Rock Island - Premiere Collector's Firearms Auction

Single bead sight on top of matte vent rib, 3 inch chambers, Invector Plus choke system. Receiver contains scrolled markings surrounded by four corner

Introduced in 1999, this is Mossy Oak's proprietary Shadow Grass camouflage pattern applied to the barrel, endcap, forearm, receiver, and stock....

Manufactured in Japan this shotgun features a single bead sight on the vent matte rib with a 2 3/4 inch chamber and Invector choke tube system. The r

Single bead sight on a matte vent rib, 3 1/2 inch chambers with Invector Plus choke system. Standard receiver markings with floral scroll pattern and

Single bead sight on a matte vent rib, 3 1/2 inch chamber, and Invector choke tube system. Mounted with a gloss finish, checkered walnut forearm and p

Manufactured in Japan. Dual ivory bead sights on a matte vent rib and 3 inch chambers with ejectors. Receiver has been lightly floral scroll engraved

Manufactured in Japan with single bead sight on vent rib. Standard markings on barrel with floral scroll engraving on receiver with "BROWNING/C...

Manufactured in Belgium and assembled in Portugal. Double ivory bead sight on the matte vent rib, 3 inch chamber, Invector Plus choke system, standard

Manufactured in Japan with ivory front and mid bead sights on a matte vent rib barrel. 2 3/4 inch chambers with Invector Plus choke system. Standard m

Manufactured in 2004. Red fiber optic front and mid bead sights on the matte vent rib, 3 1/2 inch chamber and choke tube system. Barrel, stock and rec

Introduced in 1999. Features a Hi-Viz front sight, stainless steel mid bead sight, 3 1/2 inch chamber, and a choke tube system. Mounted on a ribbed Re

Manufactured in Japan. Dual ivory bead sights on the matte vent rib, 2 3/4 inch chambers, Invector Plus Choke system, and ported barrels. Mounted with

Manufactured in 2004 with standard markings, red fiber front and steel mid bead sights, 3 1/2 inch chamber, choke tube system and mounted with a blac

Single ivory bead on a matte vent rib, 3 inch chamber, and Invector choke system. Gold highlighted game scenes on the receiver. Mounted with a fancy g

Manufactured in Japan. Ported barrels, Hi-Viz and ivory bead sights on a matte vent rib, chambered 2 3/4 inches and both barrels choked skeet. Auto ej

Single bead sight on a matte vent rib, 3 1/2 inch chambers with Invector Plus choke system. Standard receiver markings with floral scroll pattern. Len

Introduced in 1999. Features a Hi-Viz front sight, steel mid bead sight, 3 1/2 inch chamber, and a choke tube system. Mounted on a ribbed synthetic fo

This is an excellent example of an extremely rare Singer Manufacturing Company, U.S. M1911A1 semi-automatic pistol marked "PROTOTYPE 3". T...

This is an excellent original example of a U.S. Model 1911.45 caliber automatic pistol that was manufactured by the Springfield Armory in 1914. The Sp

Colt Model 1903 Hammerless .32 Automatic Pistol manufactured in 1942 and shipped to Great Britain in 1944 for issue by the Special Operations Executiv

This Model 1911A1 pistol was delivered by Colt to Springfield Armory in October 1942 and is documented as once being the property of United States Mar

This dress uniform and flight suit with personal effects belonged to U.S. Marine Corps pilot Captain Charles J. "Sly" Magill who is a 1991...

This is an extremely rare and unique US Martial "Test" pistol that was originally Manufactured for 1907-1911 U.S. military test trials. Du...

This is an exceptional example of an all original, WWI Model 1911 pistol that was manufactured by the Colt Manufacturing Company. This pistol is actua

This extremely rare Model 1911A1 "Demonstration Pistol" that was manufactured by Remington Rand in 1943. These "Demonstration Pistols...

This is an example of a Colt Model 1911 manufactured in late 1918 that was part of a shipment of 20,000 pistols from Colt to the Ordnance Depot in Bus

Manufactured in the early part of 1917, this is a very nice example of an early to mid WWI U.S. Army contract Model 1911 pistol as produced by Colt. I

Manufactured in 1943. Rampant Colt flanked by the two line patent dates and address on left side of slide and U.S. property and model marking with ser

Manufactured in 1944. The left side of the slide is marked "REMINGTON RAND INC./SYRACUSE, N.Y. U.S.A .", the top is marked with a "P&...

