RR Auction: Space Exploration

Apollo Guidance and Navigation System eyepiece stowage case, measuring approximately 23? x 8? x 12?, with an MIT Instrumentation Lab/AC Electronics ta

Beige metal adaptor for the Apollo liquid cooling and ventilation garment, 2.75 x 2.5, made by Air-Lock and engraved with part numbers: "Assy. ...

Rare flight version of an Apollo Lunar Module AC Power Inverter in its handling frame, measuring an overall 11? x 29.5? x 12? and weighing 41 lbs, wit

Group of two talkback indicators—commonly called 'barber poles' due to their diagonal black-and-white stripes—for the Apollo Lunar Module, e...

Apollo Lunar Module Control Panel #8 with most electrical umbilical cables to rear intact, measuring 31.25? x 8? x 11.5?, marked on the re...

Highly desirable component of the Apollo Lunar Module's landing leg deployment truss sideframe assembly, measuring approximately 34? x 9? x 4.5?...

Titanium core stem tube designed for use with the Apollo Lunar Surface Drill (ALSD) to take long samples of lunar soil, plus one carbide core stem dri

A rubber elbow convolute assembly from an Apollo program pressure suit. The opening of the elbow measures approximately 6? x 2?, with ribbed green rub

Hose and fitting assembly used to connect the Primary Life Support System to the Apollo A7L space suit, measuring 37? in length and terminating...

Light blue Apollo Program clean room jumpsuit with embroidered "Apollo 17 Crew" patch on the chest, sealed in its bag with affixed "F...

Unflown Apollo-era six-switch metal panel cover, 6.25 x 1.75 x 3, with single toggle switch stamp-dated January 21, 1966, and marked with part numbers

Unflown Apollo-era Torx driver bit tool, measuring 3.5? in length, marked on either side with part number: "V16–601481-11," with a fa...

Apollo-era Reaction Control System disconnect coupling, measuring 4.75? x 1.5?, with removal directions impressed on cap and part numbers to body date

Rare acrylic display containing a piece of aft heat shield from the AS-201 (CSM-009) spacecraft, which launched from Cape Kennedy LC-34 on February 26

Rare and sizable piece of heat shield from the AS-202 (Apollo CSM-011) spacecraft, which launched from Cape Kennedy LC-34 on August 25, 1966, and spla

Joe Kerwin’s A7LB IV Intravehicular Glove designed by ILC Dover, with a wrist opening diameter of 3.5? and standing approximately 9? in height, constr

Rare Lunar Module Upper Docking Tunnel Hatch manufactured by Grumman as a developmental or test article circa 1967–1968, measuring 31.5? x 43.5? x 8?,

Rare Lunar Module Translation Control Assembly, measuring 7.75? x 8? x 5? overall, with upper portion missing original Grumman Aircraft Eng. Corp labe

Rare liquid cooling and ventilation garment designed to be worn underneath an Orlan EVA spacesuit, which consists of a series of plastic tubes that ar

Red connector with locking tab as used on the A7L and A7LB lunar mission pressure suits (lower left gas connector), 2.75 x 1.75, made by Airlock and e