Made in November 1943. Blade front and adjustable rear sights with "BATTLE RANGE" drum and locking bar. Springfield barrel marked "SA...

Blade front (with detachable hood) and folding ladder rear sights with a Remington barrel marked with an ordnance bomb over "6-2". Smooth ...

Produced between 1944 and 1946, the Reising Carbine was designed with law enforcement in mind. Drift adjustable blade front and elevation peep rear si

Sights properly removed, with the Remington barrel dated "1-43", and the forearm uncut for a rear sight. Standard receiver markings, with ...

The left side of the barrel has the one line Ithaca address/patent/model marking over "12 GA.-2 3/4 CHAMBER", with the proper cylinder cho...

Produced in June of 1942, and most likely shipped to the British as part of the Lend-Lease program. Blade and adjustable peep sights, with "BAT...

Blade front and adjustable ladder rear sights, with a Springfield barrel dated "11-09". Smooth straight grip stock with a boxed "J.S....

The serial number for this shotgun falls into the serial number range of South Vietnamese contract Model 37 riot shotguns (50,000-71,999). However, th

This is an example of a Model 1941 Johnson Automatic Rifle that was manufactured by Cranston Arms Company. These rifles were developed in the late 193

This is an example of a mid-war Remington 03-A3 rifle manufactured in 1943. The top of the receiver ring is marked "U.S. / REMINGTON ' MODE...

Produced in May of 1942, this rifle was leased to Denmark following World War II, and later returned to the United States. Blade and adjustable peep s

Blade front and adjustable aperture rear sights, with a "3-43" dated Smith-Corona barrel and standard receiver markings. Smooth straight g...

Produced circa 1941-1942, the Model 720 rifle was used by the military as a trophy item for shooting competitions. Ramp bead front and semi-buckhorn s

Late WWII production, with blade front sight with the correct stamped "H in shield" adjustable rear sight on the side with the original W...

Blade front and two-leaf folding rear sight, with "10-42" dated Inland barrel, "UI" Type I barrel band, round bolt, milled guard...

Very early production, pre-ban rifle. Made in Geneseo, IL. Blade front and adjustable peep rear sight with locking bar and "BATTLE RANGE" ...

Produced post-World War II in Italy for Denmark, supplementing the M1 Garands received from the United States. Blade front and adjustable peep sights,

Standard Remington receiver markings with a Remington barrel dated "7-42". Replacement Lyman globe front sight, with a ladder rear sight. ...

This rifle originally was a 30-03 model that was modified to the 30-06 caliber somewhere between 1906-09. Blade front and adjustable ladder rear sight

Produced for Golden State Arms, Santa Fe Division, using GI parts. Blade front and peep rear sights, with "SA" windage drum. The top and l...

Blade and adjustable peep sights, with an unmarked barrel, "JM" Type III band, round bolt, "EW" button safety, "CC/M" ...

Manufactured from 1981-1986, with detached globe front sight and attached Redfield Palma rear sights, with two mounting blocks on the barrel at the br

Six Model 1905 bayonets with scabbards for the Model 1903 rifle. 1-3) Bayonets with leather covered scabbards. Blade markings are the following: RIA 1

Single bead sight on a round barrel, one line address/patent/model marking over "12 GA.-2 3/4 CHAMBER" marked on the left side of the barr...

Post-War production. Standard sights, with a "DRC" windage drum, Springfield "4-55" barrel, Springfield bolt, hammer, safety, tr...

Scarce 1903 Springfiled action that was assembled by the Sedgely company using new commercial parts and GI parts these were sold in the 1930's t...

These were the standard commercial Winchester Model 1200 shotguns produced during the late 1960s and mid early 1970s that were purchased/adapted for t

Standard Springfield receiver markings, with the barrel marked "U.S.M.C. / 4-42" over a circled "S", indicating that this Model ...

Standard factory markings with "UNITED STATES / PROPERTY" over the serial number marked on the receiver ring. The bolt has been drilled an...

Standard markings and features, with the addition of a gold washed finish on the hammer, trigger and frame screws, engraved and gold etched feather de

Fixed sights, with the two line address on top of the barrel, "COLT SHERIFFS MODEL" on the left and "COLT S.A.A .44 CAL." on the...

Produced after 1978. Fixed sights, with standard markings on the barrel and frame, matching numbers and Rampant Colt/ American eagle grips. BBL: 7 1

Standard markings with an all nickel finish and smooth walnut grips with Colt medallions. Grips are numbered to the gun and grip frame numbers match.

