RR Auction: Space Exploration Auction

Metal pole section attested to as being cut from a light pole fixture assembly at Kennedy Space Center Launch Complex 39A. The metal piece measures ...

Souvenir card produced by BA Commercial Corporation, 8.5 x 3.5, containing a 1.5 x 1 swatch of woven ceramic fabric as used to protect the Space Shutt

Ground support equipment affiliated with the Space Shuttle, including three fittings with circular openings (inner diameter of 2.5˝) and two s...

Signed book: The NASA Northrop T-38: Photographic Art from an Astronaut Pilot. First edition. Published by Lannistoria in 2009. Hardcover with dust ja

Two commemorative covers with color cachets honoring the Space Shuttle Challenger and STS missions 8 and 11 (41-B), postmarked on either the mission l

Amazing red-and-white laminated NASA Headquarters access badge, 2.75 x 3.75, issued to Neil Armstrong for his investigation into the STS 51â...

TLS as president, one page, 7 x 10.5, White House letterhead, June 19, 1986. Letter to Neil Armstrong, expressing gratitude for his service as vice ch

Commemorative cover with a stamped cachet honoring a "Space Shuttle Mission Simulation Training Test" at the Lyndon B. Johnson Space Cente...

Rare and beautiful example of an Extravehicular Mobility Unit (EMU) prototype helmet for the Space Shuttle program. The blow-molded Polycarbonate helm

Space Shuttle Centaur Inertial Upper Stage Computer Unit Assembly, measuring 16.5″ x 15″ x 7″,...

Flight-ready Space Shuttle Teleprinter (flight history unknown), measuring approximately 17″ x 20″ x 10â...

Attested to as flown by Astrotech—Spacehab module storage locker, 18.5 x 11.5 x 25.75, with the McDonnell Douglas inventory tag af

Solar array carrier isolator intended for application in the Space Shuttle Payload Bay as part of the cradle assembly that retained the Hubble Space T

Desirable flight qualification test article of the Space Shuttle's Extra Vehicular Activities Infra Red (EVA IR) Camera, identical to those that...

Export restricted (ITAR), sale only to US Citizens and Organizations. A pair of High-Temperature Reusable Surface Insulation (HRSI) tiles designed for

Impressive early Multiplexer / DeMultiplexer (MDM) used for testing in the Space Shuttle and Space Station Command and Data Handling system design. Th

Display plaque featuring two varieties of an "electronic timer for spacecraft timing and recording operations," measuring 12˝ x 10&#...

Interesting collection of sixteen "Space Shuttle Rocket O-Ring Samples," affixed inside a 17˝ x 11.5˝ box, all with identifica...

Remote control unit for use with the Space Shuttle Payload Deployment & Retrieval System (PDRS), measuring 10˝ x 7.75˝ x 12˝, ...

Interesting ground support equipment from the Space Shuttle program: a "Shuttle Television System Command Simulator Test Set," housed in i...

Export restricted (ITAR), sale only to US Citizens and Organizations. Rigid high-temperature insulation assembly used in the wings of the Space Shuttl

Export restricted (ITAR), sale only to US Citizens and Organizations. Rigid high-temperature insulation assembly used in the wings of the Space Shuttl

A stainless steel fuel filter, 5.25˝ in length and 1.5˝ in diameter, with end taped and a parts label stamped on its side: â€...

Space Shuttle EVA Disposable Urine Collection Device (UCD), manufactured by Boeing Aerospace, with an identification patch sewn to the device, reading

Space Shuttle Solid Rocket Booster Developmental Flight Instrumentation Distributor, measuring 16.5˝ x 16.5˝ x 8˝, with United Tec...

Space Shuttle-era rack-mountable centrifuge for a Low Gravity Stress Analysis Experiment at Johnson Space Center, measuring 19˝ x 1...

Space Shuttle Enhanced Life Preserver Unit (ELPU) developed by Mustang Survival/Meta Research to address the in-water mobility deficiency experienced

Separation nut and bolt affiliated with the X-38 Crew Return Vehicle (CRV), evidently a modified variant of the Space Shuttle Solid Rocket Booster Par

iRED (Interim Resistance Exercise Device) squat support bar attested as flown and used on the International Space Station, measuring 33˝ in le...

iRED (Interim Resistance Exercise Device) load bearing plate assembly intended for flight (flown provenance undetermined) on the International Space S

Narda Electromagnetic Radiation Monitor (Model 8616) from NASA's Johnson Space Center, measuring 4.5˝ x 10.5˝ x 6.5˝, with NAS...

Adimec 1600m CCD camera acquired from Johnson Space Center as NASA surplus, complete with its Fujinon 1:1.4/25mm CF25HA-1 lens. The camera bears an af

Adimec 1600m CCD camera acquired from Johnson Space Center as NASA surplus, complete with its Fujinon 1:1.4/25mm CF25HA-1 lens and modified with an el

Large Multi-Layer Insulation (MLI) thermal blanket from Boeing, measuring approximately 45.5˝ x 44˝, with sewn-on part identification ta...

Group of slider-grip Ziplock bags from the NASA food lab at Johnson Space Center, sealed in a plastic bag with attached JSC Project Parts Tag with var

ISS Expedition 67 flown cover carried to the International Space Station, signed by seven including the crews of Dragon Crew-4 (Kjell N. Lindgren, Rob

Axiom Mission 1 flown cover carried to the International Space Station, signed by 12 including the crews of Dragon Crew-4 (Kjell N. Lindgren, Robert H

Massive Bell Aircraft XLR-67-BA-1 liquid propellant rocket engine from the late 1950s, mounted on a 56” x 40” wheeled sled...

Export restricted (ITAR), sale only to US Citizens and Organizations. Apollo-era Marquardt R-4D rocket engine designed and tested for application as a

Export restricted (ITAR), sale only to US Citizens and Organizations. Circa 1958 subscale test version of a liquid-fueled rocket engine, measuring app

External rudder control actuator from a German V-2 (A4) rocket, circa 1942–1945, measuring 8˝ x 5.5˝ x 6˝ plus ...

Export restricted (ITAR), sale only to US Citizens and Organizations. Visually appealing roll control thruster assembly affiliated with the Polaris/Po

Atlas Launch Vehicle Propellant Utilization (PU) Unit, measuring 11˝ x 8˝ x 4.5˝, with a Convair label on the side: "Propella...

Report entitled "Missions and Flight Operations for Nuclear Rockets" by Herbert Radd, bracket-bound in its original Lockheed Missiles &...

Desirable spacecraft thruster valve made by Moog, Inc., measuring 2.5˝ x 2.5˝ x 1.75˝, with the manufacturer's label on the bo...

Titan II SLV accelerometer assembly, measuring approximately 1.75˝ in diameter and 1˝ tall with short wiring cables attached, with a Del...

Small 1˝ x 1˝ piece of rusted metal fragment attested to as being removed from a flown-captured German V-2 rocket that was test-launched...

Special commemorative cover with a cachet and gold sticker honoring the 50th anniversary of the Bumper 8, the first rocket launch from Cape Canaveral,

Interesting spacecraft or aviation valve assembly built by Stratos, 6˝ x 7.5˝ x 6˝, with affixed Stratos/Fairchild Hiller plate: &...

Export restricted (ITAR), sale only to US Citizens and Organizations. Scarce R-6C attitude control bipropellant satellite engine manufactured by Kaise