RR Auction: Space & Aviation Auction

Flown page from the Gemini V Experimental Procedure Book, 5 x 8, with a tab on the right side reading, “FILM, f,” potentially written in the hand of m

Color satin-finish 10 x 8 photo of the Gemini 5 crew fully dressed in their white spacesuits, signed in black felt tip, “Gordon Cooper, GT5 CDR,” and

Playful color satin-finish 8 x 10 photo of Conrad and Cooper onboard the prime recovery vessel after their Gemini 5 flight, signed in blue felt tip, “

Official color glossy 8 x 10 ‘red-numbered’ NASA photo of the Gemini 7 spacecraft as viewed from Gemini 6 during rendezvous, signed in the lower borde

Color satin-finish 10 x 8 photo of the Gemini 6 crew posing in their white spacesuits, signed in black felt tip by Tom Stafford, and in black ink by W

Fantastic flown bright red-orange survival switchblade pocket knife carried on the Gemini 6A mission, measuring 4.25? long when closed and 7.25? long

Scarce flown Gemini 6 Fliteline gold-plated medallion, 1? diameter, with the front featuring a raised design of the mission insignia and the reverse e

Impressive official glossy 10 x 8 NASA photo of Gemini 8’s Dave Scott and Neil Armstrong posing in their flight suits, signed in black ink by Scott an

Dave Scott’s Gemini Spacecraft 8 manual, 109 pages, 8.5 x 11, February 22, 1966, signed on the front cover in black felt tip. The manual is a flight r

Official color 10 x 8 NASA lithograph of the Gemini 9 crew posing in their white spacesuits, signed in black felt tip by Tom Stafford and Gene Cernan.

Color glossy 9.25 x 7.25 photo of command pilot Tom Stafford in the Gemini spacecraft, matted to an overall size of 16 x 20, signed on the mat in blac

Uncommon color satin-finish 8 x 10 photo of John Young and Michael Collins posing in their white spacesuits, signed by both in black felt tip. In very

Flown surgical scissors carried aboard the Gemini 10 mission, measuring 8.25? long, hand-engraved on the side with the NASA part number, “P/N 20542,”

Flown metal fragment from the Gemini-Titan 10 first stage booster, approximately 1.5 x .5, affixed to a 7.75 x 10 Air Force Space Museum sheet present

Kranz’s laminated badge for the NASA Manned Spacecraft Center, Mission Control Center-Houston, 2.25 x 4, stamped with his name, “Kranz, Eugene F.,” no

Color satin-finish 8 x 10 photo of the Gemini 12 crew prior to liftoff, signed in blue felt tip, “‘Out to launch,’ Charles Conrad, Jr., Gemini XI CDR”

Color satin-finish 10 x 8 photo of the Gemini 11 crew members posing with a small model of their capsule, signed in blue felt tip, “Charles Conrad, Jr

Vintage official NASA 8 x 10 glossy photo of Conrad in a suit and tie, signed and inscribed in blue ink, “To Grace, the girl with the ‘green stuff’—Th

Flown penlight carried on the Gemini 11 mission manufactured by Whirlpool, measuring approximately 5.5? long, with the body wrapped in Velcro and bear

Color satin-finish 8 x 10 photo of the Gemini 12 crew standing in a mockup of their SC12 capsule, signed in silver ink by both. In fine condition. The

Vintage official NASA 7.75 x 10 glossy photo of Lovell in a suit and tie, signed and inscribed in black ballpoint, “To Grace—Best Regards, James Lovel

Flown Gemini 12 Fliteline silver medallion, 1? diameter, with the front featuring a raised design of the mission insignia and the reverse engraved wit

Gemini 12 procedures checklist page certified by the consignor as flown, 5 x 8, headed “Exposure Times for Astronomical Phenomena,” with indicated fil

Two Gemini 12 manuals personally-owned and -used by deputy launch director Walter Kapryan. First is his manual entitled “Gemini Operations Handbook, G

