RR Auction: Space & Aviation Auction

Satin-finish 20 x 16 photo of the damaged Apollo 13 command module floating in space, signed in gold ink, “Houston, we’ve had a problem! James Lovell,

Fantastic color glossy 15 x 10 photo of the disabled Apollo 13 spacecraft, signed in silver ink, “Jack Lousma, CAPCOM—Apollo 13,” with the addition of

Satin-finish 20 x 16 photo of a sequence of craters on the lunar surface, signed in silver ink, “‘There’s the Terminator at Fra Mauro...We’d be landin

Color glossy 15 x 10 photo of the Mission Operations Control Room, signed in the lower border in blue felt tip, “Gene Kranz said, ‘OK people, let’s wo

Color glossy 15 x 10 photo of Mission Control after the Apollo 13 successfully returned to Earth, signed in the lower border in blue felt tip, “The Ap

Color satin-finish 14 x 11 photo of a rocket launch, signed in black felt tip, “James Lovell, Apollo 13.” In fine condition. The Leslie Cantwell Colle

Color 11 x 8.5 laserprint photo of the Apollo 13 splashdown, signed in silver ink, “James Lovell, Apollo 13.” In fine condition, with a slightly grain

Color satin-finish 20 x 16 photo of the Apollo 14 lunar module Antares on the moon’s surface, signed in silver ink, “‘This is what carries fire toward

Color glossy 11 x 8.5 laserprint photo of the Apollo 14 launch, signed in silver ink, “Fire in the hole, Edgar Mitchell, Apollo 14.” In fine condition

Color satin-finish 14 x 11 photo of the Apollo 16 splashdown, signed in silver ink, “Safely home again, Charlie Duke, Apollo 16.” In fine condition. T

Color glossy 20 x 16 photo of Young driving the lunar rover solo on the moon’s surface, signed in silver ink, “‘Well Houston, when Charlie’s in here i

Color glossy 20 x 16 photo of Young sealing up an Apollo lunar surface experiments package on the moon’s surface, signed in black felt tip, “On the Mo

Color satin-finish 20 x 16 photo of Alexei Leonov displaying his sketch of Apollo commander Tom Stafford during the ASTP flight, signed in black felt

Color satin-finish 20 x 16 photo of Expedition 4 Commander Yuri Onufrienko floating horizontally inside the spacecraft, signed in black felt tip by On

An original mid-1960s lunar rover prototype, or Local Scientific Survey Module, developed for NASA by Brown Engineering and known as the ‘Brown LSSM.’

Large Saturn V analog flight control computer manufactured by Electronic Communications Inc., measuring approximately 24 x 18 x 18, labeled on one end

Apollo Block I translation hand controller with a housing measuring approximately 5.5 x 3 x 3.5 and attached umbilical measuring 60? long. The Honeywe

Apollo Command Module Block I Display Attitude Gyro Accelerometer Electronic Control Assembly manufactured by Honeywell, measuring 11.5 x 5.5 x 22, wi

Early Apollo Command Module (Block I) armrest attachment, measuring approximately 13 x 4, with locking and unlocking hand control attachment and armre

Apollo CSM Fuel Cell Powerplant Assembly manufactured by Pratt & Whitney under subcontract for North American Aviation, measuring approximately ...

Apollo CM Block I Prototype Electronic Display Assembly manufactured by Honeywell, 21.5 x 6 x 5.5, with an affixed parts label reading, “Electronic Di

Apollo Command Module (Block II) Control and Stabilization System Electronic Display Assembly (EDA) manufactured by Honeywell, 22 x 6 x 6, with an aff

Apollo CM Block II Gyro Display Coupler manufactured by Honeywell, 20 x 6 x 6.5, with an affixed parts label reading, “Coupler Gyro Display, NAA/S &...

