RR Auction: Space & Aviation Auction

Flown page from the Gemini V Experimental Procedure Book, 5 x 8, with a tab on the right side reading, “FILM, f,” potentially written in the hand of m

Color satin-finish 10 x 8 photo of the Gemini 5 crew fully dressed in their white spacesuits, signed in black felt tip, “Gordon Cooper, GT5 CDR,” and

Playful color satin-finish 8 x 10 photo of Conrad and Cooper onboard the prime recovery vessel after their Gemini 5 flight, signed in blue felt tip, “

Official color glossy 8 x 10 ‘red-numbered’ NASA photo of the Gemini 7 spacecraft as viewed from Gemini 6 during rendezvous, signed in the lower borde

Color satin-finish 10 x 8 photo of the Gemini 6 crew posing in their white spacesuits, signed in black felt tip by Tom Stafford, and in black ink by W

Fantastic flown bright red-orange survival switchblade pocket knife carried on the Gemini 6A mission, measuring 4.25? long when closed and 7.25? long

Scarce flown Gemini 6 Fliteline gold-plated medallion, 1? diameter, with the front featuring a raised design of the mission insignia and the reverse e

Impressive official glossy 10 x 8 NASA photo of Gemini 8’s Dave Scott and Neil Armstrong posing in their flight suits, signed in black ink by Scott an

Dave Scott’s Gemini Spacecraft 8 manual, 109 pages, 8.5 x 11, February 22, 1966, signed on the front cover in black felt tip. The manual is a flight r

Official color 10 x 8 NASA lithograph of the Gemini 9 crew posing in their white spacesuits, signed in black felt tip by Tom Stafford and Gene Cernan.

Color glossy 9.25 x 7.25 photo of command pilot Tom Stafford in the Gemini spacecraft, matted to an overall size of 16 x 20, signed on the mat in blac

Uncommon color satin-finish 8 x 10 photo of John Young and Michael Collins posing in their white spacesuits, signed by both in black felt tip. In very

Flown surgical scissors carried aboard the Gemini 10 mission, measuring 8.25? long, hand-engraved on the side with the NASA part number, “P/N 20542,”

Flown metal fragment from the Gemini-Titan 10 first stage booster, approximately 1.5 x .5, affixed to a 7.75 x 10 Air Force Space Museum sheet present

Kranz’s laminated badge for the NASA Manned Spacecraft Center, Mission Control Center-Houston, 2.25 x 4, stamped with his name, “Kranz, Eugene F.,” no

Color satin-finish 8 x 10 photo of the Gemini 12 crew prior to liftoff, signed in blue felt tip, “‘Out to launch,’ Charles Conrad, Jr., Gemini XI CDR”

Color satin-finish 10 x 8 photo of the Gemini 11 crew members posing with a small model of their capsule, signed in blue felt tip, “Charles Conrad, Jr

Vintage official NASA 8 x 10 glossy photo of Conrad in a suit and tie, signed and inscribed in blue ink, “To Grace, the girl with the ‘green stuff’—Th

Flown penlight carried on the Gemini 11 mission manufactured by Whirlpool, measuring approximately 5.5? long, with the body wrapped in Velcro and bear

Color satin-finish 8 x 10 photo of the Gemini 12 crew standing in a mockup of their SC12 capsule, signed in silver ink by both. In fine condition. The

Vintage official NASA 7.75 x 10 glossy photo of Lovell in a suit and tie, signed and inscribed in black ballpoint, “To Grace—Best Regards, James Lovel

Flown Gemini 12 Fliteline silver medallion, 1? diameter, with the front featuring a raised design of the mission insignia and the reverse engraved wit

Gemini 12 procedures checklist page certified by the consignor as flown, 5 x 8, headed “Exposure Times for Astronomical Phenomena,” with indicated fil

Two Gemini 12 manuals personally-owned and -used by deputy launch director Walter Kapryan. First is his manual entitled “Gemini Operations Handbook, G

Astronaut and would-be commander of Gemini 9 (1927–1966) who perished in a plane crash before the historic voyage. Handsome vintage official NASA 7.75