Astronaut and would-be commander of Gemini 9 (1927–1966) who perished in a plane crash before the historic voyage. Handsome vintage official NASA 7.75

Apollo Command Module rotation hand controller with a housing measuring approximately 7.25 x 5.25 x 3 and attached umbilical measuring 160? long; the

Lower Equipment Bay (LEB) Control Panel 105 assembly that comprised part of the Guidance and Navigation interface, 23.5 x 13, bearing a NASA parts lab

Prototype TR204 Saturn V Third Stage Auxiliary Propulsion System Rocket engine, measuring approximately 16? long with a 6.75? diameter nozzle, with a

Flown Apollo Command Module Block I Earth Landing Sequence Controller flown on the Apollo 4 mission, measuring 7 x 4.5 x 3, bearing a large parts tag

Apollo Command Module Block I Display Attitude Gyro Accelerometer Electronic Control Assembly manufactured by Honeywell, measuring 11.5 x 5.5 x 22, wi

Apollo CM Block I Prototype Electronic Display Assembly manufactured by Honeywell, 21.5 x 6 x 5.5, with an affixed parts label reading, “Electronic Di

Apollo Service Module (CSM) Jettison Sequence Controller (Block I configuration), 13.5 x 5 x 5.5, manufactured by Autonetics and bearing an identifica

Apollo Command Module (Block I) AC Over/Under-Voltage Assembly, measuring 17.5 x 4.5 x 7, manufactured by Autonetics. The part label identifies the pi

Apollo Command Module (Block II) Master Events Sequencer Controller (MESC), measuring 12 x 13 x 9, labeled on one side, “Controller—Sequence Master Ev

Nearly complete Apollo Block II circuit beaker panel. This production representative for flight application panel measures 10.5 x 12.75, is numbered “

Apollo Command Module (Block II) Pulse Code Modulation (PCM) Telemetry Assembly, measuring 13 x 7 x 14 and weighing 42.1 pounds, manufactured by Radia

Apollo Command Module (Block II) Central Timing Equipment Module, measuring 8 x 5 x 6, manufactured by General Time Corporation. Stenciled in red belo

Apollo Command Module (Block II) Control and Stabilization System Electronic Display Assembly (EDA) manufactured by Honeywell, 22 x 6 x 6, with an aff

Apollo CM Block II Gyro Display Coupler manufactured by Honeywell, 20 x 6 x 6.5, with an affixed parts label reading, “Coupler Gyro Display, NAA/S &...

Apollo Command Module (Block II) Environmental Control Unit (ECU) Evaporator, measuring 13 x 8 x 6, stenciled on one side with part numbers, “812582-1

Apollo Command Module Block II Acceleration Gauge. Gauge measures 2.25? wide and 5? long, with a dial calibrated from -1 to 15 gs. A Bendix Instrument

Extremely rare Ground Support Equipment RCA-110A Launch Computer Core Memory Module, 8 x 10.25 x 5, bearing an affixed Radio Corporation of America pa

Apollo Command Module Unified S-Band Omni Directional Antenna element manufactured by Amecom Div. Litton Systems, Inc., measuring approximately 4? tal

Apollo Command Module Cabin Temperature Control Valve unit manufactured by Airesearch, measuring approximately 6 x 4 x 3, bearing an affixed parts lab

Apollo Environmental Control Unit Shutoff Valve, measuring approximately 5 x 6 x 3, bearing parts labels affixed to three separate sections, reading:

Apollo Inertial Measurement Unit Inertial Rate Integrating Gyro mockup (inoperative shell only), measuring approximately 5.25? tall by 2.5? in diamete

EVA/IVA Switchbox Assembly, 4 x 6 x 3, bearing an affixed parts tag reading: “Switch Box Assy—EVA/IVA, Stk No. 06362, Part N36-85502041, Contr. NAS9-1

Unflown Apollo data acquisition camera remote control cable. The cable measures 47.5? long and ends with a connector labeled “6924, UR46–8–7P.” The ha