Apollo Guidance Computer (AGC) module, 9.75 x 1 x 1.75, labeled on the yellow exterior, “Rope Driver Module B16–17, NASA No 2003140-031, Mfd by Raythe

Rare Apollo Guidance Computer (AGC) module, 9.75 x 1 x 1.75, labeled on the red exterior, “Erasable Driver Module B9–10, NASA No. 2003114-021. Mfd by

Apollo Command Module Block II Gauge. Gauge measures 1.75 x 1.5 x 3.75 and is calibrated from 0–360 degrees. A Weston Instruments Inc. Label is affixe

Apollo CM Block I Caution and Warning Indicator Panel, measuring approximately 5.25 x 3.5 x 25, with a label on the top reading, “Annunciator, Event,

Apollo Command Module Block II Earth Landing Sequence Controller, measuring 7 x 4.5 x 3, bearing a large parts tag affixed to the top, reading: “Item

Apollo Command Module (Block II) Pulse Code Modulation (PCM) Telemetry Assembly, measuring approximately 13 x 7 x 14 and weighing 42.1 pounds, manufac

Apollo Command Module Up-Data Link (UDL) equipment manufactured by Motorola, measuring approximately 9 x 17 x 5.5, labeled “C28-1A103.” The unit has f

Command module PP02 meter manufactured by Weston Instruments, Inc., measuring 1.25 x 4.5 x 5, with an affixed label on top edge, reading, “Meter, Indi

Black electronic component with 23 pins on one side, 3.75 x 1.75 x 1.5, stenciled in white text, “Gimbal Servo, Amplifier, 2007114-021, ACSK 89.” In f

Apollo CM Block II Environmental Control System (ECS) Glycol Electronic Control, measuring 6.5 x 5.75 x 1.5, with power connector and Glenair, Inc. co

Apollo-era Command Module breaker panel. This production representative for flight application panel measures 16 x 7.5, retains its internal component

Early Apollo Command Module Reaction Jet Controller manufactured by Honeywell, 23.5 x 6 x 6, with an affixed parts label reading, “Reaction Jet Engine

Collection of nine master drawings of the Block II Apollo Command Module on eight large transparency sheets and one large paper sheet, the majority ha

Apollo CM Guidance and Navigation Computer Buffer Unit, measuring 6 x 4 x 6, with three connection ports labeled “J200,” “J202,” and “J203,” an orange

Empty aluminum Apollo CM Side Hatch Counter Balance System Nitrogen Gas Cartridge, measuring approximately 9? long and 1? in diameter, labeled on the

LM Control Panel 2 mockup face assembly, 15 x 24.25, containing areas for caution and warning system lights, temperature, propellant, firing status in

Apollo Lunar Module Descent Engine (LMDE) Propellant and Oxidizer Shutoff Valve Assembly, measuring approximately 6 x 19 x 6.5, with Whitaker Corporat

Apollo Inertial Measurement Unit Inertial Rate Integrating Gyro mockup (inoperative shell only), measuring approximately 5.25? tall by 2.5? in diamete

LM Descent Engine shut-off valve assembly for the fuel side, measuring approximately 6 x 6.5 x 7.75. Engraved on the top, “MIR 43625,” with parts numb

Display model of the Lunar Excursion Module Descent Engine (LEMDE) three-motor throttle actuator, circa 1966, measuring 13.5 x 7 x 5, with an affixed

Marquardt R-4D RCS rocket engine combustion chamber, 3.75 x 6, labeled on the side in white stenciling, “S28TC3214.” Side of upper rim engraved, “VN,

Kennedy Space Center Saturn S-IVB Upper Stage Measuring and RF Indicator Panel, measuring approximately 19 x 17.5 x 18, labeled at the bottom of the f

Tank manufactured by Bell Aerosystems Company, measuring approximately 12 x 28 x 14, with a parts label reading: “Item Name: Thank MMH Positive Expuls

Saturn V First Stage LOX Tanking Computer Interface that connected to the Propellant Tanking Computer System, 19 x 14 x 22, labeled at the bottom of t

Apollo post-landing vent valve component, measuring approximately 8.5 x 12 x 7, consisting of a valve gate, actuator rotary, and mounting bracket. The

Saturn V launch vehicle Exploding Bridge Wire (EBW) Firing Unit mounted on a 20 x 8 plywood board, with a George C. Marshall Space Flight Center metal

