RR Auction: Space Exploration

Crew kit case assembly issued to veteran Space Shuttle astronaut Norm Thagard, who became the first American to fly to space on board a Russian vehicl

Lot of 14 items signed in black felt tip by veteran Space Shuttle astronaut Bob Crippen, consisting of four color satin-finish 8 x 10 photos, four Spa

Jack Lousma's flown embroidered STS-3 crew patch, measuring 4è in diameter, affixed to a light blue 10 x 8 presentation sheet signed

Flown ‰Û÷Specialist Seat Egress‰Ûª cue card and embroidered crew patch that were flown into low Eart

Three photos signed by Story Musgrave: an official color 10 x 8 NASA lithograph of the Hubble Space Telescope, signed in black felt tip (reverse bears

Signed book: The NASA Northrop T-38: Photographic Art from an Astronaut Pilot. First edition. Published by Lannistoria in 2009. Hardcover with dust ja

Embroidered crew patch worn by Mission Specialist Don Peterson on his Launch and Entry Suit during the STS-6 mission from April 4‰Û

Two Shuttle-era firing room indicator panels, measuring 6.75è x 1è x 2è, with Roto-Tellite labels o

Two commemorative covers with color cachets honoring the Space Shuttle Challenger and STS missions 8 and 11 (41-B), postmarked on either the mission l

Three items flown on a Space Shuttle flight‰ÛÓan embroidered RCA Astro-Electronics patch, 3.75 x 7.5, carried aboard the Spac

Three substantial early reports associated with Space Shuttle propulsion, including: a 560-page document entitled "OFT-1 Preliminary Preflight ...

Lot of four cable guide assemblies designed for use during the Space Shuttle program. Each assembly measures 2è x 3è

Insulation block from the Space Shuttle Columbia (OV-102) orbiter, 7è x 2.75è x .75è, with parts la

Space Shuttle SRB circuit board, 6.25è x 4è x .5è, stamp-dated to March 28, 1979, with serial code

Available to US bidders only. An unusually shaped flown insulation assembly used in the wings of the Space Shuttle to protect the aluminum structure f

Limited edition acrylic display featuring small insulation fragments from each Space Shuttle Orbiter attested to as flown by Florian Noller: Columbia

Large gold-colored Space Shuttle Orbiter fibrous bulk insulation blanket, measuring approximately 30.5 x 15 x 1.5, stamped with part numbers,

Uncommon spiral-bound ‰ÛÏOrbiter Wire Calculator‰Û booklet from the Space Shuttle program, 8.5 x 11

Pair of heavy-duty nylon parachute risers designed to safely lower reusable Space Shuttle Solid Rocket Boosters (SRB). The pieces measure 17.5

Fascinating official "Space Transportation System Training Data" manual for the Space Shuttle Main Engine (SSME), entitled "SSME Orie...

Available to US bidders only. Thick black-and-white tile designed for use on the Space Shuttle Orbiter Thermal Protection System, measuring 6è

Available to US bidders only. Black-and-white tile designed for use on the Space Shuttle Orbiter Thermal Protection System, measuring 4è

Softcover report official NASA report entitled "NASA Space Shuttle Technology Conference: Dynamics and Aeroelasticity; Structures and Materials...

Attested to as flown by Astrotech‰ÛÓa piece of insulation material carried on the Space Shuttle Discovery Orbiter as part of

Official Manned Flight Awareness program celebrating the 10th anniversary of STS-1 in 1991, 8 x 8, 28 pages, signed and inscribed in the rear cover in

Very rare embroidered patch for the COLBERT, a new treadmill delivered to the International Space Station by the STS-29 mission, 4è i

Pair of lightweight Rocky 911 Series Launch Entry Suit (LES) boots issued as flight-ready for a journey to the International Space Station (ISS) aboar

Pair of lightweight Rocky 911 Series Launch Entry Suit (LES) boots issued as flight-ready for a journey to the International Space Station (ISS) aboar

Pair of lightweight Rocky 911 Series Launch Entry Suit (LES) boots issued as flight-ready for a journey to the International Space Station (ISS) aboar

Pair of lightweight Rocky 911 Series Launch Entry Suit (LES) boots issued as flight-ready for a journey to the International Space Station (ISS) aboar

Cargo bay identification card flown on the STS-135 mission, the final mission of the American Space Shuttle program. The green 5.25 x 4 card is marked

Flown fabric National Aeronautics and Space Administration (NASA) flag, 5.5 x 3.75, carried for four days during the STS-26 mission. The flag is affix

Group of seven technical reports and documents associated with STS-26, the Space Shuttle's 'Return to Flight' after the Challenger disas...

