Rock Island - Premiere Collector's Firearms Auction

All titles are black fabric with silver thread borders and embroidered lettering. Titles include "Ostland", "Ost", "Nordlan...

1) Four pair of SS officer's collar tabs, ranks of Oberfuehrer (x2), Brigadefuehrer and Gruppenfuehrer. Excluding one of the Oberfuehrer pairs, ...

1) Pair of Berson jackboots. 2) 10th Princess Mary's Own Gurkha Rifles pillbox cap. 3) Imperial German blue and red field cap with single cockad...

This is a beautiful example of a late production factory engraved Walther PPK semi-automatic pistol. The pistol has been embellished with deep relief

This is a rare example of a PPK with seven digit serial number. The serial number is marked on the right side of the frame and inside the slide. It ha

This is a very nice example of a pre-war Walther model 9 semi-automatic pistol. These were produced from 1921 until 1944 with this example being produ

The front grip strap has a Reich Finanz Verwaltung (Reich Finance Administration) property marking "R.F.V. 15776 W". The slide has the sta...

According to the included laminated capture papers dated September, 15, 1945, this pistol was a war trophy belonging to Pfc. James C. Baker. The pisto

The pistol is marked "WALTHER'S PATENT CAL. 6.35" above the Walther banner on the left side, with "WAFFENFABRIK WALTHER ZELLA-MEH...

Manufactured by Steyr-Daimler for the Nazi SS during World War II with the top of the receiver ring stamped "bnz." over a single SS rune o...

Blade is 31 inches long, single fuller with an etched vine on the spine and etched panels on either side running 17 3/4 inches up, with niter blue fin

1940 Pattern German Stahlhelm with Single Heer sticker. Matte green finish, with a single "gold eagle on black shield" Heer sticker on the...

Introduced in 1939, the Iron Cross Spange (bar) was introduced for soldiers who had won both the 1914 pattern Iron Cross and the 1939 pattern. Those m

1) General pictorial Army with pewter lid that has a figural head of lion and soldier with rifle. Height 12 inches with lithopane bottom of stein depi

This is a nice example of an early pre-war, pre-Nazi Mauser Banner rifle. These rifles were actually transition rifles between the very first commerci

Blade front sight and tangent rear sight graduated to 2,000 meters, with "3351" over a proofmark stamped on the base. The chamber is marke...

Introduced in 1943 this rifle features hooded blade front and adjustable rear sights. Receiver is marked with "ac 44" proof as well as an ...

This is a very late war rifle produced at the Mauser factory under French occupation, as a Kreigsmodell. The rifle is absent of any Nazi proof marks a

Top of barrel has caliber markings, with "JGA" over a symbol of an upheld sword superposed on a shield on the chamber, and "Buscher/S...

This is an example of an improved Model GEW 98 rifle that was manufactured at the Amberg Arsenal in 1917 and subsequently reworked. The most notable i

Inverted "V" and adjustable rear sights, muzzle cover, and leather sling. Crown/letters proofs on the barrel and receiver, with the two li...

The top of receiver ring has a 135 proof over "byf/44", with an eagle firing proof on the left side and two 135 proofs on the right. Left ...

The right side of the barrel is marked "AD", the top of the receiver ring marked with a large Czech crest and the left receiver wall is ma...

Blade front and tangent style rear sights with rear sight graduated to 200 meters. The top of the chamber is marked "MOD. 317K/shield/GUSTLOFF-...

This is a solid example of a pre-war Mauser Banner Portuguese contract commercial Luger. These Lugers were termed a 1935/06 model based on using the 1

This is an excellent example of an early production Swiss 1906/24 military Luger pistol that was produced at the Swiss factory in Bern Switzerland. Th

This is a scarce Luger variation that was produced by the Vickers Ltd. Company in England for the Netherlands. These were produced in the 1915-17 time

This is a fine example of an early Mauser, "K" date code military Luger pistol. The "K Date" P.08 Lugers were manufactured by Ma...

This is a late 1940 production Mauser Luger that has the Mauser Banner marked toggle in the late "x" serial number block. These Police Lug...

This pistol has crown/script letter and Imperial eagle firing proofs with the chamber dated 1915 and the DWM monogram stamped on the toggle. The tange

Matching serial numbers including the magazine. "Eagle/63" acceptance stamps and the type 3 "Test Proof" on the right side of th...

The Model 12-8 bowie features an ivory handle and nickel silver guard and butt cap. The 8 inch blade has the two line Orlando address followed by the

Carbon steel clip point blade, 11 inches long and 2 inches wide at the base, with the scimitar flanked Randall address on the left side. Dual quillion

Both feature carbon steel blades, standard markings, brass guards, stag grips and brown leather Randall sheaths with sharpening stones. 1) Randall Mod

1) Randall Model 13-6 small Arkansas tooth pick with pommel, two line Orlando address on the blade, and simulated ivory handle. OAL 10 3/4 inches, 6 i

Both knives are fitted with carbon steel drop point blades with standard Orlando address markings, brass oval guards, leather washer grips, alloy pomm

Stainless steel blade, with a 5 inch long sharpened back clip and the Orlando address followed by "S" deeply stamped on the left side. Fit...

Both knives are equipped with 7 inch carbon steel blades, 2 3/4 inch false edges, brass oval guards, one piece stag grips, feature the standard Orland

1) Model 3 miniature knife with an "M3" marked Randall leather sheath. 3 1/2 inch blade, OAL 6 3/4 inches. Two line Orlando address with &...

1) Randall Model 14 Attack knife, 7 1/4 inch drop point blade with sharpened false edge and standard Orlando address. Brass oval guard, with a finger-

Both knives have 7 inch blades, standard address markings, brass guards, red white and black spacers, brown leather Randall sheaths and sharpening sto

Constructed from 3/8 inch carbon steel stock, the clip point blade measures 11 inches long and 2 inches wide at the base, with the scimitar flanked Ra

Carbon steel blade, 13 inches with a 6 inch back clip and the Randall stamp on the left side. Upturned dual quillion brass guard, with a black micarta

Both knives have the standard Randall markings, with whetstone and a properly marked Randall sheath. 1) Randall Model 27 knife, 5 3/4 inch stainless s

Both knives have the standard address on carbon steel blades, brass oval guards, and brown leather Randall sheaths with sharpening stones. Also includ

1) Randall Model 26 "Pathfinder" knife, 4 inch stainless steel blade with serrated thumb rest and Randall address. German silver guard and...

Carbon steel blade, 13 inches with a sharp 5 1/2 inch back clip and the Randall stamp on the left side. Upturned brass oval guard, with a smooth one p

Nine inch carbon steel clip point blade with 3 1/2 inch sharpened back clip and the standard Orlando address. Large brass oval guard with upturned qui

Both knives feature clip point carbon steel blades with standard markings, brass guards and pommels, and brown leather Randall sheaths with sharpening

Both knives are equipped with drop point blades, standard markings, oval guards, grooved black micarta grips, green paracord lanyards and brown leathe