Premiere Firearms Auction

Manufactured in 1855. Standard two line New York barrel address, "COLTS / PATENT" on the left side of the frame, "5" on the left...

Manufactured in 1863. The top of the barrel has the standard one line New York address, "COLTS / PATENT" on the left side of the frame, an...

This is an example of a desirable Model 1851 Navy-Army contract revolver that was purchased by the U.S. Army prior to the Civil War. These U.S. Model

Manufactured in 1853, this particular Colt Model 1849 revolver has a three-inch octagon barrel with no provision for a loading lever and small round t

Manufactured in 1862, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, "COLTS / PATENT&q...

This restored Colt Model 1860 Army percussion revolver case measures 15" x 6 5/8" x 2 1/8". Key is absent. The inside of the case is ...

Manufactured in 1860. The revolver has the standard two line New York address in brackets on the top barrel flat, "COLTS / PATENT" on the ...

Four powder flasks that feature the same eagle and shield design: two rows of stars, eagle/shield, crossed revolvers and "E Pluribus Unum"...

Manufactured in 1856. Fitted with the scarce German silver blade front dovetailed onto the barrel with the standard hammer notch rear sight. The top b

The revolver has the distinctive breech plate with notch rear sight, a center firing pin and loading gate marked "3698". The blade front s...

Manufactured in 1862 for the U.S. Army, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, &quo...

This is a fine example of a late production Model 1849 revolver manufactured in 1863. The top barrel flat has the late one line New York address marki

Manufactured in 1862, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, "COLTS / PATENT&q...

Manufactured in 1862. The top of the barrel flat is marked with the two line Hartford address. The cylinder is roll-engraved with the Stagecoach holdu

Manufactured in 1862, with a 4 screw frame cut for a shoulder stock. The top of the barrel has the one line New York address, "COLTS / PATENT&q...

Manufactured in 1865. The top of the barrel has the standard one line New York address, "COLTS / PATENT" on the left side of the frame, an...

Manufactured in 1855, the first year of production. The serial number falls into the Model 2 serial number range. Brass post front and frame groove re

1) Sealed pack of six 44-100 inch caliber combustible envelope cartridges. 2) Pack of six 44-100 inch caliber combustible envelope cartridges. 3) Seal

A) Manufactured in 1856. Standard two line New York barrel address, "COLTS / PATENT" on the left side of frame, and stagecoach holdup scen...

This late production Colt Walker flask shows the dTcor of massed flags, mortar, field piece, drum, and crossed arms, with no star between the words Co

This rare flask was used with the Paterson carbine. The dTcor is that of massed flags, mortar, field piece, drum, and crossed arms, with "COLTS

This extraordinary Colt Second Model Derringer pistol was manufactured with a solid sterling silver frame and barrel. The left side of the barrel is s

Colt Open Top Pocket Model Revolver manufactured in 1874. The revolver is factory engraved with Germanic scroll-work on a punch-dot background and ha

Half-moon German silver front sight and hammer notch rear sight. The top of the barrel is marked "+COLT'S PT.F.A. MFG. Co./ HARTFORD. CT. U...

Standard Colt Third Model (Thuer) Deringer with blued barrel, silver-plated frame and mother-of-pearl, birds head grips. The frame is decorated with f

Manufactured in 1885, this was the final revolver in the New Line series. Fixed front sight on a barrel with the two line Hartford address on top and

Very early production Colt Cloverleaf House Model Revolver manufactured in 1871. The revolver has the rarely encountered factory engraved scroll work

A) This exceptional Colt Third Model or No 3 Derringer has an all nickel plated finish (including screws), with varnished walnut grips. The barrel has

Produced between 1875 and 1912, this deringer was embellished by Rudoph Kornbrath, master engraver, in the early 20th century. The frame is done in oa

Manufactured in 1871, the first year of production. Open frame revolver with round blade front and hammer notch rear sights. Two-line Colt Hartford a

Manufactured from 1870 to 1890, this Colt First Model .41 Derringer features German silver half-moon front and hammer notch rear sights. The top of t

Manufactured in 1876, this revolver falls into the serial number range of the Second Model and features the long cylinder flutes and locking slots on

Produced circa 1875-1912. German silver blade front sight on barrel marked "-COLT-", with London "crown/ GP" and "crown/ V&...

This rare short barreled Colt Cloverleaf House Model Revolver manufactured in 1871. The revolver has the scarce 1 and 1 /2 inch round barrel with half

Manufactured from 1870 to 1890. German silver half-moon front and hammer notch rear sights. Standard two line Hartford address and "NO1" m...

Manufactured between 1870 and 1890. German silver half-moon front sight and hammer notch rear sight. Standard two line Hartford barrel address follow

This is an extremely rare English oak London Agency case for a pair of Colt Number 1 Derringers. The lid is constructed with 8 brass screws with brass

Manufactured in 1884, this was the final revolver in the New Line series. Fixed front sight on a barrel with the two line Hartford address on top and

Manufactured between 1870 and 1890. This is a rare variation of the First Model Derringer with the top of the barrel marked with the Second Model stam

Manufactured in 1876, this revolver falls into the serial number range for the Second Model with long cylinder flutes and locking notches on the back

The "C/ Rampant Colt" marking was placed in response to inter-agencey hostility by the Colt London Agency following New York-based agents ...

Colt New Line .32 Caliber Revolver manufactured in 1874. The revolver had a full nickel-plated finish with two-piece mother-of-pearl, bird's hea...

Manufactured in 1876. Blade front sight and hammer notch rear sight, with the barrel having the two line Hartford address on top flanked by Maltese cr

Colt New Line .22 Revolver with nickel-plated finish, factory engraving, and two-piece, mother-of-pearl, bird's head grips. This revolver was ma...

Blade front sight and hammer notch rear sight, with the barrel having the two line Hartford address on top (without Maltese crosses) and the left side

Manufactured from 1871 to 1877, this Colt Open top Pocket revolver is engraved, with a nickel plated finish and "Tiffany" style silver pla...

The top of the blued barrel is marked "-COLT-" in italics and stamped with London proof marks on the underside. It is equipped with a Germ...

Manufactured in 1877, this revolver falls into the serial number range of the Second Model and features the long cylinder flutes and locking slots on

Manufactured between 1870 and 1890. German silver half-moon front sight and hammer notch rear sight. The top of the barrel is marked "COLT'...

Manufactured in 1873, the first year of production. The top of the barrel is marked "+COLT'S PT.F.A. MFG. Co. / HARTFORD, CT. U.S.A.+"...