American flag and crew patch flown into low Earth orbit during the STS-29 mission, both of which are affixed to a 10.75 x 13.75 certificate presented

Color glossy 12.75 x 16.75 composite photo of the STS-29 crew and various images from their four-day mission, featuring a flown embroidered mission pa

Unflown sterling silver STS-29 Robbins medal, approximately 1.5è in diameter, with a raised design on the face featuring the mission

Souvenir card produced by BA Commercial Corporation, 8.5 x 3.5, containing a 1.5 x 1 swatch of woven ceramic fabric as used to protect the Space Shutt

Flown American flag, 5.75 x 4.5, that was carried aboard the Space Shuttle Discovery during its April 1990 mission that launched the Hubble telescope.

Original NASA 11 x 8.5 vehicle permit for the launch of the ill-fated STS-51-L mission at Kennedy Space Center Launch Complex 39B on January 28, 1986,

Limited edition plaque containing a 1.75" vial of flown polystyrene spheres, the "first space product," a material manufactured in sp...

Color glossy 10 x 12.25 composite photo of four images from the STS‰ÛÒ6 mission, featuring a flown embroidered mission patch

Flown flag commemorating the 25th anniversary of the Apollo 11 mission, 5.25 x 3, carried aboard the Space Shuttle Columbia during the STS-65 mission

Flown John F. Kennedy Space Center Fire Department patch, 4è in diameter, which was carried into low Earth orbit for eight days durin

Two Space Shuttle items inscribed as being flown‰ÛÓa substantial 32è x 7.25è piece of paylo

Uncommon color 10 x 8 NASA lithograph of the crew of STS-95, the historic return to space for Senator John Glenn, signed in black felt tip by John Gle

Flown two-sided checklist page carried on board STS-6, 10.5 x 8, dated March 28, 1983, signed and flight-certified on one side in blue ballpoint, &q...

FDC with a silk cachet honoring women in space, signed in ink by six pioneering female astronauts: Sally Ride, Judy Resnik, Rhea Seddon, Anna Lee Fish

Program affiliation undetermined (may be Space Shuttle). Pyrotechnically actuated bolt, measuring approximately 7.5" x 4" x 4", weigh...

Interesting inertial guidance system developed by Honeywell and used at Johnson Space Center, possibly for testing as a candidate system for the Space

Space Shuttle EVA Disposable Urine Collection Device (UCD), manufactured by Boeing Aerospace, with an identification patch sewn to the device, reading

Space Shuttle Enhanced Life Preserver Unit (ELPU) developed by Mustang Survival/Meta Research to address the in-water mobility deficiency experienced

Arriflex 16mm film magazine flown on STS-57, STS-63, and other flights as per NASA label on bag. It measures 8.75è x 7è

Flown Space Shuttle General Purpose Computer (GPC) built by IBM, comprised of two units: the Central Processing Unit (CPU) and the Input/Output Proces

Solar array carrier isolator intended for application in the Space Shuttle Payload Bay as part of the cradle assembly that retained the Hubble Space T

Space Shuttle Satellite Extension and Deployment Arm, measuring 112.5" (9.3å«) in length, with one end terminating in a hard rubber kn

Space Shuttle seat cushion assembly, measuring 15.5è x 14.5è x 1.5è, with identification tag sewn o

Space Shuttle-era rack-mountable centrifuge for a Low Gravity Stress Analysis Experiment at Johnson Space Center, measuring 19è

Attested to as flown by Astrotech‰ÛÓSpacehab module storage locker, 18.5 x 11.5 x 25.75, with the McDonnell Douglas inventory

Both halves of a frangible nut from the External Tank (ET) umbilical plate of Space Shuttle Discovery flown on STS-103, measuring approximately 1.75...

Flown nose landing gear extension pyrotechnic thruster utilized by the Space Shuttle Discovery on STS-103, measuring approximately 12‰

Adjustable Protective Mitten flown to the International Space Station aboard the Space Shuttle Endeavour during the STS-123 mission. The mitten is sea

Sony DSR-V10 DVCAM player/recorder presumed flown on the Orbiter Atlantis for the last mission of the Space Shuttle Program, STS-135. Affectionately k

Thermal tile block, circa 1991, measuring 13è x 13è x 5è, sealed in its original packaging with aff

Flown Space Shuttle Orbiter Aft Fuselage Gas Sampling System (OAFGSS) bottle assembly, measuring 10è x 3.5è x 2

Protective cover for a Space Shuttle Heads Up Display, measuring 6è x 12è, marked on the lower cloth panel: "HUD Cov

Space Shuttle Orbiter to Ground Helium Supply quick disconnect assembly, measuring approximately 9.5è x 3.75è x 3.75

Space Shuttle Orbiter umbilical connector plate that was part of the spacecraft's Umbilical Separation System and provided compartmentation betw...

