RR Auction: Space & Aviation Auction

Fantastic Apollo–era repair kit pouch containing materials for spacesuit repair, measuring 6 x 6 closed, signed on the front in blue and black felt ti

Apollo A7L spacesuit oxygen umbilical hose. Flexible hose measures almost six-feet long and features two 1.5? diameter rubber hoses feeding into a sin

Red metal wrist disconnect produced by Air-Lock for the Apollo spacesuit, measuring 5? in diameter and 1? thick, engraved with part numbers, “Assy 936

Blue metal Apollo spacesuit connector, approximately 1.5" diameter and 1.75" tall, produced by Air-Lock incorporated for use on the front ...

Developmental white spacesuit Thermal Micrometeorite Garment (TMG) boot covering, measuring approximately 12.5 x 13.5, featuring an open bottom with a

Red metal elbow connector tube produced by Air-Lock for the Apollo spacesuit, measuring 3.25 x 2.25 x 1, engraved with part numbers, “PN-4247R, SN-347

Blue metal oxygen manifold produced by Air-Lock to be used inside the torso of an Apollo spacesuit, measuring 4.75 x 3.25 x .75, engraved inside with

Iconic blue metal Apollo locking spacesuit connector with attached threaded electrical harness, measuring a total of 3.5 tall and 1.5 in diameter. The

Metal bracket, measuring approximately 3 x 1 x 1, used to connect the two webbings from the Portable Life Support System (PLSS) to the lower torso of

Shoulder turn-around ring for an Apollo A7L spacesuit, measuring approximately 7? in diameter, which was attached to the shoulder area and used to gui

Very large Lunar Receiving Lab (LRL) bolted container with a handle on the cover, measuring an overall 14.5? tall and 14? in diameter, engraved with s

Stainless steel Lunar Receiving Lab container, measuring 6? tall and 4? in diameter, engraved with serial number “252-213” on both the top handle and

Heavy-duty aluminum Lunar Receiving Lab (LRL) bolted container with a handle on the cover, measuring an overall 11? long and 4.5? in diameter, serial

Apollo CM solenoid valve, approximately 5.5 x 7.75 with original coiled wiring. Accessory Products Co. information on side reads, “Solenoid Valve, Hel

Saturn solenoid valve, measuring approximately 3.25 x 5, with an affixed George C. Marshall Space Flight Center metal label, “2 way, 2 position soleno

Two items: first, an unused Command Module signal conditioner, 2 x 1.5 x 2.5, manufactured by Space Sciences, Inc. and bearing part number “ME 901-338

Four packages of items related to the Apollo lunar module: an unopened helium valve, 5.5 x 3.25, designed by Grumman Aircraft Engineering, with matchi

Unopened waste fluid collector assembly, 5.5 x 8.25 x 1.75, designed by the Quality Control Department at Grumman Aircraft Engineering, with design co

Lock spring assembly, 4.75 x 1, designed by Grumman Aircraft Engineering, with tags and matching manufacturing part number “LDW320–23751–1.” In fine c

Small black electronic component with nine pins on one side, 1.5 x 1.25 x 1, stenciled with white text, “PIP Preamp Assy, 2004060-011, ACSK 24.” In fi

Remarkable 1964 commissioning plaque, 20 x 28, removed from the Launcher—Umbilical Tower Number 2 at the Kennedy Space Center. Constructed of heavy pl

Unique color limited edition 30 x 24.5 lithograph entitled ‘Moonwalkers,’ numbered 258/1000, signed in felt tip by eleven of the twelve moonwalkers, i

Color limited edition lithograph of a painting entitled ‘Naval Aviation in Space,’ 20.25 x 27.25, numbered 455/1000, signed in pencil by nine astronau

Limited edition color 18 x 24 poster for the US Astronaut Hall of Fame entitled ‘Share the Adventure,’ signed in black felt tip by sixteen astronauts,

Appealing color 15.75 x 12 geologic investigations map of the moon, entitled “Engineer Special Study of the Surface of the Moon, Lunar Rays,” prepared