Iconic blue metal Apollo spacesuit connector, approximately 1.5? diameter and 1.75? tall, produced by Air-Lock incorporated for use on the front of th

Kennedy Space Center Saturn S-IVB Upper Stage Measuring and RF Indicator Panel, measuring approximately 19 x 17.5 x 18, labeled at the bottom of the f

Saturn V First Stage LOX Tanking Computer Interface that connected to the Propellant Tanking Computer System, 19 x 14 x 22, labeled at the bottom of t

Saturn switch selector associated with a unit for the Saturn IB/V instrument, serial no. 155, for use with a component of the Saturn IB/V. Unit measur

A Saturn Rocket Switch Selector, measuring 12.5 x 5.25 x 8.5, bearing a Marshall Space Flight Center parts tag affixed to one side, reading: “Pt No. 5

Apollo S-IVB (Saturn V 3rd stage) pressure transducer still sealed in its original package, measuring approximately 4 x 2.5, produced by the Conrac Co

Apollo S-IVB (Saturn V 3rd stage) lightweight flexible tubing mount manufactured by Robinson Vibrashock, measuring approximately 1? tall and 4? in dia

Apollo S-IVB (Saturn V 3rd stage) Hydraulic System stainless steel hose, measuring 28? long, retaining the original yellow parts tag, reading: “For Us

Rocketdyne large unused RP-1 rocket fuel bellows flexline of the type used in early production F-1 engines (through Apollo 4). Component is constructe

A Rocketdyne J-2 Engine Ignition Exciter, measuring approximately 11? long and 3? in diameter, marked in black text on one side, “General Laboratory A

A ground support equipment R-4D rocket engine purge plug. The plug measures 15? long, with the metal parts bearing stamped and stenciled part numbers,

Collection of sixteen Apollo hardware items of various functions, including: four pressure transducers, an absolute pressure transmitter, power cable

Two ground support items designed to protect the spacecraft: a white pouch labeled “Hatch Kit, Hinge Forward Hatch,” identified as “Part No. LDW420-41

Two items: a Lunar Module Program Ground Support Coolant Hose with quick disconnect fitting, measuring 18? long, consisting of a Snap-Tite stainless s

Nice acrylic display containing flown artifacts from all major steps of NASA’s ‘race to the moon,’ measuring 7 x 4 x 1, with each swatch identified be

Two large swatches of Kapton foil, measuring approximately 4 x 7 and 3.75 x 2.25, affixed to an 8.5 x 11 presentation certificate noting that it is a

Complete lot of official color 8 x 10 and 10 x 8 NASA lithographs of all twelve moonwalkers posing in their white spacesuits, signed and inscribed in

Fantastic archive of material from the collection of Hasselblad executive Osten Wejerfelt, whose company manufactured the cameras used by NASA beginni

An unmistakably unique archive of material from the personal collection of Space Age pioneer Dr. Walter J. Kapryan, the Apollo Launch Director at Kenn

Andriyan Nikolayev’s incredible collection of thirty-eight photographs signed and inscribed to him in ink and felt tip by various aviation and aerospa

Remarkable color semi-glossy 13.5 x 10.5 photo of Earth, affixed to its original 19.75 x 15.75 mount, signed on the mount by forty-one astronauts in v

Sought-after official color semi-glossy 10 x 8 ‘red–numbered’ NASA photo of footprints on the lunar surface, signed and inscribed in blue felt tip by

Exceptional color 23.5 x 30 print by R. L. Rasmussen entitled ‘Navy to the Moon,’ showing a rocket shooting into space and two astronauts on the lunar

Beautiful color limited edition 26 x 32 lithograph by Alan Bean entitled ‘In the Beginning,’ numbered 882/1000, signed in pencil by 20 Apollo astronau

Collection of six color photos featuring various moonwalkers, ranging in size from 8 x 10 to 10.5 x 8, signed and inscribed in ink or felt tip by the

Five 10 x 8 photos of moonwalkers saluting the American flag on the lunar surface, various finishes, each signed in ink or felt tip by the astronaut d

