RR Auction: Space & Aviation Auction

Vintage official NASA 7.75 x 10 glossy photo of Lovell in a suit and tie, signed and inscribed in black ballpoint, “To Grace—Best Regards, James Lovel

Flown Gemini 12 Fliteline silver medallion, 1? diameter, with the front featuring a raised design of the mission insignia and the reverse engraved wit

Gemini 12 procedures checklist page certified by the consignor as flown, 5 x 8, headed “Exposure Times for Astronomical Phenomena,” with indicated fil

Two Gemini 12 manuals personally-owned and -used by deputy launch director Walter Kapryan. First is his manual entitled “Gemini Operations Handbook, G

Astronaut and would-be commander of Gemini 9 (1927–1966) who perished in a plane crash before the historic voyage. Handsome vintage official NASA 7.75

Apollo Command Module rotation hand controller with a housing measuring approximately 7.25 x 5.25 x 3 and attached umbilical measuring 160? long; the

Lower Equipment Bay (LEB) Control Panel 105 assembly that comprised part of the Guidance and Navigation interface, 23.5 x 13, bearing a NASA parts lab

Prototype TR204 Saturn V Third Stage Auxiliary Propulsion System Rocket engine, measuring approximately 16? long with a 6.75? diameter nozzle, with a

Flown Apollo Command Module Block I Earth Landing Sequence Controller flown on the Apollo 4 mission, measuring 7 x 4.5 x 3, bearing a large parts tag

Apollo Command Module Block I Display Attitude Gyro Accelerometer Electronic Control Assembly manufactured by Honeywell, measuring 11.5 x 5.5 x 22, wi

Apollo CM Block I Prototype Electronic Display Assembly manufactured by Honeywell, 21.5 x 6 x 5.5, with an affixed parts label reading, “Electronic Di

Apollo Service Module (CSM) Jettison Sequence Controller (Block I configuration), 13.5 x 5 x 5.5, manufactured by Autonetics and bearing an identifica

Apollo Command Module (Block I) AC Over/Under-Voltage Assembly, measuring 17.5 x 4.5 x 7, manufactured by Autonetics. The part label identifies the pi

Apollo Command Module (Block II) Master Events Sequencer Controller (MESC), measuring 12 x 13 x 9, labeled on one side, “Controller—Sequence Master Ev

Nearly complete Apollo Block II circuit beaker panel. This production representative for flight application panel measures 10.5 x 12.75, is numbered “

Apollo Command Module (Block II) Pulse Code Modulation (PCM) Telemetry Assembly, measuring 13 x 7 x 14 and weighing 42.1 pounds, manufactured by Radia

Apollo Command Module (Block II) Central Timing Equipment Module, measuring 8 x 5 x 6, manufactured by General Time Corporation. Stenciled in red belo

Apollo Command Module (Block II) Control and Stabilization System Electronic Display Assembly (EDA) manufactured by Honeywell, 22 x 6 x 6, with an aff

Apollo CM Block II Gyro Display Coupler manufactured by Honeywell, 20 x 6 x 6.5, with an affixed parts label reading, “Coupler Gyro Display, NAA/S &...

Apollo Command Module (Block II) Environmental Control Unit (ECU) Evaporator, measuring 13 x 8 x 6, stenciled on one side with part numbers, “812582-1