RR Auction: Space & Aviation Auction

Hewlett-Packard 3443A High Gain/Auto Range Unit, 6 x 4.75 x 8.75, featuring a voltage selector knob on the front panel. Conventional piece of test equ

Collection of Spacehab hardware and materials, including: a canvas flight bag; small sign; mesh liner; armband; and thermal material. In overall fine

Assortment of spare and backup hardware from the Shuttle and Spacelab programs. Includes the following pieces, many sealed in their original plastic:

High temperature Shuttle Orbiter foil insulator, 23.75 x 12.5 x 1, with a identification label partially obscured by red paint, in part: “V070…10057-0

Early Aydin Vector “freq. div. wideband” multiplexer, 11 x 6 x 4.5, with various inputs and outputs on one side and a tag on the other with a label re

Shuttle Nose Cap Peripheral Tile Support. Aluminum angle support measures approximately 13? long, with a few remnants of the red Room Temperature Vulc

Unused fully intact Space Shuttle Solid Rocket Booster (SRB) pilot parachute complete with canvas lanyards. Stencilled on the outside of the bag is “P

Shuttle remote power controller. Manufactured by Westinghouse Electric, controller measures 1.5 x 1.5 x .75, with a Westinghouse Electric label affixe

Shuttle-era protein crystal growth experiment power control panel, 19 x 7 x 10.5, with two switches on the front and three inputs or outputs on the ba

Shuttle strut assemblies inside a Zero Centurion Elite metal case, 16 x 8 x 9, bearing a “Space Division, Rockwell International” tag with the label,

Extremely long Shuttle/Solid Rocket Booster (SRB) drogue parachute suspension lines, with markings reading, “P/N 5603-501 Date of Mfr. Mar 1985, S/N S

Shuttle-era EVA disposable Urine Collection Device (UCD), manufactured by Boeing. Device is stored in a sealed bag, along with an identification label

Large white metal ERNO-Spacelab support platform, 26.5 x 29.5 x 6, bearing an ERNO tag on a lower panel with the part name, “Coldplate Supp. Str.,” an

Small collection of Space Shuttle parts, consisting of four bolts ranging in length from 2.5? to 7?, and two nuts with diameters of .75? and 1.5?. Har

Shuttle connecting rod for a radiator release latch attached to the Payload Bay door. Rod measures approximately 16.5? long, manufactured by Shur-Lok,

Development Flight Distributor Unit similar to one that flew as the main payload on shuttle mission STS-1. Unit measures 16 x 8 x 16 and weighs approx

Two pieces of Shuttle–era rack-mountable equipment in their original NASA shipping containers. One piece of equipment has a NASA label on the reverse

Available to US bidders only. Flown swatch of Fibrous Insulation Blanket (FIB), 5 x 3, used aboard Space Shuttle Challenger’s STS-41-G mission. In fin

Flown aluminum slag sample, carried on board shuttle mission STS-65. Small sample is a piece of unburned aluminum propellant from the shuttle’s solid

Impressively large and heavy Space Shuttle bolt, 6.5? long and weighing 2.5 pounds, used during an unknown mission. Bolt is well-used with grease-fill