Premiere Firearms Auction

Estimate: $1800 - 2750 Approximately 20,000 of these unique revolvers were manufactured from 1861 to around 1865. Approximately 12,000 were purchas

Estimate: $1400 - 2250 Manufactured from 1854 to 1857, approximately 850 of the two types of single shot breech loading pistols were manufactured b

Estimate: $1600 - 2250 Approximately 23,000 of these revolvers were manufactured in the late 1850s and early 1860s, most of them for the U.S. gover

Estimate: $2750 - 4250 This is one of the estimated 500 Army Model 1861 Signal Pistols manufactured by William Marston of New York. All brass const

Estimate: $7500 - 15000 Manufactured circa 1864 to 1865 by the Lee Firearms Company of Milwaukee, Wisconsin, with a very limited number produced. T

Estimate: $3750 - 6500 Fixed blade front sight and carbine style folding rear sight graduated to 900 yards. The top of the receiver is marked &qu...

Estimate: $2750 - 4250 The Smith Carbine was manufactured by the Massachusetts Arms Co., Chicopee Falls, Massachusetts and was one of the most impo

Estimate: $1200 - 1800 This lot includes three Winchester Repeating Arms Company Metallic Cartridge Boxes for Spencer Arms, 56-50, 56-56 and 56-46

Estimate: $3500 - 4750 This is an example of one of the Civil War Sharps New Model 1863 Carbines that were converted post Civil War to fire the .50

Estimate: $2750 - 4500 Manufactured from 1852-55 with a total production of about 1,857, some of which were sold on U.S. Army and U.S. Navy contrac

Estimate: $1400 - 2250 Manufactured from 1863 to 1865. The top of the barrel ahead of the replaced reproduction rear sight is marked with the three

Estimate: $1500 - 2250 Manufactured from 1853 to 1855 by Robbins & Lawrence of Windsor, Vermont, with a total production of approximately 4,9...

Estimate: $1500 - 2500 29 3/4 inch straight blade with etched scroll and patriotic decoration on the sides. Gilt brass hilt, with an "EKB&qu...

Estimate: $1800 - 1750 Non-regulation Foot Officer's sword with French Klingenthal blade. The hilt is stamped with the encircled "three-...

Estimate: $1300 - 1900 Model 1850 Foot Officer's Sword with Solingen blade imported by W.H. Horstmann & Sons of Philadelphia. The sword h...

Estimate: $1200 - 1700 36 inch curved single fuller blade, with gold accented engravings in niter blue fields on each side. Silver finished hilt wi

Estimate: $850 - 1300 31 inch straight blade with etched scroll and patriotic decoration on the sides, a small bear proof on the right ricasso, and

Estimate: $1600 - 2500 This is an example of one of the Civil War Sharps New Model Carbines that were converted post Civil War to fire the .50-70 G

Estimate: $1800 - 2750 The Navy purchased a small quantity of Sharps New Model 1859 carbines. The major characteristic of these carbines was that t

Estimate: $2000 - 3000 This is an example of one of the Civil War Sharps New Model Carbines that were converted post Civil War to fire the .50-70 G

Estimate: $1100 - 1600 This is an example of a Model 1862 Sharps & Hankins purchased by the U.S. Navy between 1862-1865. The carbine features...

Estimate: $1600 - 2500 This is an example of one of the percussion Civil War carbines converted during the Indian Wars, to fire the .50-70 center f

Estimate: $1000 - 1500 This lot consists of: 1) An original Sharps square primer tin containing two brass primer tubes 2) Martially inspected Mode

Estimate: $1400 - 2250 30 1/2 inch curved single fuller blade, with gold accented engravings in niter blue fields on each side. Gilt finished hilt

Estimate: $1300 - 1900 31 3/4 inch single fuller straight blade, with gold accented engraving set against niter blue fields on the bottom third of

Estimate: $1300 - 1900 1) 32 inch double fuller blade, with the three line Philadelphia address on the left ricasso, an etched leafy vine on the sp

Estimate: $1300 - 1900 31 1/4 inch single fuller straight edge blade, with floral and armament themed engraving on each side of the blade and a fai

Estimate: $1200 - 1700 29 1/2 inch curved single fuller blade, with gold accented engravings, etched floral and martial panels and niter blue field

Estimate: $950 - 1400 29 3/4 inch straight single fuller blade, with gold accented engravings in niter blue fields on each side. Gilt brass hilt wi

Estimate: $1100 - 1600 30 1/4 inch double fuller blade, with the "Ames MFG Co./Chicopee/Mass" address on the left side above the ricass...

Estimate: $3750 - 6500 This is a much sought after example of an early Sharps New Model 1859 Carbine with the brass barrel band, patch box and butt

Estimate: $3500 - 5500 This is an example of 1 of the 600 Model 1855 carbines purchased on contract by the "U.S. Army. Marked with standard ...

Estimate: $3500 - 5500 Manufactured from 1852-55 with a total production of about 1,857, some of which were sold on U.S. Army and U.S. Navy contrac

Estimate: $2750 - 4250 This is an example of a Civil War production Sharps New Model 1863 carbine that was converted to 50-70 CF. The carbine has t

Estimate: $1000 - 2000 This lot contains a large 44 inch long all brass crowbar marked "SOD USA", Savanna Ordnance depot, a framed and ...

