Premiere Firearms Auction

A) Produced in December of 1943. Blade front and adjustable peep rear sights with "BATTLE RANGE" marked elevation drum and locking bar. Un...

This is an example of Remington Model 1903 -A4 sniper rifle. The barrel is marked "R A / ordnance bomb / 8-43", the receiver is correctly ...

This is an example of a Remington Model 1917 rifle with Remington Model 1917 Bayonet, scabbard and Model 1907 russet leather sling. The rifle has the

Late post-War H&R M1 using some early production parts, Harrington & Richardson barrel dated December 1951, with a blade front sight, import...

Manufactured in 1943 and subsequently Arsenal rebuilt . The receiver is marked "U.S. RIFLE, CAL. 30 M1, SPRINGFIELD ARMORY" over the seri...

This is the long barrel version of the Model 11 that was used by the U.S. military for aerial gunnery practice. It has the military blue finish, sing

Produced in March of 1943. Blade front and adjustable peep rear sights with "BME" marked windage drum. Fitted with a Springfield "11-...

Mixed WWII M1 Garand made in 1944. Equipped with blade front and adjustable rear sights, "DRC" marked windage drum, Springfield parts, bol...

A) Dated "8-54" on the LMR barrel, with a fixed blade front sight marked "NM" and "NM" peep rear sight with "DRC&...

A) Ramp blade front and Redfield adjustable peep rear sights, "MILITARY FINISH" on the barrel and "U.S. PROPERTY" on the barrel ...

This Winchester Model 1917 rifle was subsequently arsenal rebuilt and reissued for WWII. The Winchester proofed barrel is dated "11-17", w...

Blade front and adjustable rear sights, with "BME" marked windage knob, Springfield bolt, hammer, safety and trigger housing, Winchester o...

Post-war production. Blade and adjustable peep sight, with "DRC" marked windage knob. Import marked Springfield barrel dated "1 54&qu...

A) Produced in August of 1944. Blade front and adjustable peep rear sights with "BME" marked windage drum. Fitted with an import marked Sp...

A) Blade front and ladder rear sights, with a Winchester barrel dated "3-19", "E" marked small parts and a smooth straight grip ...

This is an nice example of a late WWII M1Carbine that was produced by Inland which has been fitted with the M1A1 Paratrooper carbine folding stock. T

Oversized WWII era cut-away training model of the Model 1919 Machine Gun with an overall length approximately 76 inches. The display is made of alumin

This is an excellent example of a Remington Model 03-A3 rifle that was, according to consignor notes, owned by a Remington factory guard in New York d

Manufactured between 1900 and 1903, this carbine was subsequently used in the 1997 television miniseries "Rough Riders" starring Tom Beren...

The barrel is marked "RA / flaming ordnance bomb / 12-43", with adjustable receiver peep sight and a blade front sight with detachable hoo...

Developed by the Dellenbarger Machine Company of New York City for use with 60mm, 80mm and 4.2" mortars, this device allows for crew training w...

Introduced in 2005, this revolver is built on the newest X-size stainless steel frame. It is quipped with a hi-viz front sight, an adjustable rear sig

A) The Model 27-8 is the re-introduced, current production, new Registered Magnum manufactured by the Smith & Wesson Performance Center and comm...

A) Introduced in 2005 as the Thunder Ranch Special. Standard markings, pinned half-moon front and groove rear sights, diamond checkered S&W meda...

A) Introduced in 1989. Standard markings, pinned blade front sight, adjustable rear sight, and textured S&W finger grooved grip. Matte stainless...

A) Ramp blade front and adjustable rear sight, with a barrel marked "44 MAGNUM" on the left, and "Mountain Gun" on the right. T...

Reproduction of the Colt Texas Paterson with the top of the barrel marked "Patent Arms M'g Co. Paterson, N.J.-Colt's Pt." and the ...

Produced in Fulton Michigan and chambered for the 45-70 Government cartridge. Blade front and notch rear sights, with an ejector mounted on the barrel

Manufactured from 1970-1973. Standard barrel and frame markings with 95% of the metal surfaces featuring a scroll engraving on a punch dot background

This Navy retirement pistol features gold etching on both sides of the slide with gold wire border. The left reads ""Don't Give Up The...

This modern reproduction has standard features with the correct markings of the era, unmarked blue magazine and checkered walnut grips. Complete with

Manufactured circa 1974. Blade front sight and adjustable rear sight, with standard markings. Over 90% of the metal surfaces feature a scroll engravin

This is one of 100 limited Edition International Handgun Metallic Silhouette Association revolvers. The left side of the full length ejector shroud is

Standard marking and features, with the standard presentation case with 3 of the 7 nickel plated dummy rounds and key. BBL: 5 inch round Stock:

This pistol features rear slide serrations, blade front and fix rear sights. The left side of the slide is roll-stamped with: "PATENTED/ APR 2...

