Rock Island - Premiere Collector's Firearms Auction

Manufactured on contract by the U.S. Government in 1862. The revolver has the three screw frame cut for a shoulder stock and iron back strap. The top

Manufactured in 1866. The revolver has the large oval iron trigger guard, iron back strap and bordered hammer knurling. The top barrel flat is marked

Manufactured during the Civil War in 1862. This is a fine original example of a Colt Model 1849 Pocket revolver. The top barrel flat is marked with th

This is a very fine example of a Colt Model 1849 Pocket revolver that was manufactured in the final year of production; 1873. The revolver has the Col

This is a fine example of a Colt London Model 1851 Navy revolver that was manufactured in 1855. This is one of 23,500 Colt London Navy revolvers purch

This is a solid example of a U.S. contract Colt 2nd Model Dragoon percussion revolver. This revolver has the distinctive square back trigger guard of

Manufactured in 1856. The top barrel flat is marked with the one line New York city address, and "COLTS/PATENT" on left side of frame. The...

Manufactured in 1861, the first year of production. The top of the barrel is marked "ADDRESS COL SAML COLT NEW-YORK U.S.AMERICA", the left...

Manufactured in 1855. This revolver has the distinctive steel back strap and large oval trigger guard. The hammer spur has the bordered knurling found

Manufactured in 1861, this revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the full fluted cylinder. These revolv

Manufactured in 1859. The revolver has the round brass trigger guard and rectangular cylinder stops found on Third Model Dragoons. The top flat of the

This fine Colt Model 1851 Navy revolver was manufactured after the Civil War, in 1867. The revolver has a commercial blue finish on the barrel and cyl

The top of the barrel is marked "-ADDRESS COL SAML COLT NEW-YORK U.S. AMERICA-" and the left side of the frame is marked "COLTS/PATEN...

Manufactured in 1858. The top barrel flat has the two line New York address flanked by brackets, with "COLTS /PATENT" on the left side of ...

Manufactured in 1861, the first year of production. The Model 1862 was the last of the Colt percussion revolvers. The top of the barrel is marked &q...

Manufactured in 1860, this revolver is one of approximately 4,000 Colt Model 1860 Army Revolvers that were manufactured with the fluted cylinder. Thes

Manufactured in 1863. The top of the barrel has the standard one line New York U.S. AMERICA address, "COLTS/PATENT" on the left side of th...

Manufactured in 1856. The top barrel flat is marked with the one line New York city address, and "COLTS/PATENT" on left side of frame. The...

Manufactured in 1862. The top barrel flat is marked with the one-line New York U.S. America address, the left side of the frame is marked "COLT...

This is an example of a double face Model 1851 Colt Navy powder flask. The design depicts crossed rifles and revolvers above "COLTS/PATENT"...

Brown leather construction, with a reinforced opening and "223/crown/KM" on the flap. On the front is a pouch containing a brass capper st...

Manufactured in 1860, this revolver is one of only about 4,000 Colt Model 1860 Army Revolvers manufactured with the fluted cylinder. These revolvers a

This is a representative example of an extensively restored Second Model Colt First Model 1851 Navy square back trigger guard revolver. The first appr

Manufactured in 1868 and subsequently custom embellished and refinished in the mid 20th century. The revolver features floral scroll and punch dot eng

This is an example of a factory converted Colt Model 1861 percussion revolver to be used with rimfire cartridges. Manufactured in most cases using new

Manufactured in 1863. The top of the barrel is marked "ADDRESS COL SAML COLT NEW-YORK U.S.AMERICA", the left side of the frame is marked &...

Model 2 manufactured in 1856. The top barrel flat is marked with the pointing finger, "COLT'S PT./1855" flanked by Maltese crosses and...

This highly desirable U.S. Colt Single Action Cavalry Model revolver was manufactured in 1878. This revolver is one of 3,000 Colt Single Action revolv

This fine Colt U.S. contract Single Action Cavalry Model Revolver was manufactured in 1885. The revolver was inspected by Ordnance Inspector Captain F

U.S. Contract Colt Single Action Army revolver manufactured in 1874 and subsequently refurbished into artillery configuration. This early production S

This is a very fine example of a black powder Colt Single Action Army revolver with factory letter that states that it was shipped from Colt to Hibbar

Manufactured in 1892. Pictured in both “The Book of Colt Firearms” (Sutherland & Wilson, 1972) and “Colt Firearms From 1836” (Serven, 1954). Thi...

