The Premiere Firearms Auction of the Year.

Second pattern magazine with the stamped, folding winding lever. The top and bottom of the magazine is marked with the maker's code "B/N&qu...

Fixed sights, with a chamber date of "1918" and "crown / ERFURT" on the toggle. Three "crown/ gothic letter" proofs, &...

This is a nice example of the standard four inch barrel, German Luger pistol as used during WWI and WWII. It has the standard three "crown/scr...

Produced between 1924 and 1940. Blade and tangent sights, with the slotted rear backstrap for shoulder stock (absent). Standard slide markings, with t

A) Standard two line slide marking, with eagle/WaA77, eagle firing and eagle/623 proofs. The left side of the frame has an eagle/WaA77 proof. The slid

A) The left side of the slide has only the caliber marking (CAL. 7,65) and the right side is blank. Commercial eagle/N proofs appear on the frame, sli

A) The left side of the slide is marked "P. BERETTA-CAL. 7.65-BREVETTATA / GARDONE V.T. 1944" (correctly without the Italian Fascist date)...

A) The left side of the slide has only the caliber marking (CAL. 7,65) and the right side is blank. Commercial eagle/N proofs appear on the frame, sli

This is an example of a restored WWII German turret type sniper rifle manufactured by the Mauser factory that has been fitted with a Hensoldt sniper s

Produced following the fall of Czechoslovakia, based on the Czech Model 24 Rifle. Blade and tangent sights, with "eagle/ A80" proofs on th...

Produced in 1944 in Czechoslovakia by Waffenwerke Brunn. Hooded blade and tangent sights, with "dot/1" shield, "HG" and "ea...

Designed as a drop-in kit for the K98 rifle, only requiring the removal of the floor plate, magazine spring, follower and bolt. The barrel, receiver a

Hooded blade and tangent sights, with an "eagle/63" proof over the makers mark. Milled components, with "GERMANY" on the trigger...

Blade front and tangent rear sights, with "eagle/ 359" proofs on the barrel and receiver ring and "droop wing eagle/ 214" proofs...

This is an excellent example of a very late WWII production K98 rifle. This rifle was manufactured at the BRNO factory late in WWII while under contro

Blade and tangent sights, with caliber marking on barrel, "eagle/ N" on the barrel and receiver, and the maker and model markings on the r...

This is an example of a scarce pre WWII German K98 rifle that was manufactured by the Erfurt Arsenal. The top of the receiver ring is marked "S...

Fixed sights and smooth backstrap, two line markings on the left side of the slide, matching numbers on the barrel, slide and frame, with crossed penn

A) This is a nice example of a Walther Mod. PPK pistol with RZM marking on the left side of the slide between the factory logo and the serrations. Th

A) Late war production, made without the takedown catch. Fixed sights and standard slide markings, with "77" and "WaA625" proofs...

A) Manufactured circa 1943, this G prefixed serial numbered Model 1935 pistol has a slide without a legend, a common feature for Model 1935s in this s

The top of the receiver is marked with the large Persian Crest which depicts the Persian Crown at the top, a standing lion in the middle holding a Sci

An exceptional near mint example of a prewar Mauser contract rifle manufactured for the government of Argentina. Blade and tangent sights, with the Ar

Blade and tangent sights, with the Venezuelan crest on top of the receiver ring, Belgian proofs on the left side and the two line maker's mark/ ...

Beautiful all original, unaltered, near mint 1935 Brazilian Mauser, complete with matching bayonet. Receiver ring marked with Brazil crest with &quo...

Standard Argentine Model 1909 rifle with a very unusual rear sight. The rear sight leaf is unmarked except for a series of numbers (0-9) stamped aroun

Post WWII rework, hooded blade front and tangent rear sights, with the markings removed from the top of the receiver ring and the address and model ma

Fixed sights on a slide marked with maker/model/caliber markings on the left side and "Repr. J.V. ASTROM-BJURTJARN" on the right. Fitted w...

A) Fixed sights on a slide marked with maker/model/caliber markings on the left side. A boxed "Nds" is stamped on the left side of the fra...

A) Manufactured circa 1944. Except for the serial number, the slide is unmarked (a common feature with G prefixed serial numbered Model 1934 pistols).

A) The left side of the slide is marked "P. BERETTA-CAL.9 CORTO-Mo 1934-BREVETETTATO / GARDONE V.T. 1937 XVI". The left grip tang has the ...

Measuring 6 1/4" long from bowl to stem, 5" tall and 1 4/5" wide, the main section of the holder is constructed with a meerschaum bow...