Apollo A7L Spacesuit Communications Cable Adapter (CCA) breakout box, measuring approximately 17 x 4 x 3 with two 18? long cables extending from one s

Fantastic Apollo–era repair kit pouch containing materials for spacesuit repair, measuring 6 x 6 closed, signed on the front in blue and black felt ti

Apollo A7L spacesuit oxygen umbilical hose. Flexible hose measures almost six-feet long and features two 1.5? diameter rubber hoses feeding into a sin

Red metal wrist disconnect produced by Air-Lock for the Apollo spacesuit, measuring 5? in diameter and 1? thick, engraved with part numbers, “Assy 936

Blue metal Apollo spacesuit connector, approximately 1.5" diameter and 1.75" tall, produced by Air-Lock incorporated for use on the front ...

Developmental white spacesuit Thermal Micrometeorite Garment (TMG) boot covering, measuring approximately 12.5 x 13.5, featuring an open bottom with a

Red metal elbow connector tube produced by Air-Lock for the Apollo spacesuit, measuring 3.25 x 2.25 x 1, engraved with part numbers, “PN-4247R, SN-347

Blue metal oxygen manifold produced by Air-Lock to be used inside the torso of an Apollo spacesuit, measuring 4.75 x 3.25 x .75, engraved inside with

Iconic blue metal Apollo locking spacesuit connector with attached threaded electrical harness, measuring a total of 3.5 tall and 1.5 in diameter. The

Metal bracket, measuring approximately 3 x 1 x 1, used to connect the two webbings from the Portable Life Support System (PLSS) to the lower torso of

Shoulder turn-around ring for an Apollo A7L spacesuit, measuring approximately 7? in diameter, which was attached to the shoulder area and used to gui

Very large Lunar Receiving Lab (LRL) bolted container with a handle on the cover, measuring an overall 14.5? tall and 14? in diameter, engraved with s

Stainless steel Lunar Receiving Lab container, measuring 6? tall and 4? in diameter, engraved with serial number “252-213” on both the top handle and

Heavy-duty aluminum Lunar Receiving Lab (LRL) bolted container with a handle on the cover, measuring an overall 11? long and 4.5? in diameter, serial

Apollo CM solenoid valve, approximately 5.5 x 7.75 with original coiled wiring. Accessory Products Co. information on side reads, “Solenoid Valve, Hel

Saturn solenoid valve, measuring approximately 3.25 x 5, with an affixed George C. Marshall Space Flight Center metal label, “2 way, 2 position soleno

Two items: first, an unused Command Module signal conditioner, 2 x 1.5 x 2.5, manufactured by Space Sciences, Inc. and bearing part number “ME 901-338

Four packages of items related to the Apollo lunar module: an unopened helium valve, 5.5 x 3.25, designed by Grumman Aircraft Engineering, with matchi

Unopened waste fluid collector assembly, 5.5 x 8.25 x 1.75, designed by the Quality Control Department at Grumman Aircraft Engineering, with design co

Lock spring assembly, 4.75 x 1, designed by Grumman Aircraft Engineering, with tags and matching manufacturing part number “LDW320–23751–1.” In fine c

Small black electronic component with nine pins on one side, 1.5 x 1.25 x 1, stenciled with white text, “PIP Preamp Assy, 2004060-011, ACSK 24.” In fi

Remarkable 1964 commissioning plaque, 20 x 28, removed from the Launcher—Umbilical Tower Number 2 at the Kennedy Space Center. Constructed of heavy pl

Unique color limited edition 30 x 24.5 lithograph entitled ‘Moonwalkers,’ numbered 258/1000, signed in felt tip by eleven of the twelve moonwalkers, i

Color limited edition lithograph of a painting entitled ‘Naval Aviation in Space,’ 20.25 x 27.25, numbered 455/1000, signed in pencil by nine astronau

Limited edition color 18 x 24 poster for the US Astronaut Hall of Fame entitled ‘Share the Adventure,’ signed in black felt tip by sixteen astronauts,

Appealing color 15.75 x 12 geologic investigations map of the moon, entitled “Engineer Special Study of the Surface of the Moon, Lunar Rays,” prepared