Colt Bisley Model Single Action Revolver manufactured in 1900. The revolver has the Colt commercial blue finish on the barrel, cylinder, trigger guard

This very fine, original U.S. Colt Model 1873 Single Action Cavalry revolver was manufactured in 1887. This revolver was sub-inspected by Ordnance ins

Manufactured in 1909 and by 1914 approximately 1,011 Colt Single Action Army revolvers were manufactured in the 38 Colt caliber. The top of the barrel

Manufactured in 1913, the last year of production for the Bisley. The revolver has the standard one line Hartford address stamped on top of the barrel

Manufactured in 1907. The revolver has the standard one line Hartford address stamped on top of the barrel, the left side of the barrel is marked (BIS

This is an excellent example of a Colt Single Action Army Revolver that was chambered for the .45 Eley Short cartridge and shipped to the Colt London

This is an excellent example of a Colt Single Action Army revolver that was manufactured in 1929. The top of the barrel is marked with the one line ad

This Colt Bisley Model Single Action Revolver was manufactured in 1903. The revolver has a the Colt commercial blue finish on the barrel, ejector hous

Produced in 1922, as part of the post World War I production run of the Colt Single Action Army revolver. Blade and notch sights, with the one line Ha

Manufactured in 1889, this is a very nice example of an early cowboy era Colt Single Action Army with the desirable nickel plated finish, engraved in

Manufactured in 1900. Blade and frame groove sights with the top of the barrel marked with the two line Hartford address and "45 COLT" on ...

Manufactured in 1922. The top of the barrel is marked with the one line address and "32 W.C.F." on the left side. The left side of the fra...

This revolver was manufactured in 1923. The top of the barrel is marked with the one line address, the left side is marked "45 COLT" and t...

This is a very fine example of a pre-war Colt Single Action Army Revolver manufactured in 1928. The top of the barrel is roll-stamped with the one-lin

Manufactured in 1910. Blade front and notch rear sights, with the two line Hartford address on top of the barrel and "(BISLEY MODEL) 45 COLT.&q...

This is a very fine example of an early pre-war Colt Single Action Army Revolver as manufactured in 1923. The left side of the barrel is roll-stamped

Manufactured in 1893. This is an original Flattop Target that has subsequently had the barrel factory replaced and transverse cylinder pin retainer ad

This revolver has a factory letter confirming the serial number and stating the caliber as .45/c, with the barrel length 5 1/2", the finish as ...

Manufactured in 1907. The top of the barrel is marked with the one line Hartford address with the left side marked "38 W.C.F." the left si...

Manufactured in 1883 and subsequently modified. The barrel and cylinder have been replaced and the revolver features New York style floral scroll and

Produced in 1904. Blade and notch sights, with the two line Hartford address on top of the barrel and "COLT FRONTIER SIX SHOOTER" roll sta...

Manufactured in 1900. Fixed blade front sight, one line Hartford address on top of barrel and "(BISLEY MODEL)/COLT FRONTIER SIX SHOOTER" ...

Remington manufactured only about 2,000 Model 1890 Single Action Army revolvers from 1891 to 1894. The Model 1890 Single Action revolver was a competi

This is a fine example of a Remington Model 1875 Single Action Army Revolver. Remington manufactured approximately 25-30,000 Model 1875 Revolvers betw

This Remington Model 1890 Single Action Army revolver was manufactured circa 1893. Remington manufactured only 2,020 Model 1890 Single Action revolver

This is an example of a Remington Model 1875 Single Action Army revolver that was manufactured between 1875 and 1879. The revolver has a full nickel p

Manufactured from 1872 to 1888 with a total production of approximately 6,000, with approximately 5,000 sold to the U.S. government. The pistol has an

Rocky Mountain blade front and notch rear sights, with the two line address and patent dates on the left side of the casehardened frame. The pistol ha

Manufactured from 1872 to 1888 with a total production of approximately 6,000, with approximately 5,000 sold to the U.S. government. The pistol has an

Manufactured in the early 1870s on government contract. Standard Remington address and patent marking along the lower edge of the left side of the fra

This Smith & Wesson revolver model was also known as the "D.A. Frontier". It is a top-break revolver which automatically ejects spent ...

One of approximately 250-300 manufactured circa1880’s on contract order for the Australian Colonial Police. The top of the barrel rib is marked with t

Manufactured circa 1873 to 1878 with approximately 85,200 manufactured, this model is commonly known as the Old Model Russian and is easily recognizab

Identical to American Models except for the barrel address and chambered for the 44 Russian rather than the 44 American. This is a commercial variatio

Introduced in 1903 this unique breech loading cannon measures 12 inches long with "- NOT FOR BALL -" marked towards the front and the two ...

