RR Auction: Space & Aviation Auction

Color 8 x 10 NASA photo of Schmitt in his white space suit, signed in black felt tip, “Harrison H. Schmitt.” In very fine condition.

Color 10 x 8 NASA photo of the nighttime launch of Apollo 17, signed and inscribed in black felt tip “To Paul and the future! Harrison H. Schmitt, Apo

Color 7.25 x 9.25 NASA photo of Schmitt posing in his white space suit, signed in black felt tip, “Harrison H. Schmitt, Apollo 17.” Nicely double-matt

Apollo-Soyuz Robbins Medal, approximately 1.25” diameter, with a raised design on the face of the mission insignia, and the mission and astronauts’ na

A flown 5.5 x 5.5 Beta cloth swatch, with a 3.25? mission insignia printed in the center, signed along the bottom in black ink, “Flown on ASTP 15-24 J

Color limited edition 35 x 25 print of an artist’s rendition of the Apollo-Soyuz docking numbered #665/1500, signed in pencil by American astronauts T

Color 10 x 8 NASA photo of the American crew members of the Apollo-Soyuz mission, signed in black felt tip by Deke Slayton, Tom Stafford, and Vance Br

Color 6.5 x 9.25 photo of the launch of the American Apollo-Soyuz crew, affixed to its original 11 x 14 mount, signed on the mount in black ink by Dek

Color 10 x 8 NASA ‘floating head’ crew photo, signed in black felt tip by the full crew: Deke Slayton, Vance Brand, Tom Stafford, Alexei Leonov, and V

Color 8 x 10 NASA photo of Slayton in his white space suit posing with a model of the Apollo-Soyuz mission, signed in black felt tip. In fine conditio

FDC with a cachet honoring the Apollo-Soyuz mission, signed in black felt tip by Tom Stafford, Deke Slayton, and Vance Brand. In very fine condition.

Bob Crippen’s ASTP shirt assembly. Mustard color shirt from the Apollo Applications Program (AAP) (Skylab flights 2, 3, 4, and ASTP) used for either t

Printed Apollo-Soyuz Final Flight Plan, JSC-09137, 8 x 10.5, May 15, 1975. Flight plan providing a minute-by-minute plan for the entire mission, from

Flown swatch of Kapton foil, 1 x .75, removed from the crew compartment heat shield of the US ASTP Command Module #111 spacecraft of mission AS-210. F

A folding 6.25 x 3.5 display card honoring the mission, signed in felt tip and ballpoint by the entire crew: Tom Stafford, Vance Brand, Deke Slayton,

FAA Department of Transportation medical certificate, 3.5 x 5.25, dated February 21, 1975, stating that Slayton has met the medical standards required

A philatelic souvenir honoring the Apollo-Soyuz mission, signed in black felt tip and ballpoint by the full crew: Tom Stafford, Vance Brand, Deke Slay

Collection of 17 unsigned items related to the Apollo-Soyuz Test Project, including: one sterling silver medal honoring the mission minted by Balfour,

Signed book: Living Psalms and Proverbs. Later printing. Wheaton, IL: Tyndale House, 1971. Softcover, 4.5 x 6.75, 745 pages. Signed and flight-certifi

Flown penlight carried on board Skylab 3. Brass-milled two-cell light measures 5.25? long, with “ACR FA-5, S/N 2023, Date of Mfg. 2/70,” stamped on th

Flown printed fabric American flag, 5.5 x 3.75, flown to the Skylab 3 space station, signed in black felt tip, “Carried on board Skylab III, Ed Gibson

Skylab 1 Robbins medal, #68, approximately 1.5 diameter, with a raised design on the face of the mission’s insignia. The reverse of the sterling silve

Flown cassette tape carried into orbit by Paul Weitz on the SL-2 mission. Scotch cassette tape was dubbed with music from country artist Eddie Arnold

Flight-ready duct fan intended for mounting in the Skylab Orbital Workshop space station ventilation control subsystem. Cylindrical fan assembly measu

