Premiere Collector's Firearms Auction

A) The Pre-Woodsman Model was manufactured from 1915 to 1927 and prior to the "Woodsman" name. This particular pistol was manufactured in ...

A) Manufactured in 1969. Marked "WOODSMAN" on the left side of the frame underneath the Rampant Colt, Hartford address on left barrel sid...

A) Manufactured in 1950. Marked "MATCH TARGET" under the Rampant Colt on left side of frame, two line Hartford address on left barrel side...

Manufactured from 1958 to 1963 as part of the Model 102 series. Patridge ramp front and full adjustable rear sights on a barrel with ribbed sides, det

This is a nice example of a factory engraved High Standard pistol done by Mike Gouse. The sides and top of the barrel, frame sides, sides and top of t

A) Produced in 1950, only 1200 were made overall. Partridge blade front and adjustable rear sights, with standard markings. Equipped with a takedown l

A) Introduced in 1945. This pistol features floral scroll and punch dot background engraving on the barrel frame, slide and back strap done by High St

A) Introduced circa 1945. Fixed blade and adjustable notch rear sights with a heavy barrel and standard markings. Fitted with checkered walnut grips.

Discontinued in 1962, the Dardick combined a fixed in-grip magazine with a 3-chamber open sided cylinder to feed the proprietary "Tround",...

Manufactured in Belgium from 1970 to 1974. Adjustable target sights and gold washed trigger. The breech side of the barrel, slide, and front strap ar

This is a rare presentation/display Gyrojet pistol. These pistols were produced in the mid to late 1960's and was actually used in an early Jame...

Manufactured by FN between 1962 and 1974. Patridge front and adjustable rear sights, with a serrated gold trigger, combination safety switch/ dry fire

Introduced in 1963. Chambered in the 221 Rem Fireball caliber, standard markings, blade front and adjustable rear sights, equipped with a Simmons 2.5X

Standard markings, with blade front sight and fully adjustable rear sight, receiver grooved for scope mount and adjustable weights below barrel. Check

Patridge blade front and fully adjustable rear sights, receiver grooved for scope mount and adjustable weights below barrel. Standard markings, with a

Manufactured by FN between 1962 and 1974. Patridge style front sight and an adjustable rear sight. Serrated gold trigger. Smooth forearm and checkered

Constructed from 3/8" carbon steel stock, 11" blade with sharpened back clip and the scimitar flanked Randall marking on the left side. Du...

Nine inch carbon steel clip point blade of 1/4" stock with sharpened clip, serrated thumb rest and the scimitar flanked "RANDALL MADE"...

Both knives bear the standard Randall markings, with brown leather JRB sheaths. 1) Randall Model 10-7 Salt Fisherman/ Household Utility knife, 7&quo...

Both knives have 6" drop point blades with thumb serrations and standard markings, single quillion guards and brown leather Randall sheaths wit...

All three knives have single quillion German silver guards and brown leather Randall JRB sheaths, and except as noted have standard markings and carbo

Nine inch carbon steel clip point blade of 1/4" stock with 3 1/2" sharpened back clip, and the scimitar flanked Randall marking on the lef...

1/4" carbon steel blade, 7 1/2" long with 3" sharpened clip, with the two line scimitar flanked Randall markings on the left side. Th...

Both knives have carbon steel blades with standard markings, brass dual quillion guards, plastic spacers and brown leather Randall JRB sheaths with sh

1/4" thick, 6" long carbon steel drop point blade, with the Randall markings on the left side. Brass single quillion guard and Duralumin p...

Produced from 1/4" carbon steel, 6" drop point blade with thumb rest, 2" sawblade on the spine, Randall markings on the left side and...

Both knives have 7 1/2" drop point blades with thumb serrations and standard markings, single quillion German silver grips, plastic spacers, an...

This is a limited edition of 1,000 manufactured in Japan, this auto 5 features a blue barrel and coin finish receiver. The receiver is rolled in a flo

This is a two barrel set Winchester Parker DHE shotgun. 26 inch long 20 gauge barrel with solid rib, single bead sight, 2 3/4 inch chambers, chokes ma

Remington's forst model of over and under shotgun, with only 5100 produced from 1931 to 1944. Features dual bead sights on a vent matte rib, 2 3...

Manufactured form 1963 to 1987. Dual ivory bead sights, 2 3/4 inch chambers, single trigger, and tang mounted safety/selector. The lower barrel is thr

Manufactured in Japan, features a single bead mount (bead absent) front sight on a solid matte rib, chambered 2 3/4 inch, chokes marked improved modif

Ported vent rib barrel with ivory front bead and bright center bead sight. Features 2 3/4 inch chamber, improved cylinder choke, single trigger, and t

A) Introduced in 1963. Single bead front sight on a vent rib, chambered for 3 inch shells plastic only, choked full, and standard markings with the si

A) Standard markings and features with 2 3/4 inch chamber, screw-in choke, rubber recoil pad, length of pull is 13 3/4 inches. Complete with choke too

A) Dual bead sights on a matte vent rib with 3 inch chamber and choked modified. Standard barrel and receiver markings. Fitted with a checkered beaver

Manufactured circa 1889. Single bead sight on a concaved solid rib marked with the one line Parker address and "DAMASCUS STEEL". 2 3/4&quo...