Wondrous color semi-glossy 7 x 5 photo of the famous ‘Earthrise,’ affixed to its original 14 x 11 mount, signed on the mount in black felt tip by five

Appealing collection of six photos signed by astronauts from various Apollo missions, all but one of which are official NASA lithographs, 8 x 10 and 1

Color satin-finish 10 x 8 photo of Edgar Mitchell on the lunar surface, signed and inscribed in black felt tip, “Alan Bean, Apollo 12, 4th Man on the

FDC with a cachet honoring the 20th anniversary of the moon landing, signed in blue felt tip by moonwalkers Charles Conrad and Dave Scott, and in blac

Felt tip and pencil sketch on an off-white 20.25 x 17 sheet of artist’s cardstock, showing a caricature of Wendt falling over backwards at Cape Canave

Stunning Omega Speedmaster Professional wristwatch. Black-faced, stainless steel chronograph, manual wind wristwatch with a Plexiglass crystal, solid

Detailed 1/32 scale model of the Apollo Command Module, measuring 12.25? long, suspended from its black wooden base at a height of 9.5?. Satellite dis

Complete set of Beta cloth swatches from every manned Apollo mission, ranging in size from 8.25 x 8 to 8.75 x 10.25, each bearing the respective missi

Exceptional display of beta cloth patches depicting the eleven manned Apollo space mission insignias, ranging in size from 3 x 3 to 4.75 x 4, and enci

Impressive collection of patches and decals honoring several lunar module missions, including: nine embroidered patches observing various mission and

Exceptional set of embroidered Apollo patches covering the program’s seven moon-landing missions, each measuring approximately 4? in diameter. In over

Ten laminated NASA firing room access badges from the Apollo and Skylab programs, 2.5 x 3.75, including badges for Apollo 9, 10, 14, 15, 16, and 17; S

Eight launch passes for Apollo 12 through Apollo 17, 4 x 2.5, including two different color variations for both Apollo 16 and 17. In overall fine cond

Seven laminated or cardstock viewing stand access passes for the early Apollo missions, approximately 2.5 x 4 and 4 x 2.5, including: two for Apollo 4

Collection of eleven items, including: nine individual decals for the Apollo Launch Team, Apollo Lunar Team, Project Apollo Recovery Team, ‘Eyes on th

Attractive framed display of pins representing every manned mission from the Apollo, Apollo-Soyuz, and Skylab programs, each measuring approximately 1

Large collection of 36 matchbooks honoring the Apollo program, most featuring images of the various mission insignias, including: one for Apollo 7; on

A fine limited edition set of 20 solid sterling silver commemorative medals struck by the Franklin Mint from silver containing a small amount of metal

NASA Exceptional Service Medal issued to Elizabeth R. Covert in 1978, measuring 1.5? in diameter and suspended from a 1.5? long blue-and-gold ribbon p

Collection of over 20 lunar maps, including: a set of seven maps published by the US Geological Survey between 1970 and 1972, including geological map

Unbound period photocopy of the Grumman “Apollo Operations Handbook, Lunar Module 4, Volume I, Subsystems Data,” September 15, 1968, 8.5 x 11, totalin

Color vintage semi-glossy 10 x 8 ‘red-numbered’ NASA photo of the Apollo 1 crew posing in their blue flight suits with a model of their capsule, signe

Print of a stamp design honoring the deceased Apollo 1 astronauts by artist Bob Drinon, 11.25 x 8.5, signed on the borders in various inks by an impre

Rare original hand-painted artwork of a version of the Apollo 1 mission patch, accomplished by designer Al Stevens in watercolor on an off-white circu

Original hand-painted artwork of the Apollo 7 mission patch, accomplished by designer Al Stevens on an 11.5 x 11.5 mount, signed and inscribed on the

Exceptional flown American flag carried aboard Apollo 7, 6 x 4, signed and flight-certified in black ballpoint, “This flag flew on Apollo 7. Walt Cunn