Premiere Collector's Firearms Auction

Manufactured in 1924, after WWI Mexico procured an unknown number of Model 1911 pistols made by Colt. These Model 1911 pistols are rare because of Mex

Acquired in 1941, this pistol was one of 500 purchased by the Argentine Naval Commission in order to supplement the Model 1927 45's they were pr...

Manufactured in 1933. The left side of the slide is marked with the two line Hartford address/patent dates (1897 to 1913). The right side of the slid

The left side of the slide is marked with the two line Hartford address/patent dates (1897 to 1911) with the circled Rampant Colt behind the serration

This is an example of an Argentine contract Government Model manufactured between 1914 and 1948 to supply the Argentine Government with .45 caliber se

It has the correct offset receiver markings with "U.S. / REMINGTON / MODEL 03-A3" on the left side and the right side has the serial numbe...

Blade front and adjustable aperture rear sights, with a "6-43" dated Smith-Corona barrel and standard receiver markings. Blue and parkeriz...

Blade front and adjustable rear sights, Winchester marked barrel, Type III barrel band, round blued bolt, button safety, "W" magazine catc...

Blade front and adjustable rear sights, with "R/ 1 - 18" barrel and standard markings on the receiver ring. The safety and bolt catch are ...

A) Produced in October of 1943. Standard sights, with Battle Range drum and locking bar. Springfield barrel, dated "8-43", Springfield bol...

A) Standard commercial markings with "RLB / [ordnance bomb]" on left receiver side. 2 3/4" chamber, choked marked "IMP CYL"...

"NOW...ALL TOGETHER" 7th War Loan poster by C.C. Beall, circa 1945 (see image). Professionally matted in a 31 1/2 inch x 42 1/4 inch frame...

"AND THEY / THOUGHT WE COULDN'T FIGHT" Victory Liberty Loan poster by Clyde Forsythe, circa 1917 (see image). Professionally matted in...

1) "ENLIST TODAY / U.S. MARINES" poster with Cleveland, Ohio recruiting address (see image). Image by Bruce Moore and is 18 inch x 26 inch...

1) U.S. Navy Gregory Sportswear Inc. G-1 flight jacket size 42 with military specification number "MIL-J-7823D(WEP)" (circa 1960s). Squadr...

This is an example of a late WWII M1A1 Carbine manufactured by the Inland Manufacturing Division of General Motors fitted with an original GI paratroo

Post war production, with "NI-C" and "DRC" adjustment drums, "12 54" dated Springfield barrel, "HRA" bolt an...

Blade front and 2-leaf rear sights, with the barrel marked "BUFFALO ARMS/ bomb/ 8-1943". Fitted with a Type I barrel band, flat top bolt, ...

Hooded blade and folding ladder sights, with a "12-41" dated Remington barrel and "R" marked bolt, trigger guard, bolt shroud, a...

Blade front and adjustable rear sights, with "8-44" Inland barrel, Type II barrel band, round bolt, milled trigger guard, button safety an...

Produced as a Model 1922 MI, and later converted to MII which included installing an early NS, M2 bolt. The receiver ring has the standard M1 marking

Produced in Geneseo shortly after they acquired the tooling from Decine, Texas plant. Blade front sight and "NM" rear sight with adjustabl...

Blade front and 2-leaf rear sights, with a "2-43" dated Underwood barrel, Type I barrel band, flat top bolt, milled trigger guard, button ...

Blade and ladder sights, with Springfield barrel dated "1-38", standard receiver markings. Mounted with a smooth stock with a boxed "...

Blade front and 2-leaf rear sights, Winchester marked barrel, Type I barrel band, flat blued bolt, button safety, "W" magazine catch and r...

A) Early commercial procurement with standard commercial markings along with "U.S. [ordnance bomb]" on the left receiver side and on top o...

Approximately 8,000 of these revolvers were produced in 22 caliber from 1949 to 1952. This example has target sights and a custom engraving. Scroll an

Manufactured in 1932. The top of the barrel is marked with the two line address/ 1884, 1905 and 1926 patent dates, the left side is marked "COL...

According to the included factory letter, this revolver was part of a 2-gun order shipped to the Lawlor Sporting Goods Company of Lincoln, Nebraska on

This is an excellent example of an original unaltered Colt New Service revolver as manufactured in 1913. This revolver has the desirable flat top fram

Manufactured in 1909. Replacement brass blade front and windage adjustable rear sights, the barrel has the standard two line address/ 1884, 1900 and 1

A) Made in 1967. Fixed sight and standard markings, with Colt medallions on the checkered grips. BBL: 4 inch round Stock: Gauge: 38 Finish: b

A) Manufactured in 1922. Blade front and notch rear sights, with the two line address/patent marking on top of the barrel, "COLT ARMY / SPECIAL...