"The French showed themselves to be worthy of victory, but the Russians showed themselves worthy of being invincible" -Napoleon Bonaparte....

Possibly one of only three ever cast as a model for the Rochester New York tribute to Abraham Lincoln by renown sculptor and personal friend of Lincol

Measuring 28 1/2 inches tall including the marble plinth, this bronze depicts a man on horseback, riding down a steep incline. Bronze construction, wi

1) The model is by P.J. Mene (French 1810-1871). Magnificent polychrommed bronze of a standing young fox looking attentive standing on grassy meadow t

1) Dwayne Scott (Am 20th C Fl) signed bronze of a singing cowboy riding a horse. This large bronze depicts the classic Hollywood movie image of a cowb

The 13" horn has a high domed turned wood base and a turned and threaded spout with a turned collar at the tip. The horn is fully engraved, app...

Measuring 6 1/2" long, 5" tall and 3 1/5" wide, with the bowl carved in the form of an partially overgrown pillar, flowers and vines ...

Measuring 8" long, 6 3/4" tall and 2 4/5" wide, made from a single piece of meerschaum, carved into the bust of a Prussian soldier, w...

Measuring in at 6 1/2" long, 6 3/4" tall and 3" wide, depicting a bugling caribou with a 2 1/2" wide 6 point rack. Natural meers...

'Get your kicks on Route 66', or whatever highway you choose to travel with this trip back into the good old days of automobile history. Thi...

Blade is 8 1/2" in length, with a faint simulated temper line and a silver finished textured copper throat. The hilt and sheath are both carved...

Both tusks are attractively colored, with three dimensional carved scenes cut clear into the center of the tusk. 1) Ivory tusk, 27 1/2 inch long, carv

1) Uncarved tusk, 22 1/4" long, 2" across at the base, with 9" long nerve cavity. 2) Carved tusk, 25 3/4" long, 1 1/2" wide...

Also known as a surveyor's compass, the circumfrentor was used both for measuring angles and, in conjunction with a measuring chain, plotting fi...

Measuring 19 1/2 inches when open, this very large razor was made for salesmen to demonstrate the overall form of Case's razors, including the c...

1) Ivory topped sword cane, 38" total length with brass tip, 1 1/10" thick hardwood shaft with carved dragon designs, and 3" long hor...

Founded in 1891, Mills Novelty Company of Chicago was a producer of slot machines up through the 1980s. The machine is 16" wide, 15 deep and 25...

Bound with mottled pattern covers and a leatherette spine with gold decoration and text "HARPER'S WEEKLY/ AND/ FRANK LESLIE'S". Me...

Metal safe measures 18" tall, 18" wide, and 32" long. The inside of the lid has a decal: "THE TRIUMPH SAFE & LOCK CO. / CONN...

1) Inscribed silver topped walking stick, 31 3/4" long, with a nickel finished brass tip, 4/5" thick black painted shaft, and a 2 1/2"...

A) This excellent example of a factory engraved Smith & Wesson K-38 Target Masterpiece revolver is accompanied with a factory letter from Smith ...

Manufactured between 1893 and 1905 with a total production of only 1,251. Raised bead front sight and windage adjustable notch rear, with the two line

Manufactured from 1905 to 1909, this is an early production Second Model. Approximately 4600 Second Models were manufactured. The top of the barrel ri

Produced in limited numbers from 1924 to 1936 it is one of approximately 957 manufactured. Fixed front sight and notch rear sight. Two line address on

Manufactured from 1913 to 1921with a total production of 8,350, this was Smith & Wesson's first attempt of a semi-automatic pistol. There ar...

Manufactured from 1913 to 1921 with a total production of 8,350, this was Smith & Wesson's first attempt of a semi-automatic pistol. There ...

Smith & Wesson produced only 1,870 of these pistols from 1925 to 1936. This pistol features a patridge front sight and adjustable rear sight on ...

This is a scarce factory engraved Marlin No. 32 Standard 1875 Pocket Revolver with standard nickel-plated finish and two-piece factory mother of pearl

A) This was the first Smith & Wesson top break, automatic ejecting revolver made in 32 centerfire cartridge and was manufactured between 1878 an...

This model was manufactured between 1861 and 1874, this revolver was very successful commercially. Many of these were used as personal side arms by Ci

A) Manufactured from 1860 to 1868, this Model 1, 2nd Issue revolver features a blade front and notch rear sights, 7 round un-fluted cylinder, square f

Commonly referred to as the New Model or 2nd Issue 1 1/2 and manufactured between 1868 to 1875. This revolver features a half-moon front sight with no

This model was manufactured between 1861 and 1874, this revolver was very successful commercially. Many of these were used as personal side arms by Ci

Manufactured from 1874 to 1878. The top of the barrel rib is marked "SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT" with the remainder g...

