June 2010 Regional Firearms Auction

Standard receiver markings with no visible inspector markings, standard features (no stabler cut-off). BBL: 22 inch round Stock: walnut Gauge: 5

Standard conversion with standard markings and features with refinished wood and all blue finish. Some minor pitting. BBL: 22 inch round Stock: wa

Two line patent marking on top of frame, two line address on lock, and "CAST STEEL" on barrel. Buttstock period marked "F.H.R." ...

Fixed sights, standard barrel markings with Merwin & Bray agent marking, barrel band held in place by screw, freshened wood with repaired buttst...

A) Standard markings and features with "1859" patent date on left receiver. BBL: 24 inch round Stock: walnut Gauge: 54 Finish: blu...

A) Manufactured circa 1860's with standard markings and "LAB" on left breech. Serial number on inside lever mechanism. Complete with s...

Manufactured between 1864 and 1865 with standard markings and features. Large crack on left grip area with scattered scratches and dings. Sling swivel

Manufactured between 1862 and 1865 with standard markings and two illegible cartouches on left wrist area. There is an "X" carved on left ...

A) Produced from 1867-88, standard tang marking, "1 / 19" stamped on underside of buttstock. BBL: 35 inch round Stock: walnut Gauge:...

The Grand Army of the Republic (GAR) was a fraternal organization composed of veterans of the Union Army who had served in the American Civil War and

Unmarked 30" blade, single fullers, no visible maker's marks. Brass guard and helmet pommel, with floral designs. No grip. In relic conditi...

27 inch etched double fuller blade, Philadelphia address, brass "USN" hilt with cut through designs, engraving, and rayskin grip. With bra...

29 1/2" curved single fuller blade with engraving and gold fill, cast brass hilt, unmarked brass guard, ribbed bone grip and eagle head pommel....

33 1/4" single fuller blade stamped "1861". Brass guard and pommel, cut-through designs and wire wrapped leather grip. Steel sheath w...

1) U.S. Henderson Ames Model 1840 N.C.O. sword, 28" etched blade, gilt brass hilt and nickel sheath with engraved fittings. 2) U.S. N.S. Meyer ...

1) British Officer's Hawkes & Co (London) Pattern 1822 Sword with 32" etched single fuller blade with gold Proved stamp, wire wrapped r...

Blade is 8 3/4" long, spear pointed and double edged. Brass D guard, pommel cap and collar, bone grip. In good condition, with brass is very go...

32 1/4" single fuller blade with 1863 date and Ames makers mark, "73" stamped guard, wire wrapped grip and metal sheath. Very good, w...

1) Post WWI U.S. Navy Officer's Sword with 28 3/4" single fuller blade with acid etched blade. This sword is marked "MADE/ U.S.A.&quo...

1) U.S. Ames NCO sword, 18 7/8" triple-fuller blade, 1836 date and cast brass hilt. 2) N.C.O. sword, as 1 with "1842/ WS" marked blad...

No makers marks on the 28" double edged blade, brass guard with scroll designs, smooth simulated ivory grip, helmet pommel and steel sheath wit...

1) Knights of the Blue Cross of the World fraternal sword, 28" straight blade, "C.M.Smith" etched with "COMDY/ No5" marking...

1) Non-regulation 1860 officer's sword, 31" etched blade, "J.M. Reid" on one side, gilt brass hilt, folding guard, wire and raysk...

This lot consists of: (1) a U.S. Ames Mountain Troops Ice Axe, (2) LF&C 1917 Trench Knife with pyramid knobs on the guard, (3) "Case XX&qu...

1) W.H. Horstmann & Sons saber, 33" curved single fuller blade with makers mark on the right side, solid metal hand guard and ribbed wood g...

31 1/2" straight, single edged single fuller blade, with engraved designs and strong remaining niter blue and gold washed finishes. Brass hilt,...

1) Unmarked U.S. 1860 saber, 34 3/4" double fuller blade, 2-branch guard, wire wrapped leather grip and iron sheath. 2) French Klingenthal cutl...

1) Dual swords, 19" blades, brass guards, horn grips. With a shared wood veneer sheath. 2) Large powder horn, 14", carved with a rough map...

6 1/8 inch clip point blade, with a 4 inch clip, "N (shield) Y" on the left side of the blade, and "ALEXANDER/ SHEFFIELD" on the...

11 1/2" single edge spear point blade with 1849 date on the left ricasso and "US/WR" on the right. Brass guard marked "WD" ...

Features a bayonet lug on the bottom of the barrel, three spring retained barrel bands and replacement iron ramrod with a tapered end. No visible mark

Percussion conversion by Hewes and Phillips of Newark, New Jersey circa. 1861-62. It has the bolster type percussion conversion, fixed blade front and

Lowered brass front and groove rear sights, with "I. WYNKOOP" engraved on the brass reverse blade. With a wood ramrod, wrist broken and pe...

Reconverted back to flintlock configuration, 1839 dated lock and upper tang, repaired stock. With "US" marked bayonet (about good, even mi...

Early breechblock marking with eagle head, serial number in correct Model 1873 rifle range (1-80000) without "1873" on the lock plate, met...

Reconverted back to flintlock configuration, lock dated 1831 with standard markings, "V/P/eagle head" proofs on barrel, illegible date on ...

Lock dated 1838, tang dated 1838, "P / V / eagle head" proofs on barrel. Bright barrel bands, side plate and buttplate, remaining surfaces...

A) Blade and notch sights, with illegible lock markings, double set trigger, wooden ramrod, brass forearm cap, patch box and brass buttplate. BBL: 4

A) 1842 dated lock plate, bolster type conversion with screw, brass plaque (724-16611) on buttplate. Reoiled stock. With "US / TA", "...

A) Blade sight, with "Mle 1777" on the tang, serial number on left rear flat, "St Etienne" mark on lock, and smooth stock with r...

One leaf absent from rear sight. 1859 dated lock plate. Faint markings. Smooth stock with ""J.W.H" and "G.Gross" added to t...

Blade sight, with reconverted barrel dated "1843", "1814" lock with scarce Virginia markings, trumpet head ramrod, faint stock c...

Lowered blade sight. Tang and lock dated 1841, illegible marking on top of barrel. Smooth stock with "BLH" and "AG" carved into ...

Illegible maker marking, shortened stock and barrel, "IVT" carved on buttstock, bulge in barrel near muzzle. With bayonet (about good, eve...

A) Standard lock markings, barrel dated 1864, varnished stock with boxed cartouche on left flat and metal cleaned. With "US" marked bayone...

A) "KETLAND / & CO" marked lock, brass mountings and pitted barrel. BBL: 33 1/4 inch part octagon Stock: walnut Gauge: 65 Fini...

A) Two brass barrel bands. Lock is marked "WHATELY" in front of the hammer. Brown Bess pattern, possibly pre-War of 1812. Stock is cracked...

A) Right hammer absent, action difficult to break open, replacement stock with crude carving. BBL: 32 inch solid rib Stock: walnut Gauge: 12 F

A) Blade and notch sights, London proofs on barrel, lion with crown on lock plate, brass furniture and smooth straight grip stock. BBL: 39 inch roun

A) Lock has standard U.S./Springfield markings dated 1816, sling swivels absent, custom drum percussion conversion. BBL: 42 inch round Stock: waln