Design Auction

A sideboard, designed and manufactured by the Wohnbedarf AG, Zurich, early 1960s, birchwood corpus, four drawers, two sliding doors of red and black g

A "Djinn" armchair and stool, designed by Olivier Mourgue, 1965, manufactured between 1965 and 1976 by Airborne International, France, met...

A large "Direzionali T 96" desk, designed around 1965 by Osvaldo Borsani, for Tecno/Italy, two swivel-mounted bottom cabinets, the base of...

An armchair Model 4801, designed in 1963/64 by Joe Colombo for Kartell/Noviglio, three-part construction of white lacquered moulded laminated wood, wi

A halltree from the "Wire" programme, designed in 1959 by Verner Panton for Plus-Linje, manufactured by Fritz Hansen/Denmark, chromium pla...

A white plastic bed, designed in 1959 by Andreas Christen for H. P. Spengler, Rümlang/Switzerland, polyester, moulded from a single piece, stac...

A white stacking chair, designed in 1959/60 by Verner Panton for Herman Miller/Michigan, manufactured from 1968 onwards, from the first series (before

An orange stacking chair, designed in 1959/60 by Verner Panton, manufactured in 1973 by Fehlbaum/Weil am Rhein, fibre glass, with impressed mark Fehlb

A pair of white stacking chairs, designed in 1959/60 by Verner Panton for Herman Miller/ Michigan, manufactured in 1972 by Fehlbaum/Weil am Rhein, fib

A "Quasars" wall light, designed in 1973 by Angelo Brotto for Editione L'Esperia/Italy, metal, wood, glass decorated with applied glas...

A circular couch table, designed around 1967 by Achille & Giacomo Castiglioni for Kartell/Milano, white ABS plastics, impressed with manufacture...

A luminous table, "Illumesa", designed in 1969 by Verner Panton for Louis Poulsen/Denmark, manufactured in the early 1970s, two red plasti...

A LEM armchair ("Supercomfort"), designed in 1964 by Joe Colombo for Biefeplast/Italy, laminated walnut, the seat, back and armrests uphol...

A rare stool, designed in 1961 by Walter Pabst for Mauser/Germany, white fibre glass, hand-sawn grip opening, height 44 cm, 60 x 35 cm. Lit.: G. Hatze

An "Elda Lounge" chair, designed in 1963 by Joe Colombo for Comfort/Italy, white ebonite seat shell, white quilted leather upholstery, hei...

An armchair Model 4801, designed in 1963/64 by Joe Colombo for Kartell/Noviglio, three-part construction of moulded laminated wood, original white lac

A "Gherpe" table or standard lamp, designed in 1967 by Superstudio for Poltronova/Italy, adjustable opalescent white acrylic shade, height...

A "San Remo" standard lamp, designed in 1968 by Archizoom Assoziati for Poltronova/Italy, ivory and anthracite lacquered metal, acrylic pl...

An armchair UP 1 designed in 1969 by Gaetano Pesce, manufactured by C & B/Italy, moulded polyurethane foam, original black elastic fabric coveri...

A "Bocca" sofa, designed around 1968/70 by Studio 65 for Gufram/Turin, moulded polyurethane foam covered with red stretch fabric, length 2...

A Blow Armchair, designed in 1967 by D. d'Urbino - P. Lomazzi - C. Scolari - J. De Pas for Zanotta/Italy, transparent PVC. First edition. Lit.: ...

A plastic folding bed, designed around 1965 by Salmoiraghi di Pro for Kartell/Italy, white ABS plastics, with impressed mark KARTELL/4545-6/ Designer:

A suite of a rectangular "Stadio 80" table and six "Selene" chairs, designed in 1967/68 by Vico Magistretti for Studio Artemide/...

A "Fun 1 TM" hanging lamp, designed in 1965 by Verner Panton for Lüber/Switzerland, three-part metal frame, circular shell plates on ...

A "Three Flower Pots" hanging lamp, designed in 1968 by Verner Panton for Louis Poulsen, Denmark, orange lacquered iron sheet, orange fabr...

