RR Auction: Space Exploration featuring Apollo 11

Very rare unflown 10K gold STS-107 Robbins medal, approximately 1.5? x 2?, featuring a raised design of the mission insignia on the face. The reverse

Unflown sterling silver STS-107 Robbins medal, approximately 1.5? x 2?, featuring a raised design of the mission insignia on the face. The reverse fea

Flown fabric American flag, 5.75 x 4, flown aboard the Space Shuttle Columbia during its second flight on November 12–14, 1981. Flag is attached to it

Flown cue card holder carried on Space Shuttle Columbia for STS-3 from March 22–30, 1982, 7.5 x 10.5, featuring the mission insignia in the center wit

Fabric American flag, 5.75 x 4.25, flown aboard the Space Shuttle Atlantis during the STS-30 mission. The flag is attached to its original 15.5 x 11.5

Unflown sterling silver STS-3 Robbins medal, approximately 1.5? in diameter, with a raised design on the face featuring the mission insignia. The reve

Color first edition of the STS-4 Earth orbital chart, measuring 52 x 11.75, marked in the lower right corner, "Space Shuttle Mission Chart STS-...

Unflown sterling silver STS-1 Robbins medal, approximately 1.75? x 1.25?, featuring a raised design of the mission insignia on the face. The reverse i

Unflown sterling silver STS-43 Robbins medal, approximately 1.5? x 1.75?, featuring a raised design of the mission insignia on the face. The reverse i

Unflown sterling silver STS-7 Robbins medal, approximately 1.5? in diameter, featuring a raised design of the mission insignia on the face. The revers

Unflown sterling silver STS-79 Robbins medal, approximately 1.5? in diameter, featuring a raised design of the mission insignia on the face. The rever

Unflown sterling silver STS-95 Robbins medal, approximately 1.5? in diameter, featuring a raised design of the mission insignia on the face. The rever

Early 1000 series Space Shuttle glove TMG (Thermal Micrometeoroid Garment), with an ILC-Dover tag on the interior, reading: "Item: TMG, Glove A...

Space Shuttle Cable Attenuator Strut, measuring 18.25? long and 1? in diameter, marked on the side, "Cable Attenuator Type V, Rockwell Internat...

Space Shuttle Centaur Control Distribution Unit, measuring 8.75? x 7? x 9.25?, with a Convair Division of General Dynamics tag on one side, reading:...

Unflown thermal protection tile from the first space shuttle orbiter, the Space Shuttle Columbia (OV–102), 6 x 6 x 1.25, with yellow identification nu

Space Shuttle Cryogenic Hose, featuring a braided hose mounted along a stiff bracket, measuring 9.5? long, with the plastic wrap at the end retaining

Space Shuttle Cryogenic Relief Valve, measuring 17.5? x 8? x 6.5?, mounted on a 12? x 8? board, marked: "V070-454374-001, 03953-090484." T...

Space Shuttle Electrical Interface Panel, measuring 10? x 7.75?, marked with part numbers on the reverse, "V070-703924-002 ASSY, 03953-A33949.&...

Engineering prototype of a Space Shuttle Flight Deck Ladder Adapter Assembly, measuring 5.25? x 4.75? x 5.5?, with a tag on one side, reading: "...

Space Shuttle External Tank (ET) Nose Cone Assembly complete with aerospike. The assembly represented the leading edge of the Space Shuttle/ET/Solid R

Space Shuttle Ground Test Interface Panel, measuring 19? x 8.75? x 20?, marked "Test Control" on the face, featuring 34 backlit buttons, i...

Portable leak test assembly used for testing the integrity of pressurized propellant lines on the Space Shuttle, measuring 13? x 14? x 21?, with a Roc

Light gray Space Shuttle Main Display Panel Side Air Vent Diffuser, measuring 4.75? x 3.5? x 1?, marked on the reverse with part numbers: "5 Hi...

Two pieces of brown Space Shuttle netting: one piece with dark gray snap-lined edges, measuring 49? x 9.5?, marked "V070-660549-019," with...

Space Shuttle Nose Gear Extension Mechanism with Pyrotechnic Thruster, measuring 4.25? x 12? x 3.5?, marked on the rear: "Thruster, Pyrotechnic...

Space Shuttle Radiation Detector High-Fidelity Mock-Up, measuring 10.25? x 2.75? x 5?, with one side marked: "BDX, T44430, SN-001." The mo...

Space Shuttle Reaction Control System (RCS) Helium Tank, measuring 19? in diameter, with a Brunswick Corporation tag on the side, reading: "Ves...

Space Shuttle Reaction Control System (RCS) Test Set Panel, measuring 25? x 15? x 10?, marked on the front, "C505-6 RCS Test Set." The rev...

Space Shuttle Storage Locker Prototype, measuring 9.75? x 8.75? x 5?, marked inside with part numbers: "R070-660391-001, 3 03953-B28617." ...

