RR Auction: Space Exploration

Apollo Guidance and Navigation System eyepiece stowage case, measuring approximately 23? x 8? x 12?, with an MIT Instrumentation Lab/AC Electronics ta

Beige metal adaptor for the Apollo liquid cooling and ventilation garment, 2.75 x 2.5, made by Air-Lock and engraved with part numbers: "Assy. ...

Rare flight version of an Apollo Lunar Module AC Power Inverter in its handling frame, measuring an overall 11? x 29.5? x 12? and weighing 41 lbs, wit

Group of two talkback indicators—commonly called 'barber poles' due to their diagonal black-and-white stripes—for the Apollo Lunar Module, e...

Apollo Lunar Module Control Panel #8 with most electrical umbilical cables to rear intact, measuring 31.25? x 8? x 11.5?, marked on the re...

Highly desirable component of the Apollo Lunar Module's landing leg deployment truss sideframe assembly, measuring approximately 34? x 9? x 4.5?...

Titanium core stem tube designed for use with the Apollo Lunar Surface Drill (ALSD) to take long samples of lunar soil, plus one carbide core stem dri

A rubber elbow convolute assembly from an Apollo program pressure suit. The opening of the elbow measures approximately 6? x 2?, with ribbed green rub

Hose and fitting assembly used to connect the Primary Life Support System to the Apollo A7L space suit, measuring 37? in length and terminating...

Light blue Apollo Program clean room jumpsuit with embroidered "Apollo 17 Crew" patch on the chest, sealed in its bag with affixed "F...

Unflown Apollo-era six-switch metal panel cover, 6.25 x 1.75 x 3, with single toggle switch stamp-dated January 21, 1966, and marked with part numbers

Unflown Apollo-era Torx driver bit tool, measuring 3.5? in length, marked on either side with part number: "V16–601481-11," with a fa...

Apollo-era Reaction Control System disconnect coupling, measuring 4.75? x 1.5?, with removal directions impressed on cap and part numbers to body date

Rare acrylic display containing a piece of aft heat shield from the AS-201 (CSM-009) spacecraft, which launched from Cape Kennedy LC-34 on February 26

Rare and sizable piece of heat shield from the AS-202 (Apollo CSM-011) spacecraft, which launched from Cape Kennedy LC-34 on August 25, 1966, and spla

Joe Kerwin’s A7LB IV Intravehicular Glove designed by ILC Dover, with a wrist opening diameter of 3.5? and standing approximately 9? in height, constr

Rare Lunar Module Upper Docking Tunnel Hatch manufactured by Grumman as a developmental or test article circa 1967–1968, measuring 31.5? x 43.5? x 8?,

Rare Lunar Module Translation Control Assembly, measuring 7.75? x 8? x 5? overall, with upper portion missing original Grumman Aircraft Eng. Corp labe

Rare liquid cooling and ventilation garment designed to be worn underneath an Orlan EVA spacesuit, which consists of a series of plastic tubes that ar

Red connector with locking tab as used on the A7L and A7LB lunar mission pressure suits (lower left gas connector), 2.75 x 1.75, made by Airlock and e

Apollo A7L space suit oxygen vent pad assembly, measuring 5.25? x 1.25? x 1?, engraved on the edge with part numbers, "PN-A7LB-109011-01, PN-28...

Apollo A7LB space suit pressure relief valve, measuring 2? in diameter and 1.25? tall, engraved on the edge with part numbers, "ASSY 9334-04, S...

Extremely long Beta-cloth umbilical hose cover for the Apollo Command/Service Module, measuring approximately 122? in length, with front label marked,

Apollo Lunar Module/Command Module compressed nitrogen bottle used to help lift the spacecraft hatches, measuring 9? long and 1? in diameter, marked o

Apollo Lunar Module coldplate assembly, measuring 22.5? x 3? x 1.5?, stenciled on the front with part numbers: "Cold Plate Assy, DSGN Cont...