A) Manufactured in 1950. Blade front sight adjustable for elevation and rear sight adjustable for windage with standard markings and checkered walnut

A) Manufactured in 1944. Standard two line Hartford address/patent dates marking with "Official Police" markings on left side. Rampant Col...

A) Manufactured in 1921. Fixed sights, standard markings and checkered grips featuring "COLT" in an oval at the top and "C" arou...

Introduced in 1957. Ramp Patridge blade front and adjustable rear sights. Barrel is fitted with a muzzle brake, with the standard markings on the side

Introduced in 1957, this pistol features a ramped Patridge front and adjustable rear target sights, standard markings, 10 round magazine, cocking indi

A) Manufactured in 1980. Standard markings and features with a trigger shoe. Complete with the original box numbered to the gun and papers. BBL: 8-3

Features a ramp Patridge front sight on a matte finished top with an adjustable notch rear sight. Standard markings and equipped with a muzzle brake a

A) Manufactured circa 1955. Standard barrel and frame markings with 5 screws, Patridge front and adjustable rear target sights, wide checkered target

A) Manufactured from 1957 to 1982. standard slide and frame markings, blade front and adjustable rear sights, S&W marked blue magazine and fitte...

A) Manufactured after 1969, with red insert ramped front sight and white outlined micrometer click adjustable rear sight. Built on the square butt, N-

A) Built on the square butt L target frame, this features a red ramp front sight with an adjustable rear sight. Standard barrel and frame markings in

A) Introduced in 1985 and manufactured until 1988 using the square butt N frame. Features a ramp front sight with an adjustable rear sight on a matte

A) Features front ramp sight, adjustable rear sight, a six round fluted cylinder, casehardened checkered hammer, and a smooth casehardened trigger. Ch

A) Features a red insert ramp front sight with micrometer target rear sight. Standard barrel markings, fluted six round cylinder, checkered target ham

A) Standard markings and features. Includes a wooden display case with a Texas Ranger Commemorative knife numbered to gun along the spine. BBL: 4 i

A) Manufactured after 1969, with red insert ramped front sight and white outlined micrometer click adjustable rear sight. Casehardened checkered hamme

A) Manufactured between 1977 and 1978, with ramped Patridge front and adjustable rear sights. The right side of the barrel is marked "45 CAL. M...

A) Featuring a red insert ramp front with white outlined adjustable rear sights, casehardened target hammer and trigger, and standard markings. Fitted

This revolver is a 50 year anniversary commemorative edition for the Model 29. It is built on 4 screw N frame with a pinned front ramp sight with adju

A) Fixed serrated front ramp sight and adjustable rear sight, on matte rib and top strap. Checkered target hammer and serrated target trigger, six-sh

A) Red insert ramped front sight and white outlined micrometer click adjustable rear sight. Built on the square butt, N-Frame, with casehardened check

A) Manufactured in 1998 for distribution by Lew Horton, only 300 of these were made. Built on the round butt N frame, it features a red insert ramp fr

A) This model was the first L frame design chambered in .44 Special. Features a red ramp on a ramp base front sight with micrometer click adjustable r

A) Red ramp front sight on a matte ribbed, ported barrel paired with an adjustable white outline rear sight. Standard barrel and frame markings, caseh

A) Produced between 1983 and 1991. 4-position adjustable blade front and micrometer target rear sights. Solid ribbed barrel with standard markings. Fe

A) Red ramp front sight, adjustable white-outline rear sight, checkered target hammer, serrated trigger, and checkered target grips with S&W med...

A) Red insert ramp front sight and micrometer rear sight. Solid rib barrel features standard markings. Casehardened checkered hammer and serrated trig

A) This revolver features a heavy barrel, ramp front and rear notch sights, 6 round fluted cylinder, and a combat trigger and checkered hammer, both a

Introduced in 2003. Fixed blade front and adjustable rear sights, with ported barrel, 5-round cylinder, integral lock, smooth trigger and textured Smi

A) Fixed blade front sight with red insert and adjustable rear sight, checkered target hammer, serrated trigger, and fitted with rosewood service grip

Pinned front Patridge sight with gold bead on a matte rib with adjustable white outline rear sight. Exhibits a fluted 8 round cylinder, wide checkered

A) Fixed blade front sight with red insert and adjustable rear sight, checkered hammer, serrated trigger, internal lock mechanism, and diamond checker

Produced between 1997 and 2001. Accented ramp front sight on a solid rib, ported barrel and adjustable white outline target sights. Top of barrel has

A) This four screw design revolver features a ramp front sight with red insert and adjustable rear sight, checkered wide hammer, serrated trigger and

A) Flattop frame with adjustable blade front and adjustable rear sights. Standard markings including "OFFICERS MODEL 38 / HEAVY BARREL" on...

