RR Auction: Space & Aviation Auction

Satin-finish 20 x 16 photo of the damaged Apollo 13 command module floating in space, signed in gold ink, “Houston, we’ve had a problem! James Lovell,

Fantastic color glossy 15 x 10 photo of the disabled Apollo 13 spacecraft, signed in silver ink, “Jack Lousma, CAPCOM—Apollo 13,” with the addition of

Satin-finish 20 x 16 photo of a sequence of craters on the lunar surface, signed in silver ink, “‘There’s the Terminator at Fra Mauro...We’d be landin

Color glossy 15 x 10 photo of the Mission Operations Control Room, signed in the lower border in blue felt tip, “Gene Kranz said, ‘OK people, let’s wo

Color glossy 15 x 10 photo of Mission Control after the Apollo 13 successfully returned to Earth, signed in the lower border in blue felt tip, “The Ap

Color satin-finish 14 x 11 photo of a rocket launch, signed in black felt tip, “James Lovell, Apollo 13.” In fine condition. The Leslie Cantwell Colle

Color 11 x 8.5 laserprint photo of the Apollo 13 splashdown, signed in silver ink, “James Lovell, Apollo 13.” In fine condition, with a slightly grain

Color satin-finish 20 x 16 photo of the Apollo 14 lunar module Antares on the moon’s surface, signed in silver ink, “‘This is what carries fire toward

Color glossy 11 x 8.5 laserprint photo of the Apollo 14 launch, signed in silver ink, “Fire in the hole, Edgar Mitchell, Apollo 14.” In fine condition

Color satin-finish 14 x 11 photo of the Apollo 16 splashdown, signed in silver ink, “Safely home again, Charlie Duke, Apollo 16.” In fine condition. T

Color glossy 20 x 16 photo of Young driving the lunar rover solo on the moon’s surface, signed in silver ink, “‘Well Houston, when Charlie’s in here i

Color glossy 20 x 16 photo of Young sealing up an Apollo lunar surface experiments package on the moon’s surface, signed in black felt tip, “On the Mo

Color satin-finish 20 x 16 photo of Alexei Leonov displaying his sketch of Apollo commander Tom Stafford during the ASTP flight, signed in black felt

Color satin-finish 20 x 16 photo of Expedition 4 Commander Yuri Onufrienko floating horizontally inside the spacecraft, signed in black felt tip by On

An original mid-1960s lunar rover prototype, or Local Scientific Survey Module, developed for NASA by Brown Engineering and known as the ‘Brown LSSM.’

Large Saturn V analog flight control computer manufactured by Electronic Communications Inc., measuring approximately 24 x 18 x 18, labeled on one end

Apollo Block I translation hand controller with a housing measuring approximately 5.5 x 3 x 3.5 and attached umbilical measuring 60? long. The Honeywe

Apollo Command Module Block I Display Attitude Gyro Accelerometer Electronic Control Assembly manufactured by Honeywell, measuring 11.5 x 5.5 x 22, wi

Early Apollo Command Module (Block I) armrest attachment, measuring approximately 13 x 4, with locking and unlocking hand control attachment and armre

Apollo CSM Fuel Cell Powerplant Assembly manufactured by Pratt & Whitney under subcontract for North American Aviation, measuring approximately ...

Apollo CM Block I Prototype Electronic Display Assembly manufactured by Honeywell, 21.5 x 6 x 5.5, with an affixed parts label reading, “Electronic Di

Apollo Command Module (Block II) Control and Stabilization System Electronic Display Assembly (EDA) manufactured by Honeywell, 22 x 6 x 6, with an aff

Apollo CM Block II Gyro Display Coupler manufactured by Honeywell, 20 x 6 x 6.5, with an affixed parts label reading, “Coupler Gyro Display, NAA/S &...