This extraordinary Model 1903 rifle was manufactured by the Springfield Armory in 1917. The rifle has an experimental barrel with seven-groove riflin

This General Officers Model 1903 Pocket Hammerless was issued to Brigadier General John A. Hoefling and comes with the Department of The Army certific

Manufactured in 1924. This pistol was the property of Major General William N. Gillmore. General Gillmore graduated from the U.S. Military Academy at

This is a nice example of a U.S. Springfield Model 1903 rod bayonet bolt action rifle as manufactured in 1904. Like nearly all of the original product

Model 1903 rifle manufactured by Springfield Armory in 1911. The rifle has a blued barrel, bolt, barrel bands, buttplate, trigger guard and floor plat

This is an example of a very early WWI U.S. Army contract Colt Model 1911 replacement pistol, that was produced in mid-1914 and subsequently rebuilt o

This is an example of a Colt U.S. Model 1911 Pistol that was manufactured in 1918. This pistol could possibly be one of the 900 shipped to the Brookly

Manufactured in 1943. Fixed sights, with the two line, two block Colt address and patent markings on the left side of the slide, divided by the Rampan

Manufactured in 1918. The left side of the slide has the two line, two block patent dates and Hartford address along with a Rampant Colt behind the se

Manufactured in 1944. The left side of the slide has the two line Syracuse address and the right side of the frame has the "FJA" inspector...

This is an excellent example of a an original WWI US "Black Army" contract Model 1911 semi-automatic pistol that was produced in 1918. The...

Manufactured in 1944 and released to the civilian market in 1962 from the Red River Ordnance Depot. The left side of the slide has the two line, two b

This a very nice example of an original late 1944 production Remington-Rand production Model 1911A1 pistol. These pistols were the standard service pi

Manufactured between 1954 and 1957 with the standard markings and features including a fixed front and adjustable rear sights. The barrel is ported on

This is a excellent example of an late WWII Inland production M1 carbine that has been converted into the infrared sniper model by equipping it with t

Blade front and "PI" marked adjustable rear sights, with a Type III barrel band, "9-44" Inland barrel, round bolt, "M"...

This is an excellent example of a very early WWII U.S. Inland carbine with blade and two leaf sights, with early production "10-42" Inland...

Blade front and adjustable 1,000 meter rear sight, with ".30-06/41" marked on the barrel flange, five line model and five line patent mark...

This is an example of a World War II Remington Model 1903-A4 sniper rifle that was manufactured in 1943 and subsequently Arsenal refurbished. The rifl

The shotgun falls into the generally accepted serial number range of approximately 620,000 to 730,000, for WWI US Army contract trench shotguns. The l

Barrel dated "5 55" with bolt, rear windage, and elevation drums marked "HRA". The receiver has standard markings. Mounted on a ...

This U.S. Springfield M1C Sniper Rifle is equipped with an M82 Telescopic Sight fitted with a rubber eyepiece and sliding sun shade. The telescopic si

The receiver of this rifle has Remington markings which are covered by the scope mount with the serial number partially visible on the right side and

Manufactured during World War II, this is an example of a Saginaw contract U.S. M1 Carbine. Blade front and two-leaf rear sights, with a Buffalo Armes

Originally manufactured in 1944 with a Winchester barrel, trigger guard, and bolt. Battle Range rear sight with elevation knob and locking bar. The s

Manufactured in 1948. The rear lower left side of the receiver is marked with "U.S." The left side of the barrel at the breech is marked &...

Barrel dated "6-54" with barrel, bolt and elevation drum marked "HRA". Windage drum marked "DRC". The receiver has the...

Manufactured in 1940 with a "7-40" dated Springfield barrel. Standard receiver markings with a "D28287/-1/J6" marked bolt. The r...

The receiver has the "U.S." and an ordnance bomb stamping followed by "MILITARY FINISH" on the left side near the breech with th...

The rifle has a Springfield "3-66" 308 caliber barrel with a Springfield bolt. The rear receiver has standard markings with a hand marked ...

Springfield barrel dated "11-18", standard receiver ring markings, oval ejector port on the left receiver wall, and ladder rear sight. The...

The barrel is dated 12-51 and the rear peep sight has a "HRA-W" marked windage drum. Standard receiver markings with correct "H&R...

This is a representative example of a pre-war (1937) production Colt Service Model Ace that has been refinished with parkerized finish. The right side

Manufactured in 1943. Fixed sights, with the two-line, two-block Colt address and patent markings on the left side of the slide, with the Rampant colt

Manufactured in 1913 on contract by Colt for the U.S. Army. The left side of the slide has the two-line, two-block address and patent dates marking wi

This is a scarce example of a WWI era U.S. Government Model 1911 pistol frame that has been stamped with an "X" prefix replacement serial ...