Estimate: $1200 - 1800 27 3/4 inch curved single fuller blade, with gold accented engravings in niter blue fields on each side. Gilt finished hilt

Estimate: $1100 - 1600 31 3/4 inch straight blade, with the M.C. Lilley address etched on the left ricasso, floral etching on each side, eagle with

Estimate: $950 - 1600 32 1/4 inch double fuller blade, with "IRON:PROOF" on the spine, the Clauberg (Solingen) makers mark on the left ...

Estimate: $1000 - 1500 31 3/4 inch double fuller blade, with etched decoration on each side and the New York address on the left ricasso. Silver fi

Estimate: $1000 - 1500 31 inch double edge blade with central fuller, decorated with acid etched leafy scroll and armament designs. Silver finished

Estimate: $850 - 1200 Deluxe U.S. Model 1902 "Saber For All Officers" with non-regulation gold-plated hilt suspension bands and drag. A...

Estimate: $7500 - 12000 Manufactured circa 1865 to 1873 with a total production of approximately 18,000. These revolvers were originally manufactur

Estimate: $2250 - 3500 This example of a Remington New Model Army percussion revolver features a silver finish on the custom engraved barrel and fr

Estimate: $2000 - 3000 This is an example of a Butterfield percussion revolver that was manufactured by Jesse Butterfield of Philadelphia, Pennsylv

Estimate: $2500 - 3750 Manufactured in the early 1860s by Union Knife Company, Naugatuck, Ct. for the inventor John Lindsay with only about 100 man

Estimate: $1400 - 2250 Manufactured from 1863 to 1875. The revolver has an 8 inch barrel and blue finish, casehardened hammer, fire blue trigger an

Estimate: $2750 - 4250 The revolver has an 8 inch barrel and blue finish, casehardened hammer, fire blue trigger and brass trigger guard. The top b

Estimate: $1800 - 2750 Manufactured between 1863 and 1865 with this example having U.S. inspection markings. Standard "STARR. ARMS. CO. NEW....

Estimate: $3750 - 5500 Manufactured between 1865 and 1866 with a total production of approximately 5,000. The top of the barrel ahead of the rear s

Estimate: $3000 - 4500 This is a late production Civil War New Model 1863 Carbine made without a patch box. Manufactured from 1863 to 1865, this ca

Estimate: $1800 - 2750 This is an example of a very early, all brass mounted Sharps Model 1859 percussion carbine manufactured from 1859 to 1866 wi

Estimate: $1600 - 2500 Manufactured circa 1858 to 1863, this carbine is fitted with a sling bar, ring, Lawrence folding rear sight graduated to 800

Estimate: $2250 - 3500 Manufactured circa 1862-1865. The lock is dated 1863 behind the hammer, has the Eagle/Shield over "U.S." and &qu...

Estimate: $2500 - 3750 This is an example of a U.S. Army Spencer Model 1860 rifle manufactured circa 1863-1864 that was Arsenal refurbished immedia

Estimate: $1400 - 2250 This is an example of one of 15,000 Model 1861 Rifle-Muskets that Whitney delivered to the U.S. government. The lock is date

Estimate: $1400 - 2250 Manufactured by A.H. Waters Armory circa 1859 to early 1860s with a total quantity around 1,500 U.S. plus 3,000 Russian cont

Estimate: $1200 - 1800 Manufactured from 1844 to 1855, the 1842 Musket was a primary infantry arm for both Union and Confederate forces in the open

Estimate: $900 - 1400 29 inch double edge blade, with etching on each side, Ames makers marks on the left side, and "Presented to Lieut. Cha...

Estimate: $1200 - 1700 30 1/4 inch curved single fuller blade, with gold accented engravings in niter blue fields on each side. Silver finished hil

Estimate: $900 - 1400 31 inch double fuller blade, with the Clauberg logo on the left ricasso, Schuyler, Hartley & Graham's New York addr...

Estimate: $850 - 1200 31 3/4 inch straight blade, with the Weyersburg stamp partially visible on the right ricasso and decorative etched panels on

Estimate: $1100 - 1600 31 1/2 inch double fuller blade, with the West Chelmsford address on the left side above the ricasso, and etched decorations

Estimate: $950 - 1500 Civil War Model 1860 Cutlass manufactured by the Ames Sword Co., Chicopee, Massachusetts, in 1862. The cutlass has the distin

Estimate: $1000 - 1500 1) U.S. L.F. & C. 1913 pattern sword, 35 inch straight single fuller blade, with 1919 date on the left ricasso, U.S. m...

Estimate: $1600 - 2250 Approximately 20,000 of these unique revolvers were manufactured from 1861 to 1865. Approximately 12,000 were purchased unde

Estimate: $1600 - 2500 Manufactured from 1863 to 1875. The revolver has an 8 inch barrel and blue finish, casehardened hammer, fire blue trigger an

Estimate: $2250 - 3500 This is one of the estimated 1,000 Navy Model 1861 Signal Pistols manufactured at the U.S. Navy Yard, Washington, D.C. The d

Estimate: $1000 - 1500 Manufactured between 1863 and 1865. Soldered replacement brass blade front sight and hammer groove rear sight. Standard &q...

