RR Auction: Space & Aviation Auction

Uncommonly early color vintage 8 x 10 NASA photo of Young in his Gemini space suit, signed and inscribed in black felt tip, “To Nancy, With best wishe

Glossy 8 x 10 NASA photo of Cooper in the cabin of the Gemini 5 capsule, signed in black felt tip, “GT 5 Cabin, 1965, Gordon Cooper.” In fine conditio

Color satin-finish 10 x 8 photo of the Gemini capsule, signed in silver ink, “Frank Borman, Gemini 7 CDR,” and “Wally Schirra, Gemini 8 CDR.” In very

Satin-finish 8 x 10 close-up photo of McDivitt shortly before his Gemini mission, signed in green felt tip, “Jim McDivitt, Gemini IV Cdr.” In very fin

Color 10 x 8 NASA photo of the Gemini 4 prime crew, signed in black felt tip by McDivitt. In fine condition.

Color satin-finish 8 x 10 photo of Stafford suited up in his Gemini IX flight suit, signed in black felt tip. In very fine condition.

Uncommon color 8 x 10 NASA photo of the lift-off of Gemini-Titan 1, signed in black felt tip, “First launch of Project Gemini, Guenter F. Wendt, Pad L

Color 10 x 8 NASA photo of the Gemini 11 crew holding a model of their capsule, signed in black felt tip by Richard Gordon and Charles Conrad. In fine

Color vintage glossy 11 x 9 McDonnell Aircraft Corporation photo of the Gemini capsule loaded in the rear of a cargo plane, signed in black felt tip b

Three color vintage 8 x 10 NASA photos of the Gemini astronauts, each signed in black felt tip, with two inscribed to “Nancy.” Signers are: Michael Co

Ink signatures, “James A. McDivitt” and “Edward H. White,” on individual off-white 4 x 2.75 cards bearing affixed newspaper photos. Nicely matted with

TLS, one page, 7.75 x 10, NASA letterhead, April 26, 1966. Letter to a New York advertising manager. In part: “Thank you very much for sending the sam

Color 6 x 4 postcard of Ed White making his historic space walk, signed on the reverse in green felt tip by McDivitt. In fine condition, with a small

Program for a Gemini Commemorative Dinner presented by the US Space Walk of Fame Foundation on July 16, 1996, 5.5 x 8.5, two pages, signed on the fron

Four different Gemini commemorative covers, each with a cachet from a different mission, each signed in ink or felt tip by a member of the respective

Two commemorative covers with cachets honoring the naval recovery force, one signed in blue ballpoint, “Thomas P. Stafford, Astronaut,” and the other

Gemini 4 launch cover signed in black ink by Ed White and James McDivitt, and also bearing an autopen signature of John Young, as well as a Gemini 3 l

Original commemorative portfolio entitled Gemini 11: You Were There, 8 x 10.5, September 15, 1966, signed on the front cover in black felt tip, “Richa

Commemorative cover with a cachet honoring the Gemini 11 mission, signed in black felt tip by Dick Gordon and Charles Conrad. In fine condition.

Launch date commemorative cover with a cachet honoring Gemini 11, signed in blue ink by Charles Conrad and black ballpoint by Richard Gordon. In fine

Set of 20 different blueprints for various systems of the Gemini Capsule, 17 x 11, including power systems, “retrograde sequential system,” “post impa

Signed book: Project Gemini: A Chronology. NASA SP-4002. Washington, D. C.: NASA, 1969. Softcover, 8 x 10.25, 307 pages. Signed on the front cover in

Novelty record label, 4? in diameter, produced by Kapp Records for a fictitious ‘Molly Brown’ record, starring Gus Grissom and John Young. In fine con

Official John F. Kennedy Space Center vice presidential tour badge, February 22, 1965, 3.25