Design Auction

A twin table lamp, designed by Josef Frank, Vienna, around 1930, manufactured by Haus & Garten, Vienna, polished brass, the stand covered with p...

A chair with curved arm- and backrest, designed around 1925 by Josef Frank for Haus & Garten, Vienna, solid mahogany, polished, upholstered seat...

A Barcelona chair ("The Red Chair"), designed in 1927 by Kaare Klint for Ruud Rasmussens/Denmark, manufactured in the1930s/40s, solid maho...

A cantilever chair MR 10, designed in 1927 by Ludwig Mies van der Rohe, manufactured in the 1930s by Thonet or Berliner Metallgewerbe Josef Mül...

A table Model M 59, Great Britain, around 1932, the tubular steel frame manufactured by Cox & Co., Birmingham and London, around 1932, chromium ...

A chaise longue Model No. 2072, designed by Le Corbusier - Pierre Jeanneret - Charlotte Perriand, 1928, manufactured around 1935 by Embru, Rüti...

A Lido deck chair, designed in 1935 by Battista and Gino Giudici, Locarno, manufactured around 1955 by Fratelli Giudici, Locarno, marketed by the Wohn

A tea-egg (infuser), designed by Christian Dell, 1924, silver plated brass, length 13.3 cm, very good original condition. Lit.: Christian Dell, Silber

A table B 10 on a loop base, designed by Marcel Breuer, 1927, manufactured by Thonet in the 1930s, chromium plated tubular steel, orange painted wood

A tubular steel chair Model No. 3133, designed around 1931 by Gebrüder Rasch, manufactured around 1934 by L. & C. Arnold, Stendal, chromium...

A cantilever armchair, designed by Anton Lorenz, manufactured by Desta/Berlin or Thonet, 1930s, chromium plated tubular steel, the backrest adjustable

A pair of plafonniers, France, around 1930, chromium plated brass, iron, wood, height 177 cm, diametre of lamp shade 30 cm. Good original condition wi

A set of four armchairs, dossier basculant, designed by Le Corbusier - Pierre Jeanneret - Charlotte Perriand, 1928, manufactured by Cassina in the 199

A desk, an armchair and a chair, Italy, 1930s, the desk of green lacquered metal, aluminium borders, three drawers on either side, with a key, height

An Inkombi storage cabinet, designed and manufactured by the Wohnbedarf AG, Zurich, around 1932, maple veneer, two doors, with original key, black lac

An Inkombi wardrobe, "Laszlo Moholy-Nagy", designed in 1933 for the Wohnbedarf AG/Zurich, early model, walnut veneer, black painted socle,...

A folding chaise longue, designed and manufactured by Embru/Switzerland, 1930s, zinc coated metal tubes, orange-yellow coco matting, with BES paper la

An armchair, designed around 1944/46 by Han Pieck for Lawo, Ommen/Netherlands, manufactured in 1946, made from a single piece of laminated wood, oak v

A pair of stacking chairs, designed in 1934 by Gustav Hassenpflug, manufactured around 1940/45 by Embru, Rüti/ Zurich, Switzerland as Model 125...

A tripod chair, designed by Max Bill, 1949, manufactured by Horgen Glarus/Switzerland, marketed by the Wohnbedarf AG, the legs of solid maple, the sea

A chair, designed in 1947 by Hein Stolle for De Toekomst/Netherlands, oakwood frame, the seat and backrest of laminated birch, height 78 cm, depth 42

An Experimental Chair, designed in 1948 by Han Pieck for Morris/ Glasgow, made from a single piece of laminated wood, walnut veneered surface, height

A pair of early "Safari" armchairs, Scandinavia, 1930s, the design attributed to Kaare Klint or Arne Norrel, plain oak, olive green canvas...

A kitchen cabinet, circle of Margarete Schütte Lihotzky and the Frankfurt Kitchen, 1930s, ivory and pink lacquered soft wood, pull-out trays li...

A chair B 403, designed in 1927 by Ferdinand Kramer, manufactured by the Gebrüder Thonet AG, Germany, around 1930, bentwood, the seat and backr...

