Premiere Collector's Firearms Auction

Manufactured in 1924, after WWI Mexico procured an unknown number of Model 1911 pistols made by Colt. These Model 1911 pistols are rare because of Mex

Acquired in 1941, this pistol was one of 500 purchased by the Argentine Naval Commission in order to supplement the Model 1927 45's they were pr...

Manufactured in 1933. The left side of the slide is marked with the two line Hartford address/patent dates (1897 to 1913). The right side of the slid

The left side of the slide is marked with the two line Hartford address/patent dates (1897 to 1911) with the circled Rampant Colt behind the serration

This is an example of an Argentine contract Government Model manufactured between 1914 and 1948 to supply the Argentine Government with .45 caliber se

It has the correct offset receiver markings with "U.S. / REMINGTON / MODEL 03-A3" on the left side and the right side has the serial numbe...

Blade front and adjustable aperture rear sights, with a "6-43" dated Smith-Corona barrel and standard receiver markings. Blue and parkeriz...

Blade front and adjustable rear sights, Winchester marked barrel, Type III barrel band, round blued bolt, button safety, "W" magazine catc...

Blade front and adjustable rear sights, with "R/ 1 - 18" barrel and standard markings on the receiver ring. The safety and bolt catch are ...

A) Produced in October of 1943. Standard sights, with Battle Range drum and locking bar. Springfield barrel, dated "8-43", Springfield bol...

A) Standard commercial markings with "RLB / [ordnance bomb]" on left receiver side. 2 3/4" chamber, choked marked "IMP CYL"...

"NOW...ALL TOGETHER" 7th War Loan poster by C.C. Beall, circa 1945 (see image). Professionally matted in a 31 1/2 inch x 42 1/4 inch frame...

"AND THEY / THOUGHT WE COULDN'T FIGHT" Victory Liberty Loan poster by Clyde Forsythe, circa 1917 (see image). Professionally matted in...

1) "ENLIST TODAY / U.S. MARINES" poster with Cleveland, Ohio recruiting address (see image). Image by Bruce Moore and is 18 inch x 26 inch...

1) U.S. Navy Gregory Sportswear Inc. G-1 flight jacket size 42 with military specification number "MIL-J-7823D(WEP)" (circa 1960s). Squadr...

This is an example of a late WWII M1A1 Carbine manufactured by the Inland Manufacturing Division of General Motors fitted with an original GI paratroo

Post war production, with "NI-C" and "DRC" adjustment drums, "12 54" dated Springfield barrel, "HRA" bolt an...

Blade front and 2-leaf rear sights, with the barrel marked "BUFFALO ARMS/ bomb/ 8-1943". Fitted with a Type I barrel band, flat top bolt, ...

Hooded blade and folding ladder sights, with a "12-41" dated Remington barrel and "R" marked bolt, trigger guard, bolt shroud, a...

Blade front and adjustable rear sights, with "8-44" Inland barrel, Type II barrel band, round bolt, milled trigger guard, button safety an...

Produced as a Model 1922 MI, and later converted to MII which included installing an early NS, M2 bolt. The receiver ring has the standard M1 marking

Produced in Geneseo shortly after they acquired the tooling from Decine, Texas plant. Blade front sight and "NM" rear sight with adjustabl...

Blade front and 2-leaf rear sights, with a "2-43" dated Underwood barrel, Type I barrel band, flat top bolt, milled trigger guard, button ...

Blade and ladder sights, with Springfield barrel dated "1-38", standard receiver markings. Mounted with a smooth stock with a boxed "...

Blade front and 2-leaf rear sights, Winchester marked barrel, Type I barrel band, flat blued bolt, button safety, "W" magazine catch and r...

A) Early commercial procurement with standard commercial markings along with "U.S. [ordnance bomb]" on the left receiver side and on top o...

Approximately 8,000 of these revolvers were produced in 22 caliber from 1949 to 1952. This example has target sights and a custom engraving. Scroll an

Manufactured in 1932. The top of the barrel is marked with the two line address/ 1884, 1905 and 1926 patent dates, the left side is marked "COL...

According to the included factory letter, this revolver was part of a 2-gun order shipped to the Lawlor Sporting Goods Company of Lincoln, Nebraska on

This is an excellent example of an original unaltered Colt New Service revolver as manufactured in 1913. This revolver has the desirable flat top fram

Manufactured in 1909. Replacement brass blade front and windage adjustable rear sights, the barrel has the standard two line address/ 1884, 1900 and 1

A) Made in 1967. Fixed sight and standard markings, with Colt medallions on the checkered grips. BBL: 4 inch round Stock: Gauge: 38 Finish: b

A) Manufactured in 1922. Blade front and notch rear sights, with the two line address/patent marking on top of the barrel, "COLT ARMY / SPECIAL...

A) Manufactured in 1950. Blade front sight adjustable for elevation and rear sight adjustable for windage with standard markings and checkered walnut

A) Manufactured in 1944. Standard two line Hartford address/patent dates marking with "Official Police" markings on left side. Rampant Col...

A) Manufactured in 1921. Fixed sights, standard markings and checkered grips featuring "COLT" in an oval at the top and "C" arou...

Introduced in 1957. Ramp Patridge blade front and adjustable rear sights. Barrel is fitted with a muzzle brake, with the standard markings on the side

Introduced in 1957, this pistol features a ramped Patridge front and adjustable rear target sights, standard markings, 10 round magazine, cocking indi

A) Manufactured in 1980. Standard markings and features with a trigger shoe. Complete with the original box numbered to the gun and papers. BBL: 8-3

Features a ramp Patridge front sight on a matte finished top with an adjustable notch rear sight. Standard markings and equipped with a muzzle brake a

A) Manufactured circa 1955. Standard barrel and frame markings with 5 screws, Patridge front and adjustable rear target sights, wide checkered target

A) Manufactured from 1957 to 1982. standard slide and frame markings, blade front and adjustable rear sights, S&W marked blue magazine and fitte...

A) Manufactured after 1969, with red insert ramped front sight and white outlined micrometer click adjustable rear sight. Built on the square butt, N-

A) Built on the square butt L target frame, this features a red ramp front sight with an adjustable rear sight. Standard barrel and frame markings in

A) Introduced in 1985 and manufactured until 1988 using the square butt N frame. Features a ramp front sight with an adjustable rear sight on a matte

A) Features front ramp sight, adjustable rear sight, a six round fluted cylinder, casehardened checkered hammer, and a smooth casehardened trigger. Ch

A) Features a red insert ramp front sight with micrometer target rear sight. Standard barrel markings, fluted six round cylinder, checkered target ham

A) Standard markings and features. Includes a wooden display case with a Texas Ranger Commemorative knife numbered to gun along the spine. BBL: 4 i

A) Manufactured after 1969, with red insert ramped front sight and white outlined micrometer click adjustable rear sight. Casehardened checkered hamme

A) Manufactured between 1977 and 1978, with ramped Patridge front and adjustable rear sights. The right side of the barrel is marked "45 CAL. M...