Schematic for the CSM-101 Suit and Cabin Pressurization systems, one page, 22 x 10.5, signed in the left margin in blue ballpoint, “Richard Gordon, Ap

Original felt tip sketch of a lunar orbit rendezvous diagram by aerospace engineer John C. Houbolt on a white 10 x 8 card, signed in black felt tip, “

Amazing suite of five original limited edition lithographs entitled ‘The Apollo Story,’ 22.5 x 30 and 30 x 22.5, created by Robert T. McCall at the Ta

Signed book: From the Earth to the Moon. First American hardcover edition. NY: Scribner, Armstrong & Company, 1974. Brown cloth hardcover, 6 x 8...

Signed books: a six-volume set of The Astronaut’s Library. Each a limited collector’s edition, numbered 2427/3000. Norwalk, CT: Easton Press. Leather-

Complete four-volume softcover set of The Apollo Spacecraft: A Chronology, dated from 1969 to 1978, each 8 x 10.25, signed on the title page of Volume

Spiral-bound Saturn I Countdown revision A manual, 80 pages, 8.75 x 11, dated January 16, 1964, signed on the front cover in blue ballpoint by Wernher

Signed book: Go, Flight!. First edition. Lincoln, NE: University of Nebraska, 2015. Hardcover with dust jacket, 6.25 x 9.25, 341 pages. Signed on the

Near-complete set of nineteen Sieger stamps representing the Mercury and Apollo missions, each signed by one of the mission's astronauts, includ...

Superb collection of sixteen photos of Apollo astronauts, 8 x 10 and 10 x 8, each signed in felt tip or ink by the subject, including: Buzz Aldrin, Al

Color satin-finish 8 x 10 photo of the mission control insignia designed by artist Robert McCall, signed in black felt tip by eight members of mission

Collection of nine photos of Apollo personnel, mostly 8 x 10 and 10 x 8 (plus one 8 x 11), each signed in felt tip or ink by the subject or an astrona

Desirable collection of 11 items, each signed by a moonwalker, including: Charles Conrad (check); Alan Shepard (signature); Edgar Mitchell (commemorat

Two oversized photos: a color glossy 16 x 20 cardstock photo of Irwin saluting the American flag on the lunar surface, signed and inscribed in silver

North American Aviation three-piece contractor’s model of the Apollo spacecraft, measuring 20? tall and set upon a 7? diameter base, manufactured by t

Desirable sterling ‘Silver Snoopy’ pin awarded to NASA employee Howard P. Lloyd, measuring approximately .5? tall and marked on the reverse with “Unit

Detailed 1/10,000,000 scale Apollo Landing Sites map, 15 x 17.5, listing “Ocean of Storms” and “Sea of Tranquility” as the landing spots for Apollo mi

Three large pieces of Kapton foil removed from an Apollo-era lunar module. The first, 9 x 7.5, consists of two silver-colored layered sheets with area

Collection of five original charts, various sizes, all pertaining to the lunar or Martian landscape. Charts are titled: “The Aristarchus-Herodotus Reg

Uncommon book: 10:56:20 PM, Edt 7/20/69. First edition. NY: Columbia Broadcasting System, 1970. Hardcover with dust jacket, 10.25 x 11, 169 pages. In

Complete set of The Apollo Spacecraft: A Chronology, Volumes 1–4. Washington, DC: NASA, 1969–78. Softcovers, 7.75 x 10.25. In overall fine condition,

Apollo: Expeditions to the Moon. First edition. Washington DC: NASA, 1975. Hardcover, 9 x 12, 313 pages. In fine condition, with slight dings to corne

NASA flight controller during the Apollo era (born 1936). Collection of three of Liebergot’s NASA Manned Spacecraft Center access badges, issued to “S

Extraordinary crew log book extensively used throughout the Apollo 7 flight, 32 pages (16 double-sided sheets) plus cardstock covers, 5 x 8, signed an

Unusual training-used double-sided map of Earth with a translucent orbital overlay, 19.75 x 9, signed on the map in black felt tip, “Walt Cunningham,