Flown Beta cloth patch carried on board the Skylab I mission in 1973. Beta cloth patch measures 3.75 x 3.75 with the NASA ‘meatball’ logo in the cente

Skylab Pyro Substitute device. Device is housed in its original packaging and measures approximately 3.5? long with red tape around the center. A fill

NASA CSM Malfunction Procedures manual, Revision A, 8.5 x 11, prepared by the Flight Planning Branch, Crew Procedures Division, and dated September 1,

Dave Scott’s Skylab JSC Flight Readiness Review Part V, dated April 13, 1973, 10 x 8.5, 83 pages, bound by two staples to the left edge. Review covers

Signed book: Skylab EREP Investigations Summary. Washington, D. C.: NASA's Scientific and Technical Information Office, 1978. Hardcover, 9.25 x ...

Block of four First Man on the Moon postage stamps, 5 x 2.75, signed in blue felt tip, “Jack Lousma,” and black ink, “Charles Conrad, Jr.” Moderate co

Skylab recovery cover with a cachet honoring the third flight’s naval recovery force, signed in black ink by Gibson. In fine condition.

Skylab fragment, recovered from an oxygen supply tank by three people in Western Australia. Piece is encased in a styrene-type display, measuring 4.25

Six color vintage 8 x 10 NASA photos of Skylab astronauts, each signed and inscribed in felt tip or ink to “Nancy.” Signers are: Joseph Kerwin, Edward

Color 10 x 8 NASA ‘floating heads’ photo, signed in blue and black ink by all nine astronauts: Charles Conrad, Joe Kerwin, Paul Weitz, Alan Bean, Owen

Color 10 x 8 NASA photo of Skylab in orbit, signed in black felt tip by Gerald Carr, Edward Gibson, and William Pogue, with one adding, “American reco

Color 10 x 8 NASA photo of the final Skylab crew, signed in black felt tip by all three: Gerald Carr, Edward Gibson, and William Pogue. In fine condit

Color satin-finish 8 x 10 ‘red numbered’ NASA photo of Carr flying the AMU, signed in black felt tip, “First flights of the AMU (on board Skylab!), Je

Color glossy 10 x 8 NASA photo of Lousma showering in the crew quarters on Skylab, signed in black felt tip, “This hot shower was ‘out of this world!’

Color 10 x 8 NASA photo of Lousma piloting the M509 experiment, signed in black felt tip, “First flight of the AMU aboard Skylab! Jack Lousma, SL-3 Pi

Available to US bidders only. Flown Multi-Layer Insulation (MLI) Blanket with white fabric on one side and gold foil on the other, 27 x 28, bearing th

Available to US bidders only. Large flown fibrous polymide film insulation blanket with silver foil on both sides, 57 x 27, bearing the part numbers,

Available to US bidders only. Space Shuttle Columbia high temperature Shuttle Orbiter foil insulator, 23.5 x 15.75 x .5, with an identification label

Available to US bidders only. Flown high temperature Shuttle Orbiter insulator, approximately 37 x 19 x 6.5, flown on the Space Shuttle Endeavour duri

Available to US bidders only. Flown high temperature Shuttle Orbiter metal and foil insulator, approximately 15 x 10 x 6, flown on the Space Shuttle E

Available to US bidders only. Flown Shuttle TCS (Thermal Control System) blanket carried on board the Shuttle Atlantis on Mission STS-86 in September/

Flown thermal barrier carried on board the Space Shuttle Atlantis during mission STS-86 from September 25 to October 9, 1997. Barrier measures 11.5? i

Available to US bidders only. Flown Shuttle TCS (Thermal Control System) blanket carried on board the Shuttle Endeavour on Mission STS-77 in May 1996

Available to US bidders only. Flown Shuttle TCS (Thermal Control System) blanket carried on board the Shuttle Discovery on Mission STS-85 in August 19

Available to US bidders only. A flown section of shuttle wing insulation from one of the orbiters. Section and measures approximately 18 x 10 x 5 and

Large “Remove Before Flight” protective cover, 20.5 x 33.5, stenciled in red paint “Remove Before Flight.” Panel also bears a Rockwell International S