Premiere Firearms Auction

No makers marks are visible on the exterior of this pistol, which has the barrel and lock running alongside the 4 3/4" single edged blade, with...

Produced circa 1870-1887 by Iver Johnson and their predecessors Iver Bye and Company, and distributed by James Brown and Company. Manufactured without

Manufactured in the 1870s with total production estimated at 1,000. Blade and notch sights, with the two line address and patent marking on the left b

Made by Hyde & Shattuck of Springfield, Massachusetts circa 1870-1880s, with the exact number produced unknown. Produced without sights on the t...

Rare "Invisible Defender", four-shot, palm pistol manufactured by the C.S. Shattuck Arms Co., of Hatfield, Massachusetts, from 1907-1915. ...

Manufactured from 1868 to 1882, with a total production of about 10,690. The left side of the top strap is marked "MY FRIEND PAT'D. DEC. 2...

Two folding knives flank the fold up trigger. One blade is a 3 1/8 inch double sided and the other is a 2 1/8 inch single edge blade. Both are marked

Produced by Tiffany & Co of New York, time frame unknown, this cap gun is shaped like a small revolver, 5" in total length, with "ECHO...

The Minneapolis Palm Pistol is smaller than its similar counterpart, the Chicago Palm Pistol. Only seven shots are held in the revolving turret. The c

Manufactured by Sharps from 1859 to 1874, this particular pistol is a Model 1C. It has a fluted standing breech, rounded grip to frame juncture and th

Made from 1859 to 1874. Fixed sights, with "C. SHARPS/ PATENT 1859" around the hammer screw on the left side of the frame and "C. SHA...

Pinned front and notch rear sights, with the fluted standing breech and round grip-to-frame junction. Nickel finished barrels with silver plated frame

Left side of the frame is marked "TIPPING & LAWDEN / SHARPS' PATENT" round the hammer screw and the right side is unmarked. Pairs ...

Produced between 1859 and 1874, with a total production of about 4,000. The right side of the frame is double stamped "C. SHARPS PATENT / JAN. ...

Approximately 10,000 of these magazine pistols were manufactured from 1871 to 1888. This Joseph Rider design is one of the most unusual of 19th centur

Blade front and hammer notch sights, with a folding, 3-inch spear point dagger blade fitted to the underside of the barrel, spring loaded lock, and re

Approximately 14,000 of these derringers were manufactured in 1868. The top of the barrel rib is marked "E. REMINGTON & SONS ILION N.Y. / E...

Produced between 1865 and 1888, 41 caliber was the largest production chambering for the Vest Pocket Derringer. Pin and notch sights, with "REM...

Produced between 1865 and 1888. Pin and notch sights, with the two line address and patent dates on top of the barrel. Serial number present on the le

Manufactured from 1888 to 1911. Top of the barrel rib marked "REMINGTON ARMS Co. ILION, N.Y." Manual extractor, spur trigger and fitted wi...

This is an example of a Type I, late production, a.k.a. Model 2 derringer manufactured in 1868 with the manual extractor. The top of the barrel rib ha

A) Manufactured circa 1875, this early production New Model One revolver has the distinctive revolving recoil shield. About 650 of these early product

Manufactured from 1865 through 1888, commonly known as the Saw Handle Deringer, this pistol is chambered for the rare .30 rimfire caliber, with a tota

Manufactured from 1863 to the 1870s. The five shot fluted barrel block is marked "MANUFACTURED BY E. REMINGTON & SONS. ILION. N.Y. / ELLIOT...

Produced between 1871 and 1888. Blade and peep sights, with the standard two-line "E. REMINGTON & SONS, ILION, N.Y. / RIDERS PAT. AUG. 15, ...

Manufactured circa 1870. Made for use by ladies, this ring gun was designed to fit on the small finger. This is a pinfire ring revolver which measures

Manufactured from 1868 to 1882, with a total production of about 10,690. This is an early production marked simply "MY FRIEND" on the left...

Manufactured from 1864 to 1872 with a total production of about 3,000. Marked "WM W. MARSTON / PATENTED / MAY 26. 1867 / NEW YORK CITY / IMPRO...

Blade front and notch rear sights, with scroll engraving on the barrel, cylinder and frame, and zigzag borders on the frame and barrel lug. Marked &...

This Belgium Cutlass is marked "ELGIN'S PATENT / BREVETTE" on the left side of the boxlock action in a scroll banner, and "AUGUST...

Fitted with a pair of blades, 3 3/8" clip point and 2 3/4" spear point, marked "NON.XLL/ UNWIN&/ RODGERS/ PATENT" on the lef...

This is an all-metal folding grip double action revolver, similar to the Novo design. The grip is floral engraved, with a spring loaded retaining stud

Manufactured by Moore circa 1860 to 1865. No visible barrel address or serial number, with no front sight. The silver plated brass frame has a broad s

Featuring a barrel with a band of floral engraving, and the right side of the frame has a similar pattern around the edge, with "THE PROTECTOR/...

Manufactured from 1868 to 1882, with a total production of about 10,690. The left side of the top strap is marked "MY FRIEND PAT'D. DEC. 26...

Henry lever-action rifle manufactured by the New Haven Arms Co., in 1863. The rifle has the early production features that include receiver rear sight

This is an example of a scarce Warner Carbine designed by James Warner of Springfield, Massachusetts and manufactured for him by the Massachusetts Arm

The Palmer carbine, manufactured by E.G. Lamson & Co., of Windsor, Vermont, is significant as the first metallic cartridge, bolt-action weapon a...

Manufactured from 1865 to 1866. This particular Spencer 1865 carbine is the more desirable variant which lacks the Stabler cut-off. The top of the rec

Contracted by the U.S. government during the Civil War with approximately 5,000 of these carbines having been manufactured in 1865. It is unknown if

This rare Civil War 1863 U.S. Double Rifle Musket was manufactured by J.P. Lindsay in 1863-64. The Ordnance Department purchased 1000 of these two-sho

Manufactured circa 1862 - 1865. The lock plate on this rifle is dated 1863 behind the hammer, has the eagle/shield over "U.S." and "R...

This is a solid example of a U.S. Army Spencer Model 1860 rifle. Front sight doubles as lug for socket type bayonet, with a folding ladder rear sight

This Colt Model 1861 Special Rifle-Musket was manufactured in 1864. The musket is "National Armory Bright' with an oil-finished, stock. The...

Burnside Carbine was manufactured by the Burnside Rifle Co., of Providence, Rhode Island, in 1863-1865. The carbine has the distinctive guide screw in

This unissued ball Repeating Carbine was manufactured by Lamson & Co., of Windsor, Vermont, as part of a 1000 carbine Civil War contract with th...

U.S. Contract Second Model Maynard Carbine manufactured by the Massachusetts Arms Co., of Chicopee, Falls, Mass., between 1863 and 1865. Also known as

These Cadet Muskets were made from 1851-1853 and utilized the small Model 1847 Musketoon lock. A total of 4000 of these scaled-down muskets were manuf

Fitted with the distinctive Maynard tape primer, the lock is dated "1859" behind the hammer and stamped "U.S./SPRINGFIELD" below...

This is a nice example of a Type I Model 1863 Springfield Rifle Musket with "1863" dated lock plate and barrel. The musket has "Natio...