Red metal elbow connector produced by Air-Lock for the Apollo space suit, 3.25 x 2.75 x 1.25, marked “Not For Chamber or Flight Use” and engraved with

Blue metal elbow connector produced by Air-Lock for the Apollo spacesuit, 3.25 x 2.75 x 1.25, engraved with part numbers, “PN-4263B, SN-141.” Elbow co

Blue blanking plate, 2.75 x 1.5, designed for an Apollo pressure suit connector. In fine condition, with expected wear from use.

Unflown Apollo-era single toggle switch panel, measuring 1.25 x 1.25 x 3.25, made by Honeywell's Micro Switch Division in Freeport, Illinois. Th...

Large wound length of wire from the Lunar Receiving Laboratory, approximately measuring 5.25? in diameter, sealed within its original plastic d...

Group of 20 white plastic Lunar Receiving Lab (LRL) moon rock secondary sample containers, each measuring about 1.25? in diameter and 2.75? tall, seal

Blue connector for Apollo pressure suits, 2.75 x 1.75, engraved with part numbers: “Assy. 9090, SN–172,” with the underside marked: “PN–1879B, SN-148.

Group lot of three water fittings, including two Zeroaire MK III parts made by the Seaton–Wilson Mfg. Co., 1.25 x 3 and 1.5 x 3, with part numbers: ...

Flown piece of metal from the fuel tank of the Apollo Lunar Module-1 spacecraft, which was launched as part of the Apollo 5 mission from Cape Kennedy

Highly appealing first edition color NASA lunar chart, 38 x 25.75, featuring 1:10,000,000 scale Mercator and Stereographic projections of the surface

Scarce official embroidered patch for the Apollo 5 mission, the first unmanned test flight of the Apollo Lunar Module, measuring 4.25? in diame...

Sought-after 1:32 solid mahogany scale model of an Apollo Command Module by the Toys and Models Corporation, measuring 12.75? in length and suspended

Rare official embroidered Grumman Lunar Module patch, with red scroll to lower portion reading, "Vehicle 1 Team," measuring 3.75? x 3...

Signed book: Apollo Expeditions to the Moon. First edition. Washington, D.C.: NASA, 1975. Hardcover, 9.25 x 12, 313 pages. Signed on the opening ...

Striking color 26.25 x 17.5 print of Paul Hudson's 1985 work entitled 'Astronauts with Jetpacks,' showing two astronauts soaring over a ...

Original pair of Grumman Aircraft Engineering blueprints, 17 x 11.5, detailing various packages of the Apollo Lunar Module, identified as sheets 11 an

Group of material related to the Apollo missions, including: four Apollo program Manned Flight Awareness posters, ranging in size from 8 x 10.5 to 17

Fascinating work journal belonging to NASA engineer Jack H. Cohen of the Manned Spacecraft Center in Houston, Texas, 8 x 10.5, containing approximatel

Original NASA/Grumman Apollo Lunar Module Transgraphic brochure printed in the mid-1960s in Germany. This brochure measures 8 x 10 and features eight

Desirable and exceptionally rare flown Christian flag carried into low Earth orbit during the Apollo 7 mission, 12.25 x 8, signed and flight-certified

Huge vintage official Rand McNally map of the moon at an approximate scale of 1:2,300,000, 42 x 42, signed in blue ballpoint, "Many Thanks, Bil...

Iconic color 22 x 17 print of the Apollo 8 'Earthrise,' signed and inscribed in black felt tip, "To Linda, with many thanks for your fi...

Jim McDivitt’s flown overview schematic for the Lunar Module cryosystem, 27.25 x 10.5 (two taped pages), carried into geocentric orbit for 10 days dur

Unique aluminum paper clamp, 2.25 x 2, flown and used on the lunar module in Earth orbit during the Apollo 9 mission. The clip was used to hold open c

Rusty Schweickart's flown interim stowage strap, 10.5? in length, carried into geocentric orbit aboard the Lunar Module Spider during the Apollo...