Estimate: $900 - 1300 This is an example of one of the approximately 5,800 percussion revolvers manufactured circa 1863-65 by Rogers & Spence...

Estimate: $1200 - 1800 Manufactured from 1861 to 1862 this is an improvement over Allen & Wheelock's sidehammer revolvers. The left barre...

Estimate: $1300 - 1900 Manufactured from 1863 to 1875. The revolver has the standard three line New Model barrel marking on the top barrel flat. Si

Estimate: $1000 - 1500 Manufactured from 1859 to 1860 with an estimated 1,000 manufactured. The top barrel flat has the standard two line Beals pat

Estimate: $1200 - 1800 This is an example of Civil War era left hand holster for a Colt Model 1860 revolver manufactured 1863 to 1865, maker unknow

Estimate: $850 - 1300 This is a 3rd Version with the iron frame and trigger guard that has been converted to 32 RF cartridge. The top barrel flat i

Estimate: $900 - 1400 A) Manufactured from 1859 to 1862 this is a First Model with the button head type cylinder pin secured by a screw entering th

Estimate: $850 - 1300 1) Powder horn, approximately 6 1/2 inches long with wooden stopped and leather strap, 2) Powder flask, approximately 4 3/4 i

Estimate: $1600 - 2250 This is a solid example of one of the Model 1862 Sharps & Hankins carbines purchased by the U.S. Navy between 1862-186...

Estimate: $1800 - 2750 This is an example of a Sharps Model 1863 Carbine that was either arsenal or Sharps Rifle Company converted to .50-70 CF met

Estimate: $1800 - 2750 This is an example of a Second Model (also known as the "Model 1863"), Maynard carbine that was manufactured cir...

Estimate: $2250 - 3250 Manufactured circa 1867 with a total production of approximately 3,000. This carbine as the six groove 50 caliber barrel and

Estimate: $1300 - 1900 The state of New York purchased about 15,000 rolling block rifles and carbines from Remington circa 1872. These can be disti

Estimate: $1400 - 2250 The Smith Carbine was manufactured by the Massachusetts Arms Co., Chicopee Falls, Massachusetts and was one of the most impo

Estimate: $1400 - 2250 The Smith Carbine was manufactured by the Massachusetts Arms Co., Chicopee Falls, Massachusetts and was one of the most impo

Estimate: $2750 - 4250 This is an example of one of the 11,000 Spencer Carbines overhauled by Springfield Armory between 1867 and 1874. Springfield

Estimate: $1600 - 2500 This is an example of one of the Civil War Sharps New Model Carbines that were converted post Civil War to fire the .50-70 G

Estimate: $1600 - 2250 This is a solid example of a First Type Joslyn Model 1862 Civil War Carbine. Blade front and 3-leaf rear sights, with &quo...

Estimate: $1200 - 1800 This is an example of one of approximately 20,600 percussion carbines produced by Starr Arms Company of Yonkers, New York ci

Estimate: $1100 - 1600 1) Spencer Cavalry cartridge box with 20 round block and front pouch, "SPROULLS MEEKS & Co" marked on the in...

Estimate: $10000 - 20000 This is an extraordinary example of a Colt Third Model 1851 Navy revolver that was manufactured in 1856. The revolver has

Estimate: $4500 - 6500 14 1/4 inches wide, 6 1/4 inches deep and 2 inches tall, this walnut case is for a small trigger guard Colt Model 1851 percu

Estimate: $2500 - 4500 This open toe, open top holster was manufactured by Main & Winchester of San Francisco, California. The plain brown le...

Estimate: $850 - 1400 This an example of a Colt powder flask for the 1851 and 1861 Navy Model percussion revolver. The flask has a one sided relief

Estimate: $50000 - 75000 Accompanied by a 11 page R.L. Wilson letter which authenticates this revolver and elaborates on the historic significance

Estimate: $14000 - 18000 This is an excellent original example of a Deluxe Colt Sporting rifle that was manufactured somewhere between 1857 and 186

Estimate: $1300 - 2000 Colt Second Type .44 caliber bullet mold for revolving rifles and 3rd Model Dragoon revolvers. The iron double cavity mold f

Estimate: $16000 - 22500 Manufactured in 1866. The top barrel flat is marked with the one-line New York U.S. America address, the left side of the

Estimate: $30000 - 45000 A) Manufactured in 1868, these matching Colt Model 1862's Police revolvers feature factory carved ebony grips with t...

Estimate: $14000 - 22500 This is an original example of a highly sought after U.S. inspected four screw frame variant Colt 3rd Model Dragoon Revolv

Estimate: $5000 - 7500 This is an example of a Model 1851 Late Navy-Navy Revolver. The serial number range of the Late Navy-Navies (89,000-91,000)

Estimate: $6500 - 9500 Manufactured 1856-1864. Part of a line of revolver-type long arms which enjoyed some success, but in many ways was ahead of