Apollo Command Module rotation hand controller with a housing measuring approximately 7.25 x 5.25 x 3 and attached umbilical measuring 160? long; the

Lower Equipment Bay (LEB) Control Panel 105 assembly that comprised part of the Guidance and Navigation interface, 23.5 x 13, bearing a NASA parts lab

Prototype TR204 Saturn V Third Stage Auxiliary Propulsion System Rocket engine, measuring approximately 16? long with a 6.75? diameter nozzle, with a

Flown Apollo Command Module Block I Earth Landing Sequence Controller flown on the Apollo 4 mission, measuring 7 x 4.5 x 3, bearing a large parts tag

Apollo Command Module Block I Display Attitude Gyro Accelerometer Electronic Control Assembly manufactured by Honeywell, measuring 11.5 x 5.5 x 22, wi

Apollo CM Block I Prototype Electronic Display Assembly manufactured by Honeywell, 21.5 x 6 x 5.5, with an affixed parts label reading, “Electronic Di

Apollo Service Module (CSM) Jettison Sequence Controller (Block I configuration), 13.5 x 5 x 5.5, manufactured by Autonetics and bearing an identifica

Apollo Command Module (Block I) AC Over/Under-Voltage Assembly, measuring 17.5 x 4.5 x 7, manufactured by Autonetics. The part label identifies the pi

Apollo Command Module (Block II) Master Events Sequencer Controller (MESC), measuring 12 x 13 x 9, labeled on one side, “Controller—Sequence Master Ev

Nearly complete Apollo Block II circuit beaker panel. This production representative for flight application panel measures 10.5 x 12.75, is numbered “

Apollo Command Module (Block II) Pulse Code Modulation (PCM) Telemetry Assembly, measuring 13 x 7 x 14 and weighing 42.1 pounds, manufactured by Radia

Apollo Command Module (Block II) Central Timing Equipment Module, measuring 8 x 5 x 6, manufactured by General Time Corporation. Stenciled in red belo

Apollo Command Module (Block II) Control and Stabilization System Electronic Display Assembly (EDA) manufactured by Honeywell, 22 x 6 x 6, with an aff

Apollo CM Block II Gyro Display Coupler manufactured by Honeywell, 20 x 6 x 6.5, with an affixed parts label reading, “Coupler Gyro Display, NAA/S &...

Apollo Command Module (Block II) Environmental Control Unit (ECU) Evaporator, measuring 13 x 8 x 6, stenciled on one side with part numbers, “812582-1

Apollo Command Module Block II Acceleration Gauge. Gauge measures 2.25? wide and 5? long, with a dial calibrated from -1 to 15 gs. A Bendix Instrument

Extremely rare Ground Support Equipment RCA-110A Launch Computer Core Memory Module, 8 x 10.25 x 5, bearing an affixed Radio Corporation of America pa

Apollo Command Module Unified S-Band Omni Directional Antenna element manufactured by Amecom Div. Litton Systems, Inc., measuring approximately 4? tal

Apollo Command Module Cabin Temperature Control Valve unit manufactured by Airesearch, measuring approximately 6 x 4 x 3, bearing an affixed parts lab

Apollo Environmental Control Unit Shutoff Valve, measuring approximately 5 x 6 x 3, bearing parts labels affixed to three separate sections, reading:

Apollo Inertial Measurement Unit Inertial Rate Integrating Gyro mockup (inoperative shell only), measuring approximately 5.25? tall by 2.5? in diamete

EVA/IVA Switchbox Assembly, 4 x 6 x 3, bearing an affixed parts tag reading: “Switch Box Assy—EVA/IVA, Stk No. 06362, Part N36-85502041, Contr. NAS9-1

Unflown Apollo data acquisition camera remote control cable. The cable measures 47.5? long and ends with a connector labeled “6924, UR46–8–7P.” The ha

Iconic blue metal Apollo spacesuit connector, approximately 1.5? diameter and 1.75? tall, produced by Air-Lock incorporated for use on the front of th

Kennedy Space Center Saturn S-IVB Upper Stage Measuring and RF Indicator Panel, measuring approximately 19 x 17.5 x 18, labeled at the bottom of the f