Rock Island - Premiere Collector's Firearms Auction

This Garand has been arsenal/depot converted to a M1D sniper rifle configuration. The M1D sniper rifles were an improved version of the M1Cs in that a

Late WWII production, Third Type model with blade front and adjustable rear sights on the Winchester proofed barrel. Type II barrel band with round bl

The Springfield barrel is dated "4 55" with a Springfield bolt and standard receiver marking. The rear peep sight has a "DRC" ma...

Manufactured during World War II. Blade front and flip peep rear sights, with a "10-43" dated Underwood barrel with Ordinance bomb cartouc...

Produced in January of 1942, the top of the barrel has a Birmingham proof mark and dimension mark, in the style of an arm supplied under Lend-Lease. B

Standard receiver markings with a "1-55" dated Line Machine barrel and an International Harvester bolt. The rear sight has a "IHC/DRC...

Exceptional example manufactured in 1948. Standard fixed sights, with the Hartford address on the left side of the slide and "COLT" "...

Manufactured in 1970 as a transitional model to the Series 70's. The "BB" is stamped on the barrel behind "COLT .45 AUTO" an...

Manufactured in 1951. Fixed sights with lightweight alloy frame, serrated mainspring housing and checkered diamond pattern grips. BBL: 4 1/4 inch ro

Manufactured in 1970, only 11 off from the final Super 38 produced. Fixed sights, with the one line Hartford address on the right side of the slide an

Manufactured in 1980. Standard markings with blade front and adjustable rear sights and checkered Rampant Colt medallion grips. The serial number on t

Manufactured in 1950 with fixed sights. The slide has the standard two block, two line model and caliber markings on either side of "COLT"...

This pistol is part of a limited set of 400 distributed by Talo, Inc. Equipped with an adjustable Elliason rear target sight, skeletonized trigger, je

Fixed white dot sights, beavertail grip safety, arched serrated mainspring housing and fitted with checkered wraparound rubber grips with Colt medalli

Manufactured with fixed sights, flat serrated mainspring housing and fitted with checkered rubber grips with Rampant Colt imprint. With blue plastic C

Manufactured with a fixed front and adjustable Elliason rear sights, beavertail grip safety, checkered flat mainspring housing and fitted with checker

Standard slide and frame markings, Elliason rear sight, adjustable trigger, and fitted with checkered walnut grips with gold Colt medallions. With Col

Manufactured with fixed white dot sights, a flat serrated mainspring housing and fitted with checkered walnut grips with Colt medallions. The barrel i

This pistol is a limited edition of only 750 produced. Features fixed sights on a slide that is scroll engraved and gold enhanced on both sides. Ambid

Slide and frame have the standard markings, blade front and Elliason rear sight, and skeletonized trigger. Fitted with checkered Colt medallion grips.

Features a compensated barrel with fixed white dot sights, skeletonized hammer and trigger, and a flat serrated mainspring housing. Fitted with diamon

Manufactured as 1 of a limited edition of 300 pistols manufactured for Talo Inc. With fixed front and adjustable Champion rear sights, flat serrated m

This limited edition was manufactured to replicate the firearm issued to the Armed Forces in WWII, Korea, and Vietnam. Less than 911 were made. Featur

Introduced in 1985 as a shortened version of the Government Model. Features fixed white dot sights, skeletonized hammer, serrated trigger, and wraparo

Manufactured with fixed white dot sights, beavertail grip safety, serrated flat mainspring housing and fitted with checkered rubber grips with Rampant

Standard markings with fixed three dot sights, serrated hammer, and smooth trigger. One-piece wraparound grip with silver Colt medallions. Complete wi

1 of only 2,500 manufactured in 1971 to commemorate 100 years of the NRA. Fixed front sight and adjustable rear sight. The left side marked "18...

Manufactured in 1982 with a Patridge front and adjustable Elliason rear sight, and adjustable trigger. Fitted with two piece stag grips. Includes a Co

Manufactured in 1991. This pistol features standard slide markings, three dot combat sights, smooth trigger, serrated round hammer, and fitted with wr

Manufactured in 1951. Fixed sights, with the model, caliber and Rampant Colt markings on the left side of the slide and the address on the right. Fitt

Manufactured in 1985 with fixed front and adjustable Elliason rear sights, smooth beavertail grip safety, serrated flat mainspring housing, serrated a

This is an exclusive edition of 400 produced that features fixed white dot sights, combat hammer, lightweight trigger, and smooth polished grips with

Fixed front and adjustable Elliason rear sights, beavertail grip safety, flat checkered mainspring housing and fitted with checkered wraparound rubber

Manufactured with fixed sights, extended thumb safety, beavertail grip safety with ridge, flat serrated mainspring housing and fitted with rosewood do

Features blade front sight, rear peep sight, skeletonized hammer and trigger, and fitted with checkered Colt medallions grips and finger groove extens

Introduced in 1983. This pistol features fixed sights, serrated trigger, two-piece checkered grips with gold Colt medallions. Complete with Colt box n

Manufactured with fixed sights, serrated flat mainspring housing and fitted with checkered rubber grips with Rampant Colt imprints. With blue plastic

Manufactured as a limited edition of 750 that features a scroll engraved and gold etched slide. Lightweight hammer and trigger, and fitted with smooth

Manufactured from 1970-1976. Features standard markings, fixed sights, serrated arched mainspring housing, and silver Colt medallion grips. Complete w

Standard markings. Features fixed sights, skeletonized hammer, serrated trigger and arched mainspring housing. Fitted with wraparound grips with Colt

This pistol was manufactured with the standard markings and features but was finished with a special desert camouflage finish and kept as a display pi

This pistol features a Nowlin 45 ACP barrel fitted with a blued compensator, fixed blade front sight paired with a Bo-Mar target sight, ambidextrous t

Features standard slide markings, fixed front sight with a Bo-Mar adjustable rear sight, skeletonized trigger and hammer, ambidextrous thumb safety, a

The Heirloom Edition was offered beginning in 1986 and were available with personalized serial numbering. Colt high polish blue with jeweled trigger,

Produced in cooperation with the Gunsite Academy. The slide is marked "COLT GUNSITE PISTOL" on the left and "COLT GOVERNMENT MODEL&qu...

