RR Auction: Space & Aviation Auction

Skylab recovery cover with a cachet honoring the third flight’s naval recovery force, signed in black ink by Gibson. In fine condition.

Skylab fragment, recovered from an oxygen supply tank by three people in Western Australia. Piece is encased in a styrene-type display, measuring 4.25

Six color vintage 8 x 10 NASA photos of Skylab astronauts, each signed and inscribed in felt tip or ink to “Nancy.” Signers are: Joseph Kerwin, Edward

Color 10 x 8 NASA ‘floating heads’ photo, signed in blue and black ink by all nine astronauts: Charles Conrad, Joe Kerwin, Paul Weitz, Alan Bean, Owen

Color 10 x 8 NASA photo of Skylab in orbit, signed in black felt tip by Gerald Carr, Edward Gibson, and William Pogue, with one adding, “American reco

Color 10 x 8 NASA photo of the final Skylab crew, signed in black felt tip by all three: Gerald Carr, Edward Gibson, and William Pogue. In fine condit

Color satin-finish 8 x 10 ‘red numbered’ NASA photo of Carr flying the AMU, signed in black felt tip, “First flights of the AMU (on board Skylab!), Je

Color glossy 10 x 8 NASA photo of Lousma showering in the crew quarters on Skylab, signed in black felt tip, “This hot shower was ‘out of this world!’

Color 10 x 8 NASA photo of Lousma piloting the M509 experiment, signed in black felt tip, “First flight of the AMU aboard Skylab! Jack Lousma, SL-3 Pi

Available to US bidders only. Flown Multi-Layer Insulation (MLI) Blanket with white fabric on one side and gold foil on the other, 27 x 28, bearing th

Available to US bidders only. Large flown fibrous polymide film insulation blanket with silver foil on both sides, 57 x 27, bearing the part numbers,

Available to US bidders only. Space Shuttle Columbia high temperature Shuttle Orbiter foil insulator, 23.5 x 15.75 x .5, with an identification label

Available to US bidders only. Flown high temperature Shuttle Orbiter insulator, approximately 37 x 19 x 6.5, flown on the Space Shuttle Endeavour duri

Available to US bidders only. Flown high temperature Shuttle Orbiter metal and foil insulator, approximately 15 x 10 x 6, flown on the Space Shuttle E

Available to US bidders only. Flown Shuttle TCS (Thermal Control System) blanket carried on board the Shuttle Atlantis on Mission STS-86 in September/

Flown thermal barrier carried on board the Space Shuttle Atlantis during mission STS-86 from September 25 to October 9, 1997. Barrier measures 11.5? i

Available to US bidders only. Flown Shuttle TCS (Thermal Control System) blanket carried on board the Shuttle Endeavour on Mission STS-77 in May 1996

Available to US bidders only. Flown Shuttle TCS (Thermal Control System) blanket carried on board the Shuttle Discovery on Mission STS-85 in August 19

Available to US bidders only. A flown section of shuttle wing insulation from one of the orbiters. Section and measures approximately 18 x 10 x 5 and

Large “Remove Before Flight” protective cover, 20.5 x 33.5, stenciled in red paint “Remove Before Flight.” Panel also bears a Rockwell International S