Apollo Guidance Computer (AGC) module, 9.75 x 1 x 1.75, labeled on the yellow exterior, “Rope Driver Module B16–17, NASA No 2003140-031, Mfd by Raythe

Rare Apollo Guidance Computer (AGC) module, 9.75 x 1 x 1.75, labeled on the red exterior, “Erasable Driver Module B9–10, NASA No. 2003114-021. Mfd by

Apollo Command Module Block II Gauge. Gauge measures 1.75 x 1.5 x 3.75 and is calibrated from 0–360 degrees. A Weston Instruments Inc. Label is affixe

Apollo CM Block I Caution and Warning Indicator Panel, measuring approximately 5.25 x 3.5 x 25, with a label on the top reading, “Annunciator, Event,

Apollo Command Module Block II Earth Landing Sequence Controller, measuring 7 x 4.5 x 3, bearing a large parts tag affixed to the top, reading: “Item

Apollo Command Module (Block II) Pulse Code Modulation (PCM) Telemetry Assembly, measuring approximately 13 x 7 x 14 and weighing 42.1 pounds, manufac

Apollo Command Module Up-Data Link (UDL) equipment manufactured by Motorola, measuring approximately 9 x 17 x 5.5, labeled “C28-1A103.” The unit has f

Command module PP02 meter manufactured by Weston Instruments, Inc., measuring 1.25 x 4.5 x 5, with an affixed label on top edge, reading, “Meter, Indi

Black electronic component with 23 pins on one side, 3.75 x 1.75 x 1.5, stenciled in white text, “Gimbal Servo, Amplifier, 2007114-021, ACSK 89.” In f

Apollo CM Block II Environmental Control System (ECS) Glycol Electronic Control, measuring 6.5 x 5.75 x 1.5, with power connector and Glenair, Inc. co

Apollo-era Command Module breaker panel. This production representative for flight application panel measures 16 x 7.5, retains its internal component

Early Apollo Command Module Reaction Jet Controller manufactured by Honeywell, 23.5 x 6 x 6, with an affixed parts label reading, “Reaction Jet Engine

Collection of nine master drawings of the Block II Apollo Command Module on eight large transparency sheets and one large paper sheet, the majority ha

Apollo CM Guidance and Navigation Computer Buffer Unit, measuring 6 x 4 x 6, with three connection ports labeled “J200,” “J202,” and “J203,” an orange

Empty aluminum Apollo CM Side Hatch Counter Balance System Nitrogen Gas Cartridge, measuring approximately 9? long and 1? in diameter, labeled on the

LM Control Panel 2 mockup face assembly, 15 x 24.25, containing areas for caution and warning system lights, temperature, propellant, firing status in

Apollo Lunar Module Descent Engine (LMDE) Propellant and Oxidizer Shutoff Valve Assembly, measuring approximately 6 x 19 x 6.5, with Whitaker Corporat

Apollo Inertial Measurement Unit Inertial Rate Integrating Gyro mockup (inoperative shell only), measuring approximately 5.25? tall by 2.5? in diamete

LM Descent Engine shut-off valve assembly for the fuel side, measuring approximately 6 x 6.5 x 7.75. Engraved on the top, “MIR 43625,” with parts numb

Display model of the Lunar Excursion Module Descent Engine (LEMDE) three-motor throttle actuator, circa 1966, measuring 13.5 x 7 x 5, with an affixed

Marquardt R-4D RCS rocket engine combustion chamber, 3.75 x 6, labeled on the side in white stenciling, “S28TC3214.” Side of upper rim engraved, “VN,

Kennedy Space Center Saturn S-IVB Upper Stage Measuring and RF Indicator Panel, measuring approximately 19 x 17.5 x 18, labeled at the bottom of the f

Tank manufactured by Bell Aerosystems Company, measuring approximately 12 x 28 x 14, with a parts label reading: “Item Name: Thank MMH Positive Expuls

Saturn V First Stage LOX Tanking Computer Interface that connected to the Propellant Tanking Computer System, 19 x 14 x 22, labeled at the bottom of t

Apollo post-landing vent valve component, measuring approximately 8.5 x 12 x 7, consisting of a valve gate, actuator rotary, and mounting bracket. The

Saturn V launch vehicle Exploding Bridge Wire (EBW) Firing Unit mounted on a 20 x 8 plywood board, with a George C. Marshall Space Flight Center metal

Apollo A7L Spacesuit Communications Cable Adapter (CCA) breakout box, measuring approximately 17 x 4 x 3 with two 18? long cables extending from one s