Manufactured in 1912. Standard two-line, two-block address and patent dates marking with a circled Rampant Colt behind the serrations on the left side

This is a late 1918 U.S. Army contract Model 1911 automatic pistol that has been reworked by Rock Island Arsenal, probably in the post Korea timeframe

Manufactured in 1919 and released to the civilian market from the Anniston Army Depot. Left side of slide has the two line, two block address and pate

Manufactured in 1944, this pistol later passed through the Springfield Armory, where it was armorer upgraded to meet the National Match standards of 1

Manufactured in 1943. Fixed sights, with the left side of the slide marked with the intertwined "USS" company logo and "U.S. & S ...

Manufactured in 1918. Standard two line, two block patent and address markings with the Rampant Colt on the left side of the slide with model marking

Manufactured in 1945. Fixed front and adjustable rear sights, with the 2-line address and patent markings on the left side of the slide next to the Ra

Manufactured in 1943, this pistol later passed through the Springfield Armory, where it was armorer upgraded for use in the national pistol matches. S

Manufactured in 1943. The left side of the slide has the two line Ithaca address with "P" on the top. Left frame has the "FJA" i...

Manufactured in 1918 this is a late WWI production 1911. The two block Colt address and patent markings divided by the Rampant Colt appear on the left

Manufactured in 1914. The left side of the slide has the two line, two block patent dates and Hartford address with a Rampant Colt behind the serratio

Manufactured in 1943. Fixed sights, with the left side of the slide marked "ITHACA GUN CO., INC./ITHACA, N.Y.", and "P" on top, ...

The top of the barrel has the one line Hartford address and the left barrel side is marked "45 COLT". The rear of the cylinder has the par...

The revolver has the K frame with a two inch barrel and six-shot cylinder. It features an anodized blue alloy frame and cylinder with steel barrel. Ca

This is an example of a revolver that was manufactured for the U.S. Army as the Model 1894 and was delivered/inspected in 1896. Standard two line addr

This is an excellent example of a Smith & Wesson Model 1917 U.S. Army revolver, manufactured between 1917 and 1946, featuring fixed sights consi...

Serial no. 215674, 45 ACP cal., 5 1/2 inch round bbl., blue finish, walnut grips. Manufactured in 1919. Fixed front and notch rear sights, with &quo...

1) Flap holster manufactured for Model 1889/95 Colt DA revolver, black leather construction with "USN" deeply imprinted on the flap, thick...

A limited edition carbine of 500 produced by The American Historical Foundation, this being 88 of 500. Features gold plated small parts with remaining

Standard commercial markings along with "U.S. [ordnance bomb]" on the left receiver side and on top of the barrel at breech, "MODEL 1...

This USAAF Type A-2 flight jacket is a size 38 with an AAF winged star insignia stamped under the tag. The back of the jacket features a painted motif

6 1/2 inch double edged blade, with the etched Wilkinson logo on one side of the ricasso and "THE/F-S/FIGHTING/KNIFE" on the reverse. Fitt...

1) Limited Edition framed print, "We've Got Him", 3rd in the series of Lee's Peninsular Campaign. Issued circa 1996, 35 inches tal...

The included Cody letter confirms the serial number, caliber, and 20 inch barrel with the shotgun shipped on October 7, 1899 along with four other Mod

This is a contemporary cutaway demonstration model of an M1 carbine with a "5-43" dated Inland barrel. The adjustable rear peep sight is m...

Battle Range drum rear sight, standard receiver markings and a Springfield "2-43" barrel. Stock has a boxed "SA/FMcF" cartouche ...

Blade front and adjustable peep rear sights, with an undated Winchester barrel, Type II barrel band, flat bolt, milled trigger guard with "lube...

The barrel is dated "8-53" and the rear sight has a "IHC/DRC" marked windage drum. Standard receiver markings with an Internatio...

Patented by John Garand in 1944, but actually used in production starting in 1935, the clip loader device was used to speed up the process of loading

Manufactured in December of 1942, and later refurbished and outfitted in the style of an M1D sniper rifle. Fixed blade front and aperture rear sight w

Manufactured in March of 1944. Blade and flip rear peep sights, with "3-44" dated Inland barrel with a "P" marked top rear, Type...

The barrel is dated "5-55" and the rear sight drum is marked "DRC". Standard receiver markings and "H&R" bolt. The...

Manufactured between 1942 and 1944. This 1st Type high wood Winchester features blade front and flip rear peep sights. Barrel and rear of receiver are

Barrel dated "5-54" with "HRA" marked barrel, bolt and elevation drum. Windage drum is marked "DRC". Mounted on a smoo...

Hooded blade front sight and adjustable Lyman peep sight, with the barrel marked "SA/bomb/8-42" and the standard model markings on the rec...