RR Auction: Space & Aviation Auction

Hewlett-Packard 3443A High Gain/Auto Range Unit, 6 x 4.75 x 8.75, featuring a voltage selector knob on the front panel. Conventional piece of test equ

Collection of Spacehab hardware and materials, including: a canvas flight bag; small sign; mesh liner; armband; and thermal material. In overall fine

Assortment of spare and backup hardware from the Shuttle and Spacelab programs. Includes the following pieces, many sealed in their original plastic:

High temperature Shuttle Orbiter foil insulator, 23.75 x 12.5 x 1, with a identification label partially obscured by red paint, in part: “V070…10057-0

Early Aydin Vector “freq. div. wideband” multiplexer, 11 x 6 x 4.5, with various inputs and outputs on one side and a tag on the other with a label re

Shuttle Nose Cap Peripheral Tile Support. Aluminum angle support measures approximately 13? long, with a few remnants of the red Room Temperature Vulc

Unused fully intact Space Shuttle Solid Rocket Booster (SRB) pilot parachute complete with canvas lanyards. Stencilled on the outside of the bag is “P

Shuttle remote power controller. Manufactured by Westinghouse Electric, controller measures 1.5 x 1.5 x .75, with a Westinghouse Electric label affixe

Shuttle-era protein crystal growth experiment power control panel, 19 x 7 x 10.5, with two switches on the front and three inputs or outputs on the ba

Shuttle strut assemblies inside a Zero Centurion Elite metal case, 16 x 8 x 9, bearing a “Space Division, Rockwell International” tag with the label,

Extremely long Shuttle/Solid Rocket Booster (SRB) drogue parachute suspension lines, with markings reading, “P/N 5603-501 Date of Mfr. Mar 1985, S/N S

Shuttle-era EVA disposable Urine Collection Device (UCD), manufactured by Boeing. Device is stored in a sealed bag, along with an identification label

Large white metal ERNO-Spacelab support platform, 26.5 x 29.5 x 6, bearing an ERNO tag on a lower panel with the part name, “Coldplate Supp. Str.,” an

Small collection of Space Shuttle parts, consisting of four bolts ranging in length from 2.5? to 7?, and two nuts with diameters of .75? and 1.5?. Har

Shuttle connecting rod for a radiator release latch attached to the Payload Bay door. Rod measures approximately 16.5? long, manufactured by Shur-Lok,

Development Flight Distributor Unit similar to one that flew as the main payload on shuttle mission STS-1. Unit measures 16 x 8 x 16 and weighs approx

Two pieces of Shuttle–era rack-mountable equipment in their original NASA shipping containers. One piece of equipment has a NASA label on the reverse

Available to US bidders only. Flown swatch of Fibrous Insulation Blanket (FIB), 5 x 3, used aboard Space Shuttle Challenger’s STS-41-G mission. In fin

Flown aluminum slag sample, carried on board shuttle mission STS-65. Small sample is a piece of unburned aluminum propellant from the shuttle’s solid

Impressively large and heavy Space Shuttle bolt, 6.5? long and weighing 2.5 pounds, used during an unknown mission. Bolt is well-used with grease-fill

Available to US bidders only. Flown thermal control system blanket with white fabric on one side and orange material on the other, 13 x 6, bearing the

Flown oleophobic filter canister from a shuttle orbiter body flap, 5? tall and 3? in diameter, bearing engraved part numbers on top, “0711325-103 S/N

Available to US bidders only. Curved Shuttle fit check tile, 6.26 x 6 x 2, marked “V070391034-307,” with other notations on the same side. Before crew

Available to US bidders only. Very rare Challenger-flown LRSI (Low-temperature Reusable Surface Insulation) tile, 6 x 6.5, #V070-391039 037-008451. Ti

Available to US bidders only. A black thermal protection system tile, 5.75 x 6, with NASA identification numbers using a dot matrix part marking print