A sample Purge Kit Pouch assembly designed for Space Shuttle use, 10è x 10è x 2è, made of Beta clot

Separation nut and bolt affiliated with the X-38 Crew Return Vehicle (CRV), evidently a modified variant of the Space Shuttle Solid Rocket Booster Par

Limited edition Astronaut Knife M-1 Model 1966 manufactured by W. R. Case and Sons. The machete-style knife measures 16.5è in length

A stainless steel fuel filter, 5.25è in length and 1.5è in diameter, with end taped and a parts label stamped on its

Uncommon Remington-Rand Model 100 electric adding machine, featuring a NASA property label on the front. The machine measures 13.5è x

Shimmering silver thermal protective fire jacket from the NASA Langley Research Center, tagged as "Fyrepel Model 0-35/C, Size 42-44, Slvs. 34&#...

Mechanical integrator built by Keuffel & Esser Co. and used at the NASA Langley Research Center, housed in its original 30.5è x 6.5

Large NASA telemetry encoder/decoder demonstration unit housed in two large green cases, measuring 21è x 19è x 11[x=

Display plaque featuring two varieties of an "electronic timer for spacecraft timing and recording operations," measuring 12è x...

The Official American Space Flight Silver Anniversary Medals set, issued by the National Space Society and minted by the Franklin Mint, containing a t

Commemorative cover with a cachet honoring the International Astronautical Congress held in Athens, Greece, in September 1965, signed in ink by Voskho

Commemorative cover with a cachet honoring the International Astronautical Congress held in Madrid, Spain, in October 1966, signed in ink by Frederica

Limited edition artifact display prepared by Space Legacies, which they attest contains three flown material swatches from a manned Mercury, Gemini, a

Vintage NASA lunch tray with a 'meatball' logo in the upper left, 18 x 14, manufactured by Camtray, Cambro Manufacturing Co., Huntington Bea...

Scarce promotional metal toy space ship rocket produced by the SyFy channel for their 2014 science-fiction miniseries Ascension. The rocket stands 15

Official color 8 x 10 NASA lithograph of McNair in his blue flight suit, signed and inscribed in blue felt tip, "Best wishes, Ron McNair."...

Official color 8 x 10 NASA lithograph of Onizuka in his blue flight suit, signed and inscribed in black felt tip, "To Sylvia, with best wishes

Official color 8 x 10 NASA lithograph of Resnik in her blue flight suit, signed and inscribed in black felt tip, "Best wishes to Sylvia! Judy R...

Official color 8 x 10 NASA lithograph of Dick Scobee wearing his blue flight suit photo, signed and inscribed in black felt tip "Sylvia, very b...

Commemorative cover with a stamped cachet honoring a "Space Shuttle Mission Simulation Training Test" at the Lyndon B. Johnson Space Cente...

Flown Russian Poljot wrist watch carried to the International Space Station aboard Soyuz TMA-4 for Expedition 9. The watch was carried by Gennady Pada

Collection of 29 flown plastic cargo bay cards that were carried to the International Space Station, each 5.25 x 4, with the majority identified by th

iRED (Interim Resistance Exercise Device) squat support bar attested as flown and used on the International Space Station, measuring 33è

Group of 11 boxes of Prime Square Center Hotel toothpicks, with each box containing 800 white birch toothpicks, which amounts to a total of 8800. The

Mockup or Training Berkut Voskhod-era Cosmonaut backpack, 12.75è x 20è x 4.25, weighing approximately 19 pounds, con

An interesting cosmonaut pilot survival kit contained within an olive drab canvas bag, stamped on the front with part numbers, "HA3-7, 8904937....

Group lot of four scarce Russian commemorative wrist watches from the 1980s, all of which feature elaborate face designs honoring Russian space achiev

Signed book: _£„â„Û__ _¼__„___ü„à_µ„

Vintage glossy 4.25 x 6 head-and-shoulders photo of Lev Dyomin in uniform, flown on Soyuz 15 in August 1974 with on-board cancellation stamp, signed i

Desirable official KNIGA first day cover honoring 'Cosmonautics Day' on April 12, 1965, signed in blue ballpoint by Yuri Gagarin. In fine co...

Satin-finish 8 x 10 photo of Alexei Leonov during his historic first space walk, signed in black felt tip by the legendary cosmonaut, who adds "...

International edition color 32 x 17.75 print of an Alexei Leonov painting entitled 'Seagull,' depicting Valentina Tereshkova in space with n...

Satin-finish 8 x 10 photo of the Apollo-Soyuz Test Project cosmonauts seated with NASA astronaut Vance Brand during the mission, signed in black felt