A "Snoopy" table lamp, designed in 1967 by Achille Castiglioni for Flos/Italy, marble foot, glass and metal shade, the outside covered in ...

A "Fun 1 TM" table lamp, designed in 1965 by Verner Panton for Lüber/Switzerland, three-part metal frame, circular shell plates on ch...

A flower vessel, designed by Luigi Colani, 1989, white lacquered ABS plastics, four metal castors, impressed mark and date, fragments of Colani signat

A "Boaloum" chaise longe, designed by Olivier Mourgue, 1968, manufactured by Airborne/ France from 1972 onwards, fibre glass frame, foam u...

A "Colani" seat, designed in 1971 by Luigi Colani for Top System, Burkhard Lübke, yellow polyethylen, with impressed mark: DESIGN/LUI...

A "Zocker" child's stool, designed in 1972 by Luigi Colani for Top System, Burkhard Lübke, manufactured in 1973, orange polyethyl...

A large ceiling light, Model 3620, designed and manufactured by E. Bakalowitz Söhne, Vienna, around 1960, crystal glass elements mounted to acr...

A pair of "Biscia" stacking chairs, designed in 1969 by Pascal Mourgue, manufactured around 1970 by Steiner, France, chromium plated tubul...

A couch table, designed by Kho Liang Li, 1960s, for Artifort/Netherlands, grey lacquered rectangular section metal frame, reversible top, light blue s

A "Palla" armchair and stool, designed in 1969 by Claudio Salocchi for Sormani, moulded polyurethane foam, black stretch fabric, plastic b...

A set of four mirrored wall lights for the "Spiegel" publishing house in Hamburg, designed in 1968/69 by Verner Panton for Louis Poulsen/D...

An anthropomorphic "Floris" chair, designed in 1967 by Günther Beltzig, Germany, for Gebrüder Beltzig, from the edition of Wolfg...

A pair of "Pantella" standard lamps, designed in 1970 by Verner Panton for Louis Poulsen/Denmark, hemispherical white acrylic and white la...

A "Denise" suite of furniture, comprising a settee/chaise longue and two pull-out armchairs, designed in 1965 by Johannes Spalt for Wittma...

A "Sintesi a Morsetto" clamping spotlight, designed around 1975 by Ernesto Gismondi for Artemide/Italy, metal coated with grey and white s...

A suite comprising two armchairs and a table, from the "Farmer" programme, designed by Gerd Lange, 1966, solid ashwood, oiled, natural lin...

An "Atomium" chandelier, Austria, around 1970, chromium plated metal, 19 lights, diametre 66 cm.EURO 600 - 800 US $ 530 - 710

A wall element E 22, designed in 1968 by Osvaldo Borsani for Tecno/Italy, polished rosewood, the corpus with two sliding doors and four shelves, with

A three-piece suite, designed around 1975 by Donald Chadwick for Herman Miller/Michigan, reeded ebonite socle, foam upholstery, green stretch cover, o

A "MAgriTTA" seat object, designed by Roberto Sebastian Matta, 1970, manufactured by Simon International for Gavina/Bologna, early manufac...

An "Easy Edges" chair, designed by Frank O. Gehry, 1972, manufactured by Easy Edges Inc., New York, 1972, corrugated cardboard, hardboard,...

A UP 7 seat sculpture, designed by Gaetano Pesce, 1969, manufactured by C & B, Italy, Novedrate/Como, moulded polyurethane foam, length 165 cm, ...

A "Lom" extension table, designed around 1985 by Francesco Binfare for Cassina s. p. a. /Italy, black stained oak, green and violet plasti...

A suite comprising a pair of "Dr. Glob" chairs and a "Miss Balu" table, designed in 1988 by Philippe Starck for Kartell/Milano, ...

A "Blue Magic" coffee service, designed and manufactured by Ingrid Smolle, hand-made for Villeroy & Boch, conceived within the worksho...