Single bead sight 2 3/4 inch chambers, choked full/improved modified, ejectors. The casehardened action is scroll engraved with an Irish Setter on poi

Excellent example of a field grade shotgun. Single bead sight, 2 3/4 inch chambers, choked full/full, extractor, double triggers, and tang mounted saf

Manufactured from 1911 to 1946. Dual ivory bead sights, choked improved modified/modified, extractor, double triggers, and tang mounted automatic safe

Desirable, Grade I factory engraved Ithaca 20 gauge shotgun, manufactured from 1908 to 1926. Single bead sight, choked improved modified/full, with ej

Despite being offered as a production gun, actually it was a hand built custom made shotgun. From 1931 to 1959 it was considered a production line gun

Blade front sight with matte sight groove, choke marked "FULL" with the standard address and patent markings on the barrel. The receiver i...

Single bead front sight with 2 3/4 inch chamber and choke marked modified. Winchester oval proof stamped at breech end of barrel and receiver. Matchin

Manufactured from 1936 to 1959. Dual bead sights on the solid rib, chambers measure 2 3/4", chokes marked "WS-2" and "WS-1"...

Manufactured in 1959. Single bead front sight, 3" chamber, choked full. Standard markings including the Winchester oval proof on top of the bar...

This is a custom order Trap shotgun from the Winchester Custom Shop. It features a red bead front and steel bead sight on the matte vent rib. The left

A) Manufactured in 1958. Single bead front sight, 2 3/4" chamber, marked choked full. Standard markings, including the Winchester oval proof on...

A) Manufactured circa 1955. Double bead sights on the matte rib, standard markings on the left rear of the barrel as well as the circled "W&quo...

Fluted barrel manufactured without sights. Mounted with a Leupold 3-9 scope. Standard markings, hinged floor plate, and one-piece synthetic pistol gri

Hooded ramp sight, adjustable leaf rear sight, and drilled and tapped top of receiver. Standard markings including "-SUPER GRADE-" on the ...

A) Manufactured in Japan. Barrel manufactured without sights and equipped with a Leupold 3x9 Vari-X Iic scope with rubber lens caps. Standard marking

A) Fluted barrel manufactured without sights, Weaver 4X-16x42 scope with Butler Creek flip-up lens covers, standard markings and mounted with a one-pi

A) Ramped dovetail front sight with hood and no rear sights, with BSA Optics 4-16x40 scope, Ironsighter scope mounts. Standard markings, with floral a

Silver blade ramped front sight, one fixed and one folding leaf rear sight, and a Lyman adjustable peep sight attached to the left rear of the receive

Ramp front and folding leaf rear sights. The action is the Roller-delayed paramilitary type with scope rings attached to the top of receiver. It featu

Manufactured in Austria. The top of the chamber is marked "MADE IN AUSTRIA / Original / Mannlicher / Schoenauer / Mod. 1950 / KAL. 257 Ro"...

K98 action, Hermann Schneider marked barrel with ramped blade front sight and fixed iron rear sight. The chamber markings have been replaced with a ma

Standard markings, ramped blade front and fixed rear sights and features, with Leupold Vari-X III 1.5x5 scope with Bushwhacker yellow tinited lens cov

A) Manufactured in Finland. Tapered barrel manufactured without sights, Weatherby Imperial 4x81 scope with leather lens covers, hinged floor plate cus

Manufactured in Finland. The medium weight barrel is manufactured without sights. The receiver has scope mounts installed. Polished bolt, with blue fi

Manufactured in Japan, with barrel made without sights and standard markings. Equipped with a Redfield 3x-9x Tracker scope. Checkered pistol grip stoc

Tapered barrel manufactured without sights, fluted bolt and equipped with a Redfield scope base. One piece walnut stock with skip line checkering, con

Ported barrel manufactured without sights, with the standard markings on the barrel and receiver, and Redfield style scope rings and bases. Hinged flo

Manufactured in Japan, with barrel manufactured without sights and equipped with a Bushnell 4x Banner scope. Checkered pistol grip stock with raised c

Manufactured in Japan. Standard markings, tapered barrel made without sights, receiver mounted Simmons 3x-9x40 scope. Hinged floor plate, serrated tri

Manufactured in 1973. Broadway vent rib barrels with two beads. Choked full and improved modified, 2 3/4 inch chambers. Bottom of engraved action is m

Manufactured in Belgium in 1967. Features dual ivory bead sights on a vent rib with standard markings on barrel. Grade I engraving on receiver with ...