Schematic for the CSM-101 Suit and Cabin Pressurization systems, one page, 22 x 10.5, signed in the left margin in blue ballpoint, “Richard Gordon, Ap

Original felt tip sketch of a lunar orbit rendezvous diagram by aerospace engineer John C. Houbolt on a white 10 x 8 card, signed in black felt tip, “

Amazing suite of five original limited edition lithographs entitled ‘The Apollo Story,’ 22.5 x 30 and 30 x 22.5, created by Robert T. McCall at the Ta

Signed book: From the Earth to the Moon. First American hardcover edition. NY: Scribner, Armstrong & Company, 1974. Brown cloth hardcover, 6 x 8...

Signed books: a six-volume set of The Astronaut’s Library. Each a limited collector’s edition, numbered 2427/3000. Norwalk, CT: Easton Press. Leather-

Complete four-volume softcover set of The Apollo Spacecraft: A Chronology, dated from 1969 to 1978, each 8 x 10.25, signed on the title page of Volume

Spiral-bound Saturn I Countdown revision A manual, 80 pages, 8.75 x 11, dated January 16, 1964, signed on the front cover in blue ballpoint by Wernher

Signed book: Go, Flight!. First edition. Lincoln, NE: University of Nebraska, 2015. Hardcover with dust jacket, 6.25 x 9.25, 341 pages. Signed on the

Near-complete set of nineteen Sieger stamps representing the Mercury and Apollo missions, each signed by one of the mission's astronauts, includ...

Superb collection of sixteen photos of Apollo astronauts, 8 x 10 and 10 x 8, each signed in felt tip or ink by the subject, including: Buzz Aldrin, Al

Color satin-finish 8 x 10 photo of the mission control insignia designed by artist Robert McCall, signed in black felt tip by eight members of mission

Collection of nine photos of Apollo personnel, mostly 8 x 10 and 10 x 8 (plus one 8 x 11), each signed in felt tip or ink by the subject or an astrona

Desirable collection of 11 items, each signed by a moonwalker, including: Charles Conrad (check); Alan Shepard (signature); Edgar Mitchell (commemorat

Two oversized photos: a color glossy 16 x 20 cardstock photo of Irwin saluting the American flag on the lunar surface, signed and inscribed in silver

North American Aviation three-piece contractor’s model of the Apollo spacecraft, measuring 20? tall and set upon a 7? diameter base, manufactured by t

Desirable sterling ‘Silver Snoopy’ pin awarded to NASA employee Howard P. Lloyd, measuring approximately .5? tall and marked on the reverse with “Unit

Detailed 1/10,000,000 scale Apollo Landing Sites map, 15 x 17.5, listing “Ocean of Storms” and “Sea of Tranquility” as the landing spots for Apollo mi

Three large pieces of Kapton foil removed from an Apollo-era lunar module. The first, 9 x 7.5, consists of two silver-colored layered sheets with area

Collection of five original charts, various sizes, all pertaining to the lunar or Martian landscape. Charts are titled: “The Aristarchus-Herodotus Reg

Uncommon book: 10:56:20 PM, Edt 7/20/69. First edition. NY: Columbia Broadcasting System, 1970. Hardcover with dust jacket, 10.25 x 11, 169 pages. In

Complete set of The Apollo Spacecraft: A Chronology, Volumes 1–4. Washington, DC: NASA, 1969–78. Softcovers, 7.75 x 10.25. In overall fine condition,

Apollo: Expeditions to the Moon. First edition. Washington DC: NASA, 1975. Hardcover, 9 x 12, 313 pages. In fine condition, with slight dings to corne

NASA flight controller during the Apollo era (born 1936). Collection of three of Liebergot’s NASA Manned Spacecraft Center access badges, issued to “S

Extraordinary crew log book extensively used throughout the Apollo 7 flight, 32 pages (16 double-sided sheets) plus cardstock covers, 5 x 8, signed an

Unusual training-used double-sided map of Earth with a translucent orbital overlay, 19.75 x 9, signed on the map in black felt tip, “Walt Cunningham,