A) Introduced in July of 1964, features a fixed ramp front sight and notch groove rear sight. Matte finished top strap, casehardened trigger and hamme

A) Features a fixed raised ramp front sight with a red insert and adjustable rear sight. Standard markings, serrated trigger, wide checkered hammer, a

A) Manufactured from 1988 this revolver features fixed sights, a checkered hammer, smooth trigger, a six round fluted cylinder, and checkered grips wi

A) Standard markings, ramp front sight, adjustable rear sight, casehardened trigger and hammer. Fitted with checkered two piece grips with S&W m...

Features a fixed front sight on a solid rib barrel with an adjustable rear sight on the frame. The left side of the barrel is marked "SMITH &am...

A) Features a pinned half moon front sight, frame notch rear sight, a dark casehardened hammer and trigger, and fancy checkered grips with S&W m...

A) Built on the N frame model, this revolver features a raised ramp sight with red insert, adjustable rear sight, fluted six round cylinder, checkered

A) Manufactured in 2001 as a tribute to Ed McGivern who set many world records in the 1930's. This revolver commemorates his speed records that ...

A) Manufactured in 2001, this four screw modeled revolver with a matte blue features a pinned half moon front sight with groove notch rear sight. Fitt

A) Standard markings and features. Complete with Heritage Series box. BBL: 6 1/2 inch round Stock: Gauge: 44 S&W special Finish: blue/c...

Equipped with pinned front ramp sight with red insert, white outline adjustable rear sight, checkered target hammer, smooth trigger, and one piece fin

A) Featuring a red insert ramp front with white outlined adjustable rear sights, casehardened target hammer and trigger, and standard markings. Fitted

A) Pinned front ramp sight on a matte rib barrel with adjustable rear target sight. Features a checkered hammer and smooth trigger, both casehardened.

K Target frame 4 screw model. Features ramped Patridge front sight, adjustable rear sight, checkered target hammer, and serrated trigger. Fitted with

A) Manufactured in 2001 to commemorate famous speed shooter, Ed McGivern. The round barrel is fitted with a pinned Patridge sight with a gold bead and

A) Ramp front sight with red insert, adjustable white outline rear sight, casehardened hammer and trigger, serrated back strap, and two piece checkere

A) This four screw model revolver is fitted with a round, a pinned front Patridge sight with gold bead, adjustable rear sight, serrated hammer, and sm

A) One in a series of limited production revolvers built by the S&W Performance Center produced for Lew Horton Distributing Company. Features a ...

A) Standard features of the Black Powder Series with special Type "B" scroll engraving over the barrel, loading lever, frame, cylinder, ha...

A) Standard markings, features a blue finished barrel, fluted cylinder, and back strap. Loading lever, frame and hammer are casehardened. Fitted with

A) The revolver features standard markings, blue barrel and cylinder, with the frame and loading lever casehardened. Left side of barrel is marked &...

A) Standard markings and features, with commemorative case with a flask, bullet mold, nipple wrench and empty cap tin. BBL: 7 1/2 inch octagon Sto

A) Standard markings and features of the Black Powder series Walker with gold inlays of S. Walker & S. Colt on the barrel. Commemorative banner ...

Standard heritage commemorative markings and features, with commemorative case. BBL: 9 inch part octagonal Stock: Gauge: 44 Finish: blue/case

A) Standard markings and features. This gun also has the original Black Powder Series box numbered to gun and Colt display case. BBL: 7 1/2 inch ro

A) Standard markings for the Black Powder Series Walker. Complete with original box and shipping box numbered to the gun. BBL: 9 inch part octagona

A) Standard markings and features. Also with original Black Powder Series box numbered to gun. BBL: 7 1/2 inch round Stock: Gauge: 44 Finish:

A) Standard markings and features for the Black Powder Series. Complete with original box numbered to gun. BBL: 4 inch octagon Stock: Gauge: 31

A) Standard markings and features with Sam Colt signature on back strap. Complete with original box, manual and a white shipping carton numbered to gu

A) Standard markings and features with silver plated trigger guard and back strap. Complete with a brown Colt box and Colt case with blue velvet linin

A) Standard Black Powder Series markings with blue barrel and fluted cylinder, casehardened frame and loading lever, and brass trigger guard and front

A) Stainless steel finish for all parts of the revolver. Standard markings and features. Also has the original Black Powder Series box numbered to gun