Rock Island - Premiere Collector's Firearms Auction

Manufactured from 1872 to 1888 with a total production of approximately 6,000, with approximately 5,000 sold to the U.S. government. The pistol has an

Manufactured in the early 1870s on government contract. Standard Remington address and patent marking along the lower edge of the left side of the fra

This Smith & Wesson revolver model was also known as the "D.A. Frontier". It is a top-break revolver which automatically ejects spent ...

One of approximately 250-300 manufactured circa1880’s on contract order for the Australian Colonial Police. The top of the barrel rib is marked with t

Manufactured circa 1873 to 1878 with approximately 85,200 manufactured, this model is commonly known as the Old Model Russian and is easily recognizab

Identical to American Models except for the barrel address and chambered for the 44 Russian rather than the 44 American. This is a commercial variatio

Introduced in 1903 this unique breech loading cannon measures 12 inches long with "- NOT FOR BALL -" marked towards the front and the two ...

Brass construction, 32 1/2 inches long with a 2.13 inch bore and 2 inch trunnions. No makers marks are visible. With a wood carriage, 18 inches wide a

Measuring 22 inches in overall length, with a 1.48 inch bore, 1.48 inch diameter trunnions and a touchhole bored through the knob. No makers marks are

1) National ROTC 1946 rifle match first place plaque. 2) Bronze Buereau Brothers percussion musket from an unknown monument, 54 1/ inches long. 3) Sma

Typically this plate would be attached to the breech end of a barrel housing and would house the spirit level. The spirit level was used in sighting t

1) "Sioux Indians in Tribal Costume, Tri-State Round-Up, Belle Fourche, S.D." photograph in a 33 1/4 inch x 9 inch wooden frame. Held in t...

This is a beautiful example of a U.S. Government inspected Colt Model 1883 Gatling gun with carriage and rare caisson. The Gatling gun was first devel

Measuring 31 1/2 inches in overall length, with a 1.67 inch bore, 2.1 inch diameter trunnions, the cannon lacks visible makers or weight marks though

Measuring 31 1/2 inches in overall length, with a 1.67 inch bore, 2 inch diameter trunnions, the cannon lacks visible weight or makers marks and appea

This is a beautiful pair of 1/2 scale mallard decoys made and painted by Charles Perdew for F.D. Loomis. Loomis and F.W. Paralee were commissioned by

This is a super example of a miniature carved mallard done by Charles Perdew (1874-1963). Perdew was the best known and most prolific decoy carver on

This is a beautiful pair of 1/3 scale mallard decoys made by Charles Perdew and painted by his wife Edna. F.D. Loomis. Loomis and F.W. Paralee were c

This is a fantastic example of a Charles Perdew (1874-1863) carved miniature mallard duck. Perdew was the best known and most prolific decoy carver on

This is a beautiful example of a flying pintail hen carved by Charles Perdew (1874-1863). Perdew was the best known and most prolific decoy carver on