The Premiere Firearms Auction of the Year.

Second pattern magazine with the stamped, folding winding lever. The top and bottom of the magazine is marked with the maker's code "B/N&qu...

Fixed sights, with a chamber date of "1918" and "crown / ERFURT" on the toggle. Three "crown/ gothic letter" proofs, &...

This is a nice example of the standard four inch barrel, German Luger pistol as used during WWI and WWII. It has the standard three "crown/scr...

Produced between 1924 and 1940. Blade and tangent sights, with the slotted rear backstrap for shoulder stock (absent). Standard slide markings, with t

A) Standard two line slide marking, with eagle/WaA77, eagle firing and eagle/623 proofs. The left side of the frame has an eagle/WaA77 proof. The slid

A) The left side of the slide has only the caliber marking (CAL. 7,65) and the right side is blank. Commercial eagle/N proofs appear on the frame, sli

A) The left side of the slide is marked "P. BERETTA-CAL. 7.65-BREVETTATA / GARDONE V.T. 1944" (correctly without the Italian Fascist date)...

A) The left side of the slide has only the caliber marking (CAL. 7,65) and the right side is blank. Commercial eagle/N proofs appear on the frame, sli

This is an example of a restored WWII German turret type sniper rifle manufactured by the Mauser factory that has been fitted with a Hensoldt sniper s

Produced following the fall of Czechoslovakia, based on the Czech Model 24 Rifle. Blade and tangent sights, with "eagle/ A80" proofs on th...

Produced in 1944 in Czechoslovakia by Waffenwerke Brunn. Hooded blade and tangent sights, with "dot/1" shield, "HG" and "ea...

Designed as a drop-in kit for the K98 rifle, only requiring the removal of the floor plate, magazine spring, follower and bolt. The barrel, receiver a

Hooded blade and tangent sights, with an "eagle/63" proof over the makers mark. Milled components, with "GERMANY" on the trigger...

Blade front and tangent rear sights, with "eagle/ 359" proofs on the barrel and receiver ring and "droop wing eagle/ 214" proofs...

This is an excellent example of a very late WWII production K98 rifle. This rifle was manufactured at the BRNO factory late in WWII while under contro

Blade and tangent sights, with caliber marking on barrel, "eagle/ N" on the barrel and receiver, and the maker and model markings on the r...

This is an example of a scarce pre WWII German K98 rifle that was manufactured by the Erfurt Arsenal. The top of the receiver ring is marked "S...

Fixed sights and smooth backstrap, two line markings on the left side of the slide, matching numbers on the barrel, slide and frame, with crossed penn

A) This is a nice example of a Walther Mod. PPK pistol with RZM marking on the left side of the slide between the factory logo and the serrations. Th

A) Late war production, made without the takedown catch. Fixed sights and standard slide markings, with "77" and "WaA625" proofs...

A) Manufactured circa 1943, this G prefixed serial numbered Model 1935 pistol has a slide without a legend, a common feature for Model 1935s in this s

The top of the receiver is marked with the large Persian Crest which depicts the Persian Crown at the top, a standing lion in the middle holding a Sci

An exceptional near mint example of a prewar Mauser contract rifle manufactured for the government of Argentina. Blade and tangent sights, with the Ar

Blade and tangent sights, with the Venezuelan crest on top of the receiver ring, Belgian proofs on the left side and the two line maker's mark/ ...

Beautiful all original, unaltered, near mint 1935 Brazilian Mauser, complete with matching bayonet. Receiver ring marked with Brazil crest with &quo...

Standard Argentine Model 1909 rifle with a very unusual rear sight. The rear sight leaf is unmarked except for a series of numbers (0-9) stamped aroun

Post WWII rework, hooded blade front and tangent rear sights, with the markings removed from the top of the receiver ring and the address and model ma

Fixed sights on a slide marked with maker/model/caliber markings on the left side and "Repr. J.V. ASTROM-BJURTJARN" on the right. Fitted w...

A) Fixed sights on a slide marked with maker/model/caliber markings on the left side. A boxed "Nds" is stamped on the left side of the fra...

A) Manufactured circa 1944. Except for the serial number, the slide is unmarked (a common feature with G prefixed serial numbered Model 1934 pistols).

A) The left side of the slide is marked "P. BERETTA-CAL.9 CORTO-Mo 1934-BREVETETTATO / GARDONE V.T. 1937 XVI". The left grip tang has the ...

Measuring 6 1/4" long from bowl to stem, 5" tall and 1 4/5" wide, the main section of the holder is constructed with a meerschaum bow...

"The French showed themselves to be worthy of victory, but the Russians showed themselves worthy of being invincible" -Napoleon Bonaparte....

Possibly one of only three ever cast as a model for the Rochester New York tribute to Abraham Lincoln by renown sculptor and personal friend of Lincol

Measuring 28 1/2 inches tall including the marble plinth, this bronze depicts a man on horseback, riding down a steep incline. Bronze construction, wi

1) The model is by P.J. Mene (French 1810-1871). Magnificent polychrommed bronze of a standing young fox looking attentive standing on grassy meadow t

1) Dwayne Scott (Am 20th C Fl) signed bronze of a singing cowboy riding a horse. This large bronze depicts the classic Hollywood movie image of a cowb

The 13" horn has a high domed turned wood base and a turned and threaded spout with a turned collar at the tip. The horn is fully engraved, app...

Measuring 6 1/2" long, 5" tall and 3 1/5" wide, with the bowl carved in the form of an partially overgrown pillar, flowers and vines ...

Measuring 8" long, 6 3/4" tall and 2 4/5" wide, made from a single piece of meerschaum, carved into the bust of a Prussian soldier, w...

Measuring in at 6 1/2" long, 6 3/4" tall and 3" wide, depicting a bugling caribou with a 2 1/2" wide 6 point rack. Natural meers...

'Get your kicks on Route 66', or whatever highway you choose to travel with this trip back into the good old days of automobile history. Thi...

Blade is 8 1/2" in length, with a faint simulated temper line and a silver finished textured copper throat. The hilt and sheath are both carved...

Both tusks are attractively colored, with three dimensional carved scenes cut clear into the center of the tusk. 1) Ivory tusk, 27 1/2 inch long, carv

1) Uncarved tusk, 22 1/4" long, 2" across at the base, with 9" long nerve cavity. 2) Carved tusk, 25 3/4" long, 1 1/2" wide...

Also known as a surveyor's compass, the circumfrentor was used both for measuring angles and, in conjunction with a measuring chain, plotting fi...

Measuring 19 1/2 inches when open, this very large razor was made for salesmen to demonstrate the overall form of Case's razors, including the c...

1) Ivory topped sword cane, 38" total length with brass tip, 1 1/10" thick hardwood shaft with carved dragon designs, and 3" long hor...

Founded in 1891, Mills Novelty Company of Chicago was a producer of slot machines up through the 1980s. The machine is 16" wide, 15 deep and 25...

Bound with mottled pattern covers and a leatherette spine with gold decoration and text "HARPER'S WEEKLY/ AND/ FRANK LESLIE'S". Me...