Two pieces of Space Shuttle thermal insulation, each measuring 6.5? x 1.5?, both sealed in plastic and marked "V070-390242-021." Sealed wi...

Large red octagonal Space Shuttle transport protective cover, measuring 11.75? x 11.75? x 2.5?, with a metal Fairchild/Stratos tag applied to one side

Light gray Space Shuttle valve panel, measuring 4.5? x 6?, with seven valve holes, labeled: "Oxygen," "H2O Supply," "LCG Su...

Half of a large hold-down stud frangible nut, measuring 2.75 x 5.75 x 4, applied to a wooden 11.75 x 9 plaque attributing it to the STS-107 launch on

Impressive dual-lens Space Shuttle Wide Field Camera (WFC) with lens hood, the main white canister camera body measuring 16? in diameter and 25? tall,

Large group of equipment associated with the Space Shuttle and Spacehab, including: Space Shuttle Solid Rocket Booster (SRB) Parachute Suspension Line

Interesting STS-67 medical kit, measuring 14 x 8 x 8, marked on the white handle as "P/N SED42103566-302, S/N 101, MEDOP ASSY." In a plast...

Official glossy 10 x 8 black-numbered NASA photo of Bob Crippen holding a mechanical device as Bruce McCandless, seen wearing his suit, and EVA resear

Beautiful color satin-finish 20 x 16 photo of McCandless floating high above the cloud-covered Earth, signed in black felt tip, "The first unte...

Gorgeous color satin-finish 8 x 10 full-length photo of McCandless performing his historic first untethered free flight, signed neatly in silver ink,

ALS, one page, 5.5 x 8, NASA letterhead, May 23, 1984. Letter to an admirer, in full: "Thank you for your letter. I have enclosed some signed p...

Official color 8 x 10 NASA lithograph of Judy Resnik posing in her blue flight suit, signed in black felt tip. Reverse bears an affixed JSA label. In

Official color 8 x 10 NASA lithograph of Ride posing in her blue flight suit in front of a Challenger model, signed in black felt tip, "Sally K...

Official color 8 x 10 NASA lithograph of mission specialist Ride wearing a polo shirt with STS-7 patch, signed in black felt tip, "Reach for th...

Scarce official NASA publication: Shuttle Performance: Lessons Learned, Parts 1 and 2 (NASA CP-2283). Washington, DC: 1983. Softcover, 8.5 x 11, total

Collection of 26 color photos of various Space Shuttle astronauts, 8 x 10 and 10 x 8, various finishes with several official NASA photos or lithograph

Space Shuttle "Backup Flight System, GN&C, Flight Control Program Requirements Document" issued by Rockwell International on October 5...

Fascinating official "Space Shuttle Technical Manual: Orbiter Crash and Rescue Information" prepared by Rockwell International, 226 pages ...

Group of five official color 10 x 8 NASA lithographs depicting Space Shuttle crews, each signed in black felt tip by the full mission crew. Includes:

Group of four cargo bay identification cards flown on Space Shuttle missions, each measuring 5.25 x 4, including two carried on the Discovery for STS-

Two official color NASA photos signed in black felt tip by the entire crew of STS-33: Fred Gregory, John Blaha, Sonny Carter, Story Musgrave, and Kath

Color glossy 10.25 x 7.75 photo of the STS-6 mission insignia, signed next to their names in black felt tip by Paul Weitz, Karol 'Bo' Bobko,...

Fantastic color glossy 8 x 10 photo of the crew of STS-6 posing as 'F Troop' cavalrymen, signed in black felt tip, "Sgt. Story Musgrave...

Two items: a black metal 12? x 9? x 7? aircraft avionics mounting frame, with an "Aux Wideband Recorder Control" switch, "Left Ear Vo...

Early 1960s Bomarc Missile Auxiliary Power Unit with parts of the metal housing cut away to reveal the mechanical innards, measuring approximately 22?

Eight-channel airborne flight recorder for an aircraft, measuring 9? x 9? x 4.75?, featuring two reels and a tape threading diagram on the face. The u

Rugged Echo Science Airborne Video Recorder used in an aircraft application, measuring 18? x 6? x 10.5?, with a tag on the exterior case reading: &q...

Nike Hercules Rocket/Missile Auxiliary Power Unit, mounted inside an 18? x 36? x 12? metal stand, with an Airesearch tag on the body, reading: "...

JPL Mars Viking Omni Antenna Mockup, measuring 19.25? long and 4? in diameter, comprising a hollow metal tube (sealed at one end) with two circular mo

JPL Mars Viking Orbiter Part, measuring 4? x 2.25? x 2.25?, with two yellow-capped ports on top labeled "Low FSK" and "High FSK,"...

Assortment of components used in the assembly and testing of the Mars Viking Orbiter spacecraft: an "Electro-Adapter," measuring 5? long a...

Two components for the Mars Viking Orbiter's solar arrays: one trapezoidal outboard hinge with a wired port for a motion sensor switch, measurin...