Features Colt factory "B" engraving, standard features and fitted with smooth walnut grips with gold Rampant Colt medallions on the top of...

Features standard one line barrel address on top with the left side marked "COLT SINGLE ACTION ARMY .357 MAGNUM". The left side of the fra...

Standard markings and features of the black powder frame revolver with smooth ivory grips that have Rampant Colt medallions affixed at the top of each

Standard markings and features of the black powder frame revolver with smooth ivory grips. Complete with papers, hanging tag and Colt "wood gra...

Fixed ramp front sight with adjustable rear sight. Flattop frame is casehardened while all other metal surfaces are blue finished. Standard one line a

Features standard one line barrel address on top with the left side marked "COLT SINGLE ACTION ARMY .45", the left side of the frame is ma...

The barrel marked "COLT'S PT FA MFG CO. HARTFORD USA" on top with "COLT SINGLE ACTION ARMY .45" on the left side. The black ...

Standard short two line address on top of the barrel, "COLT SHERIFFS MODEL" on the left side and "COLT SAA .44-40" on the right ...

Attractive ivy scrollwork is gold embossed on barrel, cylinder, and backstrap. Two ivy clusters surround Colt emblem on left of barrel with similar c

Fixed sights with the left side of barrel roll marked with "-125th ANNIVERSARY - S.A.A. MODEL .45 CAL.-". The hammer, ejector button, cyli...

Standard markings and features of the Colonel Samuel Colt Sesquicentennial Single Action Army. Complete with case, a wooden ammunition block with twel

One of the revolvers in the Lawman Series commemorating Wild Bill Hickok. The right side of the barrel is marked "LAWMAN SERIES-WILD BILL HICKO...

A) Standard markings and features of the Nevada Centennial Single Action Army revolver. Complete with a glass topped wood display case with red velvet

Manufactured in 1959 with standard markings. Matching numbers, checkered black grips with the Rampant Colt embossed on the top of each panel. BBL: 7

A) Standard commemorative markings and features of the Bicentennial Single Action Army Revolver. Complete In three drawer chest with the original book

Produced by the Custom Shop as a factory cutaway revolver, numbered as a post-1985 Third Generation Single Action. Markings and features are otherwise

Produced in 1977, with factory Class "A" engraving. Standard markings, with panels of scroll and punch dot engraving added to either side ...

Standard short two line address on top of the barrel, "COLT SHERIFFS MODEL" on the left side and "COLT S.A.A .44 CAL." on the ri...

Manufactured in 1959. The top of the barrel is marked with the one line address, "COLT SINGLE ACTION ARMY .38 SPECIAL" on the left side an...

Manufactured in 1956, the first year of production for the Second Generation Single Action Army. Fixed sights, with the one line Hartford address on t

This Single Action Army revolver commemorates milepost 238 of the limited edition, 802 revolvers made for each milepost of the Trans-Alaska Pipeline.

A) Standard markings and features of the Winchester/Colt Commemorative. Complete with commemorative carbine/revolver hardwood case, factory letter and

One of 3,000 commemorative revolvers made in 1979. High ramped front sight and adjustable rear target sight. The top of the barrel is marked with the

Only about 3,900 of these Buntline Specials were produced with this one being manufactured in 1958. This example has the standard one-line block lett

This Colt Custom Shop Single Action Army revolver features an all nickel finish, standard blade and frame notch rear sights and a factory elongated g

Features blade front and notch rear sights. The barrel is marked with the one line Hartford address on top and the caliber markings on the left side.

Standard one line address on top of the barrel, left side marked "COLT SINGLE ACTION ARMY .357 MAGNUM", two line, three patent dates on th...

A) Standard Alamo tribute markings and features, with tribute case and second revolver. BBL: 4-3/4 inch round Stock: Gauge: 22 LR Finish: blu

Produced after 1971. Fitted with a Bo-Mar sight rib with adjustable rear sight and Patridge front mounted on a 1 1/2" front sight extension. St...

Manufactured between 1970 and 1976. Blade front and Micro adjustable rear sights, with standard markings, polished sides, matte curves, serrated short

Features fixed sights, standard markings, serrated arched mainspring housing and checkered grips with Rampant Colt medallions. Complete with Colt &q...

