Nov/Dec. Premiere Firearms Auction

Estimate: $1600 - 2500 Fixed blade front sight and folding ladder rear sight graduated to 900 yards. The top of the receiver is marked "MODE...

Estimate: $850 - 1300 This is a Second Type Merrill carbine. The lock plate is marked "J.H.MERRILL BALTO. /PAT JULY 1858,/APL.9. MAY 21-28-6...

Estimate: $1200 - 1700 Manufactured by Richardson & Overman of Philadelphia with a total production of about 12,700 in the 50 caliber. This i...

Estimate: $900 - 1400 The lock and barrel are dated "1863". The lock has the "eagle/U.S." motif and "SAVAGE R.G.A. Co./M...

Estimate: $2250 - 3500 This example is one of about 3,000 Sharps New Model 1859 Carbines with brass furniture. The state of Georgia bought approxim

Estimate: $1800 - 2750 This is a Second Model carbine (also known as the "Model 1863") as manufactured by the Massachusetts Arms Compan...

Estimate: $1400 - 2250 Pinched blade and two leaf sights with the lock plate marked with the two line Gallager 1860 patent date marking and the thr

Estimate: $1200 - 1700 Manufactured by H. Merrill of Baltimore, Maryland, Merrill carbines were issued to Union cavalry regiments in New York, Pen

Estimate: $1000 - 1500 This shotgun has a Gallager patent carbine action that is marked with the two line 1860 Gallager patent marking and three li

Estimate: $850 - 1300 The carbine has the distinctive guide screw in the right side of the receiver. The barrel is fitted with a folding two-leaf r

Estimate: $5500 - 8000 This is a spectacular example of a Remington Model 1863 "Zouave" rifle that was manufactured circa 1862 - 1865 w...

Estimate: $4000 - 7000 Regulation Regulation U.S. Model 1850 Staff & Field Officer's sword carried by Colonel Abraham Hare, Commander of ...

Estimate: $2000 - 3000 Pin front and notch rear sights, with the three-line Savage & North markings on the topstrap. The smooth grip panels s...

Estimate: $4500 - 6500 Manufactured circa 1861-62 this Civil War era revolver was manufactured by the Joslyn Firearms Company of Stonington, Connec

Estimate: $2250 - 3750 Approximately 2,000 of these revolvers were manufactured by Hoard's Armory, Watertown, New York circa 1863 and 1864. M...

Estimate: $2750 - 3500 This is an example of a U.S. martially inspected Starr Model 1858 DA Revolver. The frame has the New York address on the lef

Estimate: $3500 - 4750 Manufactured circa 1860-'61 with a total production of only about 100, this extremely rare revolver has a brass frame...

Estimate: $1600 - 2500 Manufactured circa late 1850s to early 1860s. The left side of the frame has the one line address and the right side has the

Estimate: $850 - 1300 Manufactured from the late 1850s to the early 1860s, this 5th Type revolver features a brass post front and frame notch rear

Estimate: $1300 - 1800 This is one of an estimated 5,000 Army Model revolvers manufactured by Rogers & Spencer Co. for a U.S. contract issued...

Estimate: $1600 - 2500 This is an example of a martially inspected Remington New Model Army Transitional Revolver. Transitional New Model Army Rev

Estimate: $1200 - 1800 This is one of an estimated 500 pocket navy percussion revolvers manufactured by C.R. Alsop of Middletown, Connecticut, circ

Estimate: $2500 - 3750 Approximately 20,000 of these unique revolvers were manufactured from 1861 to around 1865. Approximately 12,000 were purchas

Estimate: $1400 - 2250 One of an estimated 5,000 Army Model percussion revolvers manufactured by the Rogers & Spencer Co. for a U.S. Ordnance...

Estimate: $850 - 1300 Manufactured from 1857-59 with fewer than 200 of these unique revolvers produced. Patent information on the hammer sides and

Estimate: $1600 - 2500 Manufactured between 1866-1870 with the top of the barrel marked with the naval anchor and standard Remington markings on th

Estimate: $1300 - 1900 Manufactured from 1863 to 1875. The revolver has the standard three line New Model barrel marking on the top barrel flat. Si

Estimate: $2500 - 4500 This mahogany partitioned case is for a Remington Model 1858 Army revolver. The case has six compartments and is lined in bl

Estimate: $2250 - 3250 Approximately 2,000 of these revolvers were manufactured by Hoard's Armory, Watertown, New York, circa 1863 and 1864. ...

Estimate: $2500 - 3500 The top strap is marked "DEANE ADAMS & DEANE/30 KING WILLIAM ST. LONDON BRIDGE". The revolver has a floral s...

Estimate: $2000 - 3000 Approximately 20,000 of these unique revolvers were manufactured from 1861 to around 1865. Approximately 12,000 were purchas

Estimate: $2000 - 3000 Made from 1857 to 1861. Blade front and notch rear sights, with the Kerr's Patent marking on the loading lever, the Ma...

Estimate: $1600 - 2250 Approximately 23,000 of these revolvers were manufactured in the late 1850s and early 1860s, most of them for the U.S. gover

Estimate: $1400 - 2250 Manufactured in 1850 - '51, with a total production of around 1000, this is a scaled down version of Massachusetts Arm...