A side table, designed in 1949 by Max Bill for Horgen Glarus/Switzerland, early manufacture, tripod base, maple, varnished. the top of black synthetic

A pair of "Safari" armchairs, designed in 1933 by Kaare Klint for Rud Rasmussens, socket-joint ashwood frame, the seat and backrest of nat...

A DCW 1244 chair, designed in 1944 by Charles & Ray Eames for Evans/USA, early model, laminated wood, cherry-wood veneer, inscribed in pencil 3/...

A "Landi" chair, designed in 1938 by Hans Coray, manufactured by R. & W. Blattmann, Metallwarenfabrik Wäderswil/Switzerland prior...

A Sparton radio set, "Table Model 558", designed in 1936 by Walter Darwin Teague, USA, blue plate glass, horizontal chromium bands, black ...

An armchair, attributed to Gio Ponti, Italy, 1940s, aluminium frame, the upholstered seat and backrest covered with a coated anthracite fabric, the ar

A counter-balance weight standard lamp, "Typ SS", designed in 1924 by Edouard Wilfried Bouquet, manufactured in the 1980s, circular cast i...

A table lamp, Ets. Jumo, France,manufactured from 1945 onwards, brown bakelite, partially chromium plated metal, inscribed Jumo France, height 14 cm,

A side table, designed in 1936 by Marcel Breuer for Isokon/Great Britain, laminated wood, original white lacquer coating, height 34 cm, 61 x 42 cm. Li

A desk and an armchair, designed in 1936 by Gerald Summers, manufactured by Makers of Simple Furniture/Great Britain, laminated birch, one side open a

A stacking chair, designed around 1950 by Tapio Wirkkala for Asko/ Finland, chromium plated metal legs, the seat shell of laminated wood and birch ven

A small dining table, designed by Alvar Aalto, 1933, manufactured by Artek/Finland, 1930s, marketed by Isokon/ England, laminated birch, the top stain

A "Superellipse" table, designed in 1968 by Piet Hein for Fritz Hansen, Allerod/ Denmark, early model, the legs composed of bundled steel ...

A pair of chairs, designed and manufactured by Niels Moeller, Denmark, around 1960, solid teak, polished, woven cord seat, manufacturer's stamp,...

A suite of a three-seat and a pair of two-seat sofas, Model Duc 405, designed in 1976 by Mario Bellini for Cassina/Italy, ealry manufacture, metal str

A set of four stacking "Ant" ("Myren") chairs, designed in 1951 by Arne Jacobsen for Fritz Hansen/Denmark, light grey lacquered ...

A set of six stacking chairs, designed in 1952 by Arne Jacobsen, manufactured in 1965 by Fritz Hansen, Allerod, Denmark, chromium plated metal legs, l

A "Grand Prix" stacking chair, designed in 1951 by Arne Jacobsen for Fritz Hansen, Denmark, laminated wood seat shell, curved laminated wo...

A laminated wood chair SB 03, designed around 1950 by Kaes Braakman for UMS Pastoe/Netherlands, laminated birch, varnished, height 80 cm, width 41 cm,

A rare stool, designed around 1950 by Alfred Alter for the Wohnbedarf AG/Zurich, manufactured by Horgen-Glarus, laminated maple wood, varnished, black

A "Grasshopper" armchair, designed in 1946 by Eero Saarinen for Knoll International, manufactured by the Wohnbedarf AG/Zurich, laminated b...

A chair, designed in 1947 by Mart Stam for Goed Wonen/Netherlands, oak, the seat and backrest of woven twisted paper cord, varnished, height 85 cm, de

A rare veneered chair, Model 50 642, designed in 1949/50 by Erich Menzel, manufactured by Deutsche Werkstätten Hellerau, beech with moulded lam...

A "Louisa" armchair, designed in 1950 by Franco Albini for Poggi/Italy, polished hickory, the seat and backrest upholstered, original oran...

An armchair, designed in 1951 by Hans J. Wegner, manufactured around 1955 by Carl Hansen & Son., Odense/Denmark, oak, laminated wood, oak veneer...