Manufactured from 1861 to 1874. This model was very successful commercially. It is marked with the one line address on top of the barrel rib, tip up a

A) Manufactured from 1860 to 1868. The top of the rib has the two line address/patent dates (1855, 1859 and 1865) marking and a half moon front sight.

This was the last variation of the Military & Police Model of 1905 manufactured from 1915 to 1942. The gun reportedly was given to Sheriff L.K. ...

This revolver features a nickel plate finish, front rounded blade and rear notch sights with the barrel marked with the standard Smith & Wesson ...

Manufactured from 1908 until 1915. This early production Smith & Wesson target revolver features pinned blade and adjustable notch rear sights, ...

Manufactured circa 1948-'51. The revolver has the standard marking and frame notch rear sights, all blue finish with casehardened hammer and tr...

A) Manufactured in 1904. Fixed sights, standard markings. Checkered circular cylinder latch on the left side of the frame, a pinned barrel, 7-round fl

Manufactured in 1940, this revolver features a Marble front sight and adjustable rear sight. The top of the barrel is marked with the two line address

Shipped from the Smith & Wesson factory originally on December 11, 1911. features the scarce six inch barrel with target sights. Two line addres...

Approximately 4,575 of these 1st Model revolvers were manufactured between 1902 and 1906. They were primarily made as a defensive weapon for women. Fi

This Second Model Ladysmith revolver was manufactured between 1906 and 1910 and features the pull forward cylinder latch located under the barrel, bla

A) Features fixed sights, with the two line address/patent dates flanked by Maltese crosses on top of the barrel, one line caliber marking on the left

A) Manufactured in 1907 features fixed sights, a checkered hammer, a smooth trigger, a fluted seven round cylinder, and black checkered grips with S

This is an attractive and interesting example of a custom engraved Smith & Wesson Registered 357 Magnum pistol that was shipped directly to an F...

A) Manufactured between 1888-1902. Standard two line address/patent date marking on the top of the fluted rib and S&W trademark on right side o...

Manufactured in 1923. The top of the barrel is marked with the two line address/patent dates, "SMITH & WESSON" on the left side and th...

Manufactured from 1910 to 1917, this gun features an integral half-moon front and rear notch sights. The custom engraving covers 90% of the gun with o

This was the last of Smith & Wesson's top break revolvers to be introduced. Manufactured from 1909 to 1920, this is a unique top break with ...

This pistol is fully covered with oak leaf pattern engraving with a punch dot background and has a gold-plated finish with no import marks. The wrap-a

This is a very rare early production Browning HP "GB" competition model with rare gold inlaid borders on each panel of the entire pistol a...

Manufactured by Fabrique Nationale in Herstal, Belgium. The pistol shows renaissance style floral scroll engraving covering approximately 90% of the g

A) This lot consists of two consecutively serialized Browning High Power semi-automatic pistols featuring an identical custom engraving by Master Engr

A) Manufactured in Belgium from 1962 to 1974. Features high blade front and adjustable rear sights, serrated gold trigger, and checkered wraparound gr

Manufactured in Belgium from 1962 to 1974. This version of the Browning Challenger pistol features the Renaissance factory engraving, a scroll floral

A) Factory engraved three gun set, all with simulated pearl grips and Renaissance style engraving featuring a vine and floral pattern and complete wit

According to the information provided by the consignor, this collection was started by his father, who was a Ruger employee from the 1950's onwa...

A) Manufactured in 1966. This revolver features floral scroll engraving on the barrel, frame, cylinder, hammer, backstrap, front sight and trigger gua

Manufactured in 1984, this revolver commemorates the 35th Anniversary of Arvo Ojala as the "Gun Coach For Hollywood". Arvo Ojala was the w...

This beautiful revolver is an exact recreation of a Colt Single Action revolver commissioned for Teddy Roosevelt. This revolver was engraved by Master

Standard markings with punch dot backed scroll engraving around the front sight, cylinder flats, frame, hammer sides and backstrap, with a pair of gol

Manufactured in 1977, in the transitional period before the 3rd Generation had the "SA" suffix replaced with the signature prefix. All of ...

The top of the barrel is marked with the standard one line address and "COLT SINGLE ACTION ARMY .45" on the left side amid the scroll engr...

Manufactured and factory engraved in 1978, the second year of 3rd Generation Single Action Army production. Standard markings on barrel, with one line

Standard barrel markings and two line, three patent dates on the left side of the frame followed by the Rampant Colt. The left side of the front and b