This is a Talo exclusive with only 400 produced. Equipped with an adjustable Elliason rear target sight, skeletonized trigger, jeweled hammer, and fan

Introduced in 1996. Features adjustable target sights, skeletonized hammer and trigger, and fitted with a finger groove Hogue grip. Complete with orig

Standard slide markings with forward serrations, fixed three dot sights, combat hammer, and skeletonized trigger. Fitted with checkered double diamond

Introduced in 1998. This pistol features three dot sights on a stainless steel slide with standard markings on a matte finish lightweight aluminum all

This pistol was manufactured in the Colt Custom Shop with fixed front and adjustable Bo-Mar rear sight, ambidextrous extended thumb safety, beavertail

Manufactured in 1979 with fixed low profile sights and fitted with checkered walnut grips with Colt medallions. With Colt .22 conversion kit. The conv

Manufactured between 1957-1970. Features Patridge front and Elliason rear sights, adjustable trigger, and gold Colt medallion grips. Complete with Col

Fixed three dot sights, combat style hammer, adjustable trigger, and double diamond checkered grips. Complete with original blue Colt hard case, cable

Manufactured from 1970 to 1983. Patridge front sight, adjustable Elliason rear sight, adjustable skeletonized trigger, serrated hammer and checkered g

Fixed low profile sights, combat style hammer, serrated arched mainspring housing, and fitted with checkered walnut grips with Colt medallions. Comple

1) The Colt .22 Long Rifle Conversion Unit consists of a blue slide with fixed front and adjustable rear sights, slide stop, recoil spring, ejector an

Manufactured circa 1988 to 1997. One of 100 produced. Custom nickel finish with fifty percent coverage scroll leaf pattern custom engraving. New smoot

Manufactured between 1991 and 1998 with the standard features and markings. Fitted with smooth ivory grips. BBL: 4 inch vent rib Stock: Gauge:

Manufactured in 1971 with the standard markings and features. With Colt "wood grain" box numbered to the gun. BBL: 4 inch vent rib Sto...

Manufactured in 1981 with standard markings and features. Complete with factory box numbered to the gun and manual. BBL: 6 inch vent rib Stock:

Manufactured in 1988. Standard markings and features. BBL: 8 inch vent rib Stock: Gauge: 357 magnum Finish: blue Grips: checkered walnut

Manufactured in 1997. Standard markings and features with a factory ported barrel and the top strap has been drilled and tapped for scope mounting. In

Manufactured in 1978. Standard markings and features. Complete with Colt "wood grain" box numbered to the gun and instruction manual. BB...

Introduced in 1955. Standard markings and features with oversized checkered walnut grips. BBL: 6 inch vent rib Stock: Gauge: 357 magnum Finis

Manufactured in 1941. Marked "COLT-KING SUPER TARGET" on the left side of the rib and fitted with a fully adjustable rear sight and interc...

Manufactured in 1997. Standard markings and features with factory laminated two-piece three finger groove grips with silver Colt medallions. In the or

Standard barrel and frame markings, front sight with insert, Leupold M8-4X scope with Weaver mounts and checkered wraparound Pachmayr Presentation gri

This is an excellent example of a very difficult to find Colt 150th Anniversary "Double Diamond" pistol set that includes both the Colt &q...

Manufactured in 1957 with fixed front and adjustable rear sights. Fitted with smooth ivory grips. BBL: 6 inch vent rib Stock: Gauge: 357 magnum

Manufactured in 1977. Features a pinned front sight, adjustable target rear sight, Rampant Colt marked frame, checkered hammer, and serrated trigger a

This revolver was manufactured in 1988 with fixed front and adjustable rear sights. Fitted with checkered ivory grips with gold Colt medallions. BBL

Introduced in 1955 and continued till 2005 this near new revolver features ramp front sight with red insert and adjustable white outline rear sight, s

Manufactured in 1981, this Colt Python revolver is fitted with a 2 1/2 inch vent rib barrel. The sides of the barrel have the standard markings and th

Manufactured in 1958 with ramp front and adjustable rear sights. The trigger is serrated, the hammer is checkered, and fitted with two-piece checkered

Manufactured in 1971. Ramp front sight with red insert and adjustable white outline rear sight, standard markings on the barrel, and Rampant Colt mar

The Cadillac of Colt's Double Action line, manufactured in the U.S.A. Fixed front sight and adjustable rear sight, standard markings. Serrated ...

Late 1990s manufacture. Bright stainless steel with ramped blade front sight with red insert and adjustable white outline rear sight. Barrel marked wi

Manufactured in 1976. Serrated ramp front and adjustable rear sights, standard smooth trigger and wide serrated hammer. With standard markings and fac

Manufactured in 1963, this revolver has a fixed front and adjustable Elliason rear sights. Fitted with custom checkered right handed target grips. Wit