Brass construction, 32 1/2 inches long with a 2.13 inch bore and 2 inch trunnions. No makers marks are visible. With a wood carriage, 18 inches wide a

Measuring 22 inches in overall length, with a 1.48 inch bore, 1.48 inch diameter trunnions and a touchhole bored through the knob. No makers marks are

1) National ROTC 1946 rifle match first place plaque. 2) Bronze Buereau Brothers percussion musket from an unknown monument, 54 1/ inches long. 3) Sma

Typically this plate would be attached to the breech end of a barrel housing and would house the spirit level. The spirit level was used in sighting t

1) "Sioux Indians in Tribal Costume, Tri-State Round-Up, Belle Fourche, S.D." photograph in a 33 1/4 inch x 9 inch wooden frame. Held in t...

This is a beautiful example of a U.S. Government inspected Colt Model 1883 Gatling gun with carriage and rare caisson. The Gatling gun was first devel

Measuring 31 1/2 inches in overall length, with a 1.67 inch bore, 2.1 inch diameter trunnions, the cannon lacks visible makers or weight marks though

Measuring 31 1/2 inches in overall length, with a 1.67 inch bore, 2 inch diameter trunnions, the cannon lacks visible weight or makers marks and appea

This is a beautiful pair of 1/2 scale mallard decoys made and painted by Charles Perdew for F.D. Loomis. Loomis and F.W. Paralee were commissioned by

This is a super example of a miniature carved mallard done by Charles Perdew (1874-1963). Perdew was the best known and most prolific decoy carver on

This is a beautiful pair of 1/3 scale mallard decoys made by Charles Perdew and painted by his wife Edna. F.D. Loomis. Loomis and F.W. Paralee were c

This is a fantastic example of a Charles Perdew (1874-1863) carved miniature mallard duck. Perdew was the best known and most prolific decoy carver on

This is a beautiful example of a flying pintail hen carved by Charles Perdew (1874-1863). Perdew was the best known and most prolific decoy carver on

This is an excellent example of a unique miniature duck call carved by Charles Perdew (1874-1963). Charles Perdew was the best known and most prolific

Painted by T. Wylie and dated 1915, this painting depicts a marsh scene featuring a flock of mallard ducks being fired upon by a hunter in the tall ma

Oil on canvas painting, unsigned, depicting a dog with pheasant in mouth in tall grass. The picture measures 29 1/2 inches high, 23 1/2 inches wide. T

Painted by A.E. Rosvalt and dated 1912, this painting depicts a woodland scene featuring a flight of quail (see image). The oil painting on canvas (11

This signed painting depicts a bird dog grasping a mallard duck in his mouth (see image). The oil painting on canvas (25 1/" x 17 1/4") ha...

This is a spectacular piece signed "ALLEN 74". Writer believes the carver to be Allen of Peoria, Illinois, circa 1974. This piece is compl...

This is a magnificent example of a life like carved spoonbill duck marked "ALLEN/"77"" on the bottom. Writer believes this to be...

This lot consists of two duck carvings done by Cline McAlpin, and copy much of the style of Charles Perdew. McAlpin was one of the better known contem

The first of these two pieces is a full size drake mallard decoy, by unknown maker, but more than likely an Illinois carver. The second is a 1/3 scale

This lot consists of two Mallard duck decoys, one hen, one drake made in the early 1900s. Both are nicely carved and painted. BBL: Stock: Gaug

This is a fine example of a porcelain President Abraham Lincoln bust produced by the Monmouth Pottery Company of Monmouth, Illinois. The back of the b

Carved out of wood, this folk art bust of President Abraham Lincoln with mesmerizing eyes measures 11 1/2 inches tall and 6 1/2 inches wide. The botto

This arrest warrant was penned by Ulysses S. Grant when he was President of the United States. The warrant is addressed to Oscar E. Mann, Sheriff of t

10 3/4 inches tall and 10 1/4 inches across the top. Stamped "3" over "J. B. ZIEGLER" in a downward arch "NT" (Nebrask...

Brown glazed stoneware construction, 6 1/2 inches tall at the lip and 9 1/2 inches wide (7 1/2 inch internal diameter), decorated with a pair of molde

1) Water pitcher with raised images of President Lincoln with his log cabin. Produced by Phich, measuring 8 3/4 inches high by 6 3/4 inches wide. 2) B

The Daum glassmaking company, also known as Daum Brothers, was originally established in the city of Nancy, France as the Verrerie Sainte Catherine, i

Measuring 8 1/2 inches tall and 4 inches wide, with the early rectangular pattern "TECO" makers mark on the underside. BBL: Stock: ...

Born in 1848 and training as a painter before moving on to other mediums, Lewis Comfort Tiffany was one of the leading American artists of the Art Nou

Circa 1896 Tiffany vase in the popular "Favrile" blown glass with pleasing iridescent colors. This particular vase is a gathered style and...