Manufactured in 1978. Standard barrel and frame markings, with casehardened frame, polished hammer sides and blue remaining parts. Fitted with checker

Standard markings, blade and frame notch sights and checkered Rampant Colt/American Eagle relief grips. Matching numbers on the frame, front and backs

26 of 250 produced with standard markings and features with floral scroll etching and 24k gold highlights and "No. 26" on the butt. With C...

Standard markings, with smooth walnut grips featuring Colt medallions. Matching numbers on the frame, front and back straps and both grips. With Colt

Standard one line address on top of the barrel, left side marked "COLT SINGLE ACTION ARMY .45", two line, three patent dates on the left s...

Standard markings and features with checkered double diamond fancy hardwood grips. Surface is polished on the flats and matte on the contours. With a

Manufactured in 1964, this is one of only 1,004 Pony Express Presentation Model revolvers made. The left side of the barrel is marked "-RUSSELL...

Standard markings and features of the Colonel Samuel Colt Sesquicentennial Single Action Army. Complete with case, a wooden ammunition block with twel

Introduced in 1946 with four screw frame, correct blued ramp front and adjustable rear sights. Standard barrel and frame markings with casehardened ha

Standard markings and features of the Nevada Centennial Commemorative. Complete with a wood display case with brass hardware and blue velvet interior.

The left side of the barrel is marked "1860-61 RUSSELL, MAJORS AND WADDELL / PONY EXPRESS CENTENNIAL MODEL 1960-61", the top with the one ...

Produced in 1970, as one of only 500 revolver limited edition. Fixed blade front sight on the barrel and folding ladder rear sight on the flattop fram

Standard for the 125th Anniversary Commemorative Model. Complete in red velvet lined, French fitted, hardwood presentation case with branded Colt logo

Standard markings and features of a Nevada Centennial Commemorative Single Action Army revolver. Complete with two-piece pearl grips, extra .45 cylind

Standard markings and features of the USS Monitor and USS Virginia commemorative percussion revolver. Complete in wood case with glass hinged lid. The

Standard "UNITED STATES CAVALRY COMMEMORATIVE" markings with blue barrel and cylinder, casehardened frame and loading lever, and brass tri...

German silver blade front and notch rear sights, with ''DERINGER / PHILADELA'' and "P" marked on the gold banded breech. T...

Produced in 1982. Only 50 Colt Single Action Army Revolvers were produced in this configuration, with a unique and highly attractive two tone cylinder

Produced in 1982, 1 of only 484 produced in this configuration. Standard markings, with casehardened frame, distinctive nickel finished cylinder and t

Fixed sights, with the standard short two line address, model and caliber markings on the barrel. Two line, three date patent markings on the left sid

Fixed sights, standard markings and black checkered Rampant Colt/Federal Eagle relief grips. Complete with Colt "wood grain" box numbered ...

Produced circa 1980. Fixed sights, with the one line address and caliber markings on the barrel, two line patent markings on the frame next to the Ram

Standard markings with checkered Rampant Colt/Federal Eagle relief grips and casehardened frame and polished hammer sides with the remaining parts blu

Fixed ramp front sight with adjustable rear sight. Flattop frame is casehardened while all other metal surfaces are blue finished. Standard one line a

Fixed sights, with the standard one line barrel address on top, "COLT SINGLE ACTION ARMY .44-40" on the left, and two line, three date pat...

This is 1 of 1000 Exhibition of 1851 Presentation Dragoon revolvers with standard markings and features with standard presentation case and accessorie

One of 21 produced, standard 175th anniversary markings and features, with gold inlays including "12/21" on the underside of the frame. Th...

Standard markings and features of the Robert E. Lee commemorative. With commemorative case holding "B" of this lot and accessories. BBL:...

Standard markings and features floral scroll engraving on the frame and rear side barrel flats. Complete with original fitted hardwood case with acces

Manufactured 1978 to 1982. Standard markings and features with black box numbered to the gun and papers. Complete with wooden case, original box numbe

Manufactured in 1981. Standard markings and features. Complete with original box numbered to the gun. BBL: 4 inch octagon Stock: Gauge: 31 Fi

Manufactured in 1980. The revolver features standard markings, blue barrel and cylinder, with the frame and loading lever casehardened. The cylinder i

Standard markings and features with commemorative locking leather display case. BBL: 7 1/2 inch round Stock: Gauge: 44-40 Finish: nickel Gr

Made in 1968. Standard markings and features for the Pat Garrett Commemorative. In a gold felt lined commemorative case. BBL: 5 1/2 inch round Sto

Standard markings and features. In presentation case with a solid silver Texas Ranger badge (made from a five-peso Mexican coin) in a block of lucite

Standard markings and features. In a Colt wooden case with second Colt West Virginia Centennial Commemorative Scout Revolver. The two revolvers in thi