Fixed sights and standard markings, with collet style bushing, serrated short trigger, arched alloy mainspring housing, and checkered grips with Colt

A) Produced in 1968. Standard configuration with adjustable trigger, Patridge front sight, serrated front strap and serrated flat mainspring housing.

This pistol features a blue finish with polished flat surfaces, blade front, fixed notch rear sights and standard markings. Fitted with checkered grip

A) Standard markings, three dot sights, ambidextrous safety, round serrated hammer and adjustable trigger. The flat surfaces are polished with the rem

Features standard one line barrel address on top with the left side marked "COLT SINGLE ACTION ARMY .357 MAGNUM", the left side of the fra...

The barrel marked "COLT'S PT FA MFG CO. HARTFORD USA" on top with "COLT FRONTIER SIX SHOOTER" on the left side. The black p...

Standard markings, no ejector rod and smooth ivory grips with Rampant Colt medallions. Complete with the original Colt maroon box numbered to the gun,

Produced in the early 1980's. Fixed ramp front sight with adjustable rear sight. Flattop frame is casehardened while all other metal surfaces ar...

A) Featuring a blade front sight with an adjustable rear sight on a flattop frame, fluted cylinder and black checkered Rampant Colt/Federal Eagle grip

Features standard one line Hartford address on top of the barrel with the left side marked "COLT SINGLE ACTION ARMY .45". The left side of...

Produced after 1974, model P4840. Flat top adjustable rear sight, ramped blade front sight. Two line patent dates and Rampant Colt stamped on the left

Features standard one line barrel address on top with the left side marked "COLT SINGLE ACTION ARMY .45", the left side of the frame is ma...

Produced in 1970, shortly before the introduction of the Series 70 alterations. Partridge blade front sight and an adjustable Elliason rear sight, wit

Manufactured between 1970 and 1983. White Patridge front and adjustable Elliason rear sights on the serrated rib, with the standard three line marking

Produced in 1968. Fixed sights and standard markings, serrated hammer, trigger, slide catch, grip safety and arched mainspring housing, with long grip

Manufactured in 1971. Patridge front and adjustable Elliason rear sights on the matte rib, with the standard slide markings, collet bushing, serrated

The curved surfaces have a Matte blue finish with the flat surfaces polished. The pistol features a blade front sight with a dovetailed notch rear and

Produced from 1980-83. Standard markings and features with checkered double diamond fancy hardwood grips. Polished stainless steel on the flat surface

Left side of slide is marked "COLT GOLD CUP/TROPHY", right side is marked "COLT GOLD CUP TROPHY MODEL." Colt address stamped on ...

A) Features a polished slide with floral and gold etching. The left side shows a gold etched Rampant Colt while the right side features a gold etched

Features fixed sights, with the one line address and caliber markings on the barrel, two line patent markings on the frame and smooth ivory grips with

Made in 1980, the first year of production for the 3rd Generation Sheriffs Model. Blade front and frame notch rear sights, with the short two-line add

Celebrating 150 years of Colt craftsmanship, this Buntline revolver features floral scroll engraving with a punch dot background on the sides of the b

Limited edition commemorative issued in 1973 for the 100th anniversary of the Frontier Six Shooter. Features a fixed blade front sight, bull's-e...

Features the standard one line address on top of the barrel, left side marked COLT SINGLE ACTION ARMY .45", two line, three patent dates on the...

Produced in the early 1980's. Fixed ramp front sight with adjustable rear sight. Flattop frame is casehardened while all other metal surfaces ...

Standard markings and features, with Roy Rogers "book" case and sleeve. BBL: 4 3/4 inch round Stock: Gauge: 45 Finish: blue Gri...

Fixed blade front sight. Left side of barrel is marked "-125th ANNIVERSARY- S.A.A. MODEL .45 CAL.-". Blue barrel cylinder and frame. Hamm...

Introduced in 1998, this model is a replica of the SAA and features a blue finish barrel, cylinder, and grip straps, and casehardened frame. The top

Manufactured in 1927 featuring front elevation adjustable and rear windage adjustable sights, "straight taper" barrel marked with the two...

Manufactured in 1954. Pinned ramped blade front sight and adjustable rear sight, with the left side of the barrel marked with the two line Hartford ad

Manufactured in 1968. Features a fixed ramped front sight, adjustable Elliason rear sight. The left side of the frame is marked with the Rampant Colt

Manufactured in 1954. Pinned ramped blade front sight and adjustable rear sight, with the left side of the barrel marked with the two line Hartford ad

Manufactured in 1950. Pinned ramped blade front sight and adjustable rear sight, with the left side of the barrel marked with the two line Hartford ad