Single barrel features a high visibility front sight and steel bead mid sight on a matte vent rib. Chambered for 2 3/4 inch or 3 inch shells. Features

Manufactured in Belgium circa 1969. Single bead sight on vent rib, 2 3/4 inch chamber, choke marked modified (**). The action is engraved with a light

Manufactured in 1966. Broadway vent rib barrels with two ivory beads. Choked full and improved modified, 2 3/4 inch chambers. Bottom of engraved actio

Manufactured in 1958, this shotgun features a single bead front sight on a matte vent rib barrel chambered 2 3/4 inches, choked full and modified. Sta

Barrel features dual bead sights on a vent rib barrel, chambered for 2 3/4 inch shells and choked modified and improved cylinder. Single selective gol

Made in Italy from 1972 to 1980. Single bead sight on vent rib, 2 3/4 inch chambers, choked modified/full, ejectors. Extensive floral scroll engraved

Introduced in 2001, manufactured in Italy. Single ivory bead on vent rib barrels, choked improved modified and full with 2 3/4 inch or 3 inch chambers

Manufactured in Italy, imported by Benelli U.S.A. Corp. Features a single bead sight on a vent rib barrel chambered for 2 3/4 inch or 3 inch shells, c

This shotgun was custom crafted for Ithaca by SKB. Double bead front sight on a matte vent rib, choked skeet and skeet, with 2 1/2 inch chambers. Gold

A) Dual bead sights, choked full and improved modified, 3 inch chambers with ejectors. Floral engraved receiver, checkered forearm and pistol grip st

Introduced in 2004, features a rear bead and front Truglo sight on a ported barrel, chambered 2 3/4 inch, invector plus choke system (modified, improv

Dual bead sights on a vent rib, 2 3/4 inch chambers, chokes marked skeet/skeet, ejectors. Standard markings and light scrollwork on the action and tri

Dual bead sight on a vent rib barrel, chambered for 2 3/4 inch or shorter, choked full, and auto ejectors. Barrel is marked "SPECIAL TRAP"...

Single brass bead on a matte vent rib, 3 inch chambers, both barrels skeet choked, and automatic ejectors. Standard markings, single trigger, and tang

Dual bead sight on a vent rib barrel, full choke, 2 3/4 inch chamber, and auto ejectors. The breech end of barrel and the receiver feature a full scro

A) Single bead sight on a vent rib barrel and features automatic ejectors, single smooth trigger, and tang safety/selector. Blued receiver with standa

Manufactured from 1931 until 1949 featuring a front and mid ivory bead sight with improved modified choke. Standard barrel and receiver markings with

Made from 1935 to 1949. Dovetail front, tapped for sight mount at the breech, and lyman peep sight. Scroll and punch dot engraved receiver with rabbit

A) Vent rib barrel, single bead front sight, framed marked Remington model 1100. Chamber 2 3/4 inch and choked modified. Standard checkered forearm an

A) Single bead sight on matte vent rib, standard markings, chambered 2 3/4" or shorter, choked skeet with a Pachmayr White Line vented recoil p...

A) Single steel bead sight , chambered for 2 3/4" or shorter with modified choke. Standard markings and fitted with a checkered forearm and pis...

Ivory bead front and nickel mid sights on the high matte trap vent rib, standard makers marks on the top of the barrel at the breech with "XTRA...

Single bead sight on a solid rib, 2 3/4 inch chambers, choked modified/improved cylinder, ejectors. The left side of the upper barrel is marked &quo...

Manufactured in Japan, this shotgun features standard markings, a single bead front sight, 2 3/4 inch chambers, tang safety selector, gold washed trig

Double bead sights on a vent matte rib. Both barrels chambered for 2 3/4 inch shells and skeet choked. Receiver and trigger guard features a floral sc

Manufactured circa 1931 in Belgium. Plain barrel with a single ivory bead on a rifle style front ramp, standard barrel markings and proofmarks, choked

Manufactured in Belgium, with the standard barrel markings and lightly engraved receiver. Dovetailed blade front sight and adjustable rear folding sig

Japanese production, introduced in 1997. Blade front and adjustable notch rear sights, with the standard markings on the barrel and an engraved receiv

Manufactured in Japan. Blade front sight with gold bead and folding leaf rear sight. Barrel is drilled and tapped for sight mounts. Receiver is floral

Introduced in 1997 and produced in Japan. Blade front and adjustable notch rear sights, with the standard markings on the barrel. Smooth walnut stock,

Introduced in 2008. Features a straight-pull, bolt-action and manufactured with no sights. Standard markings, gold washed trigger, and upper tang safe

Manufactured in Japan in 1989 with a total production of approximately 1,500. The receiver features floral scroll engraving with a gold wolf on the le