JPL Mars Viking Ground Support Equipment Panel, measuring 19? x 5? x 4.5?, with NASA property labels on the front, a DC microamps voltage meter, and s

Developmental ground test Mars Viking Orbiter support strut with thermal coupler, measuring 39? long, marked on the end of one bracket, "P/N 10...

Group of five color 20 x 16 educational prints detailing Earth's atmosphere and the solar system, published by the Douglas Aircraft Company in S...

Group of eight original color 20 x 16 prints of US Air Force/NASA launch vehicles by the Douglas Aircraft Company, including: the U.S. Air Force Thor

Two official Rocketdyne F-1 rocket engine "Quarterly Progress Report" publications, both with blacked-out "Confidential" marking...

Desirable group lot of 17 Beta cloth patches, ranging in size from 5.5 x 5.5 to 9 x 10, each honoring various NASA missions and milestones, including:

Collection of NASA Jet Propulsion Laboratory (JPL) slides and negatives, including the Mariner program, historical info on the JPL and its programs, e

Vintage NASA lunch tray with a 'meatball' logo in the upper left, 18? x 14?, manufactured by Camtray, Cambro Manufacturing Co., Huntington B...

Intriguing spiral-bound period copies of Northrop memos and documents related to the "Octave II First Flight" and "Project 25," ...

Uncommon book: Stability and Dispersion Analysis for Rockets and Projectiles by Matthew S. Smith. Privately printed, 1970. Hardcover, 8.75 x 11.25, 16

Gold-plated Agena Rocket Engine Cold Gas Thruster Housing, measuring 6.75? x 5? x 5?, designed as a tube with a perpendicular can-shaped compartment.

AIT Solar Array featuring five spring-loaded solar panels, measuring 17? x 43? x 3.5?, marked with part numbers, "11982-D122715-1, A1 MFR 9K893...

Atlas Launch Computer Ground Amplifier, measuring 9.5? x 4? x 14.75?, marked at the top, "16-6H Dual D.C. Amplifier," with a US Air F...

Atlas Rocket Engine Oxidizer Hose, comprised of a braided metal hose measuring 10? long, with a wraparound metal tag reading: "W.P. 60 PSIG, Sp...

Atlas Rocket Fuel Pressure Regulator, measuring 10.5? x 9? x 9?, with a B. H. Hadley tag on the side, reading: "Regulator Assembly-Fuel, Oper. ...

A spring-loaded deployable satellite antenna inside a metal cylinder, measuring 7? long and 2? in diameter, marked "442935-1, 61349" on th...

Group of four unused fecal/emesis bags, each folded to 6.5? x 6.25?, marked: "Buyer's Control No. MC282-0069-0002, G.E. P/N 47A232804P1.&qu...

Group of three pieces of flight test program instrumentation involved in a photo reconnaissance program (possibly SR-71), believed to have originated

Guidance/Inertial Measurement Unit (IMU) Test Panel, measuring 19? x 7? x 10?, with a Litton Aero Products Test Equipment tag on the left side, readin

Prototype high pressure rocket test hardware, measuring approximately 19? x 12? x 10?, with the main black sphere bearing a white Tavco, Inc., label,

Kinelogic Analog/Digital Flight Recorder for an unknown satellite application, measuring 7.5? x 9? x 9?, retaining tape spooled in its reels. A worn p

Launch Vehicle Command Destruct Receiver manufactured by ARF Products, measuring 5? x 4.25? x 2.75?, identified on the face: "Receiver, Command...

Turbine generator for a Polaris submarine-launched ballistic missile, measuring 10? long and 5? in diameter, with a US Navy/Convair label on the end,

Gyroscope for a Polaris submarine-launched ballistic missile, housed in a blue 4.75? x 3.75? x 3? case with attached black 23? cable, featuring a Sand

S-49 Satellite Gegenschein Experiment Electronics module, measuring 7.5? x 8? x 6.5?, with a tag applied to one panel: "Gegenschein Photometry,...

Satellite Battery Pack Assembly, measuring 8.5? x 11? x 6? and weighing approximately 37 pounds, featuring a TRW Systems tag on one end, reading: &q...

Group of five satellite components, believed to be retention mechanisms for storage of solar panels during launch and subsequent release when on orbit

Satellite Helium Regulator Assembly used for spacecraft attitude control, measuring 20? x 10? x 9?, with a wraparound Fairchild Hiller/Stratos tag on

Group of three structural components from an unidentified satellite, including: a 28? x 18.75? rectangular metal grid lined with screw holes, marked o

Spacecraft Heater Redundancy Test Unit Patch Panel, measuring 17? x 17?, with a plate reading "Heater Redundancy Test Unit" at the top. Th...

Very rare JPL Surveyor Lunar Lander Propellant Pressurization Tank for the RCS System, measuring 9? in diameter with valves on one side, engraved on t

Weather Satellite Sensor Cold Reference, measuring 22? x 12? x 20?, featuring silver insulation on the exterior. The rear panel opens to reveal a mirr