A packet of 12 bolts flown on Spacelab-2, carried on Challenger mission STS-51F. Packet is sealed in plastic, with a KSC 4-8A form filled out by a tec

Omega Speedmaster watch issued by NASA. Chronograph watch is engraved on the reverse, “S/N 1102,” as well as bearing a NASA parts number. Two JSC tags

STS-103 Robbins medal, #151, approximately 1.5 diameter, with a raised design on the face of the mission’s insignia. The reverse of the sterling silve

Flown embroidered Shuttle mission STS-38 mission patch, 4? in diameter, carried on board the Atlantis during its November 1990 mission. Patch is affix

Available to US bidders only. Large piece of flown Beta cloth cargo bay liner with a black box pattern, 38 x 27.5, last flown in space on the Space Sh

Available to US bidders only. Large swatch of flown Beta cloth cargo bay liner with a black box pattern, 22 x 6, last flown in space on the Space Shut

Flown printed fabric American flag patch, 6.25 x 4.25, worn on Lousma’s PBI S1030A Ejection Escape suit during the launch and landing of the shuttle C

Flown printed fabric American flag, 5.75 x 4, flown aboard the Space Shuttle Discovery during its April 1990 mission which launched the Hubble telesco

Flown printed fabric IML–1 flag, 6 x 3.75, flown aboard the Space Shuttle Discovery during its January 1992 mission carrying the International Microgr

Flown printed fabric American flag, 5.5 x 4, flown aboard the Space Shuttle Columbia during its October–November 1995 mission. Flag is affixed to an 1

Flown printed fabric shuttle Shuttle-Mir Program flag, 5.25 x 4, flown to the Mir Space Station aboard the Space Shuttle Discovery during its June 199

Flown entry checklist carried on board Shuttle Challenger mission 51-B from April 29–May 6, 1985. This eight-page, double-sided checklist measures 5.5

Flown printed fabric American and Japanese flags, both approximately 5.5 x 4, flown aboard the Space Shuttle Endeavour during its September 1992 missi

Flown debriefing notes made by Bob Overmyer carried on board Shuttle Challenger mission 51-B from April 29–May 6, 1985. Pencil notations are on three

Flown checklist carried on board the Shuttle Challenger mission STS-51-F from July 29–August 6, 1985. Checklist measures 5.5 x 8.25 and is bound toget

Color 8 x 10 NASA photo of Thorne in his blue flight suit next to a space shuttle model, signed in black felt tip, “Steve Thorne.” In fine condition,

Color satin-finish 8 x 10 photo of Ride in a white turtleneck and leather jacket, signed in black felt tip. In very fine condition.

Color 10 x 8 cardstock crew photo, signed in black felt tip by Roberta Bondar, Ken Money, Bob Thirsk, Steve MacLean, Marc Garneau, and Bjarni Tryggvas

Color 8 x 10 NASA photo of Young in his blue space shuttle flight suit with several spacecraft models in front of him, signed and inscribed in black f

Color 8 x 10 NASA photo of Ride, signed in black felt tip, “Sally K. Ride.” A few surface impressions and a tiny tear to the upper border, otherwise f

Color 11 x 8.5 cardstock photo of McCandless performing his historic EVA, signed in black felt tip, “Bruce McCandless, STS 41-B.” In fine condition, w

Color satin-finish 10 x 8 photo of McCandless on board the shuttle, signed in black felt tip, “Bruce McCandless II, STS-31.” In very fine condition.

Nicely framed photo montage honoring the final shuttle mission, consisting of four color glossy 5.5 x 3.5 photos and a mission patch double-matted and

Five photos: four color 8 x 10 NASA photos, including one ‘red-numbered’ photo, each signed and inscribed in black felt tip by Musgrave; and one color

Five color 10 x 8 NASA crew portraits, each signed in felt tip by the complete shuttle crews pictured. STS missions included are: 29, 33, 36, 38, and