Estimate: $1000 - 1800 This is an example of one of about 3,400 Pettengill Army Model Revolvers manufactured in the early 1860s. Approximately 2,00

Estimate: $900 - 1400 Manufactured from 1863 to 1875. The barrel has the standard three line New Model marking and there are single letter inspecti

Estimate: $1100 - 1600 Manufactured between 1863 and 1865, approximately 25,000 Model 1863 revolvers were purchased by the U.S. Government. The lef

Estimate: $1800 - 2750 This is an example of a Civil War Model 1858 double-action revolver manufactured under government contract by the Starr Arms

Estimate: $20000 - 30000 This is a fine example of a highly desirable U.S. Springfield Model 1875 Officer's Rifle manufactured between 1875 a...

Estimate: $16000 - 25000 During the post Civil War period the U.S. Government experimented heavily with developing metallic cartridge rifles. One o

Estimate: $2750 - 3500 The U.S. Springfield Model 1884 Trapdoor Cadet Rifle is similar to the Model 1879 Cadet with a 29 1/2 inch barrel. The major

Estimate: $5500 - 7000 This conversion was performed circa 1871 when approximately 1,108 of these carbines were refurbished by Springfield Armory a

Estimate: $4500 - 6500 This is an exceptional example of a U.S. Springfield Armory Second Model Allin Conversion rifle as produced circa 1866. Ther

Estimate: $2000 - 3000 Even though these are called Model 1870s, this particular example is one of only 300 manufactured with the Model 1874 action

Estimate: $5000 - 8000 This is an exceptionally nice example of a Spencer carbine that was manufactured by the Spencer Repeating Rifle Company, Bos

Estimate: $3500 - 4750 This an extremely nice example of a breech loading Peabody carbine that was manufactured by the Providence Tool Company, Pro

Estimate: $2500 - 3750 This is a fine example of an unaltered, totally original Spanish-American War era U.S. Springfield Model 1896 Krag carbine.

Estimate: $3750 - 5500 During the post Civil War period the U.S. Government experimented heavily with developing metallic cartridge rifles. One of

Estimate: $3750 - 4750 The Model 1878 is an internal hammer, breech loading single shot rifle manufactured from 1878 to 1881 with a total productio

Estimate: $3000 - 4000 The rifle is fitted with a Buffington rear sight with precise windage and elevation adjustments and a fixed front sight. The

Estimate: $2500 - 3750 One of only 753 bolt action Chaffee-Reese rifles manufactured by Springfield Armory in 1884. This action was invented by Gen

Estimate: $1200 - 1800 These scarce rifles were manufactured with the same action as the Winchester-Lee Straight Pull Rifle adopted by the U.S. Nav

Estimate: $2250 - 3000 Part of a limited 1,011 arm production run, the U.S. Model 1871 Ward-Burton rifle was a competitor to become the standard we

Estimate: $1500 - 2500 The top of the bolt is marked "BETHEL BURTON'S/PATENT". The left side of the receiver and barrel have Britis...

Estimate: $2250 - 3250 This is a Custer era Model 1873 Carbine with the serial number below 43,000 (11272). It has a rear sight graduated to 1,200

Estimate: $1800 - 2750 This is a nice example of an original Springfield Model 1884 Trapdoor rifle manufactured circa 1885. The casehardened low ar

Estimate: $1400 - 2250 Manufactured by Springfield Armory on royalty agreement with the Remington Arms Co. from 1871 to 1872. The right side of the

Estimate: $850 - 1300 This is an example of a Springfield 1868 Trapdoor Rifle manufactured circa 1869. The barrel, barrel bands and trigger guard a

Estimate: $16000 - 22500 This is an example of a U.S. Model 1875 "Trapdoor" Officer's Rifle that was manufactured by Springfield Ar...

Estimate: $13000 - 19000 This is an extraordinary example of a very rare, one of only 100, Springfield Model 1888 "Positive Cam" trapdo...

Estimate: $8000 - 11000 This very early production Springfield Model 1873 carbine was manufactured circa 1874. The rear sight has the early stepped

Estimate: $2500 - 4000 This carbine is equipped with a front sight/bayonet stud and a ladder rear sight graduated to 1,200 yards. The barrel, corre

Estimate: $5000 - 7500 This is an interesting weapon with a period modified/decorated stock. There is a blade front sight and a correct rear sight

Estimate: $1000 - 1500 These Hotchkiss Second Models can be distinguished by the safety located on the top left side of the receiver and the magazi

Estimate: $900 - 1200 "R" marked Model 1884 Buffington rear sight and action with a hooded blade front sight. The lock plate has the ea...

Estimate: $700 - 900 This is an example of al Springfield Model 1884 Trapdoor rifle manufactured circa 1889. The lock is marked with the eagle shie

Estimate: $1400 - 2250 Introduced in 1879 this is a First Model Hotchkiss Carbine. The safety and turn button magazine cut-off is located above the

Estimate: $950 - 1600 This is an example of a U.S. Springfield Model 1884 Rifle that was manufactured circa 1887. The rifle has the following parts

Estimate: $900 - 1300 Manufactured originally in 1896-7 and subsequently refurbished by Arsenal circa 1902. The rifle has a rear sight graduated to

Estimate: $1200 - 1800 This carbine receiver falls into the Custer Era Trapdoors with the serial number below 43,700. The carbine was subsequnetly

Estimate: $500 - 800 Carbine length barrel with the receiver marked "U.S./MODEL 1898. SPRINGFIELD ARMORY" followed by the serial numbe...

Estimate: $3500 - 4750 Produced for trial in 1900, with the idea of having a bayonet which could double as a brush knife. 13 3/4 inches overall, wi

Estimate: $1400 - 2250 This is an example of a Remington-Lee Model 1882 rifle that was part of a Chinese contract with an early production 28 inch

Estimate: $1100 - 1600 The ski-slope rear sight is graduated to 1,200 yards and is marked with the letter "R". The lock plate has the e...

Estimate: $1400 - 2250 Manufactured between 1896 and 1898 with less than 20,000 total made. Fixed front sight with 1896 carbine rear sight graduate

Estimate: $900 - 1400 Action in Model 1879 Carbine with Model 1884 sight and breechbolt. Proof marked "V, P" over the Eagle Head proof ...

Estimate: $1600 - 2500 Manufactured as part of the 1898 U.S. Navy contract. The chamber is stamped "-U.S.N.-/ /No 88874/-N.C.T-". The l...

Estimate: $900 - 1400 Standard Remington receiver markings and the front barrel band marked "U". The rear sight has a base graduated fr...

Estimate: $14000 - 22500 This is an extremely rare example of a factory engraved Colt Model squareback 1851 Navy revolver that was manufactured in

Estimate: $8000 - 12000 This is an example of a commercial production Colt Model 1860 Army revolver that was manufactured in 1863. This revolver ha

Estimate: $4500 - 6000 Manufactured circa 1859 to 1868. This example is a Model IV and features factory floral scroll and punch dot engraving on th

Estimate: $30000 - 45000 A) Cased pair of Colt percussion Model 1862 Police revolvers that were manufactured in 1866. The revolvers have a presenta

Estimate: $85000 - 130000 This is a highly sought after example of a Colt Belt Model Paterson Revolver No. 2 with the original factory case and acc

Estimate: $35000 - 55000 This is an extremely rare example of a desirable Paterson No. 3 Belt Model Revolver. Samuel Colt manufactured approximatel

Estimate: $11000 - 17000 This is an example of a Colt Paterson Belt Model charger. It is marked "Patent Arms M'G. Co. Paterson N-J. Colt...

Estimate: $20000 - 35000 The Colt Paterson Texas Model charger is the largest of the pistol flasks. This charger is also known as the Paterson Hols

Estimate: $2000 - 4000 Manufactured circa 1837-1838, with only 200 produced. Measuring 1 7/8 inches long with square shoulders and 2 inches in diam

Estimate: $2500 - 3750 This Colt Paterson rifle .44 caliber bullet mold is stamped with the number "57" on the hinge pin and it has a s...

Estimate: $1500 - 2500 Measuring 3 1/4 inches tall and 2 1/8 inches wide, this is an early capping device for Colt's Paterson Revolver. Fitte...

Estimate: $900 - 1400 1) Paterson combination tool, 5 1/4 inches overall, with screwdriver, loader, nipple wrench and pick. 2) Ehlers multi-tool, q

Estimate: $9500 - 16000 This is an example of a Colt London Model 1851 Navy Revolver that was manufactured circa 1855. The revolver has a high poli

Estimate: $12000 - 18000 According to the included factory letter, this revolver was one of 300 shipped to the Commanding Officer of the Brooklyn N

Estimate: $6500 - 8500 This is a Colt civilian Third Model Dragoon revolver that was manufactured in 1854. The revolver has the distinctive combina

Estimate: $20000 - 40000 This is a rare example of a Factory Engraved Presentation Colt Model 1849 Pocket Revolver that was manufactured in 1855. T

Estimate: $5500 - 7500 This Colt Model 1851 Navy revolver was manufactured in 1867. This late Fourth Model Navy revolver has the Colt commercial

Estimate: $14000 - 22500 This is a rare example of an original U.S. shoulder stock for a Colt Model 1860 Army Percussion Revolver. The serial numbe

Estimate: $1000 - 1500 Measuring 14 1/2 inches wide, 6 1/4 inches deep and 2 inches tall, this mahogany case is configured for a Colt Model 1851 Na

Estimate: $60000 - 90000 A) This is a rare pair of Colt factory cut-away Model 1851 Navy revolvers, serial number 68687 and serial number 68688, th

Estimate: $2000 - 4000 Measuring 15 3/4 inches wide, 9 1/2 inches deep and 2 1/2 inches tall, this mahogany case is configured to hold a pair of Co

Estimate: $7000 - 9000 This is a Colt Model 1862 Police revolver that was manufactured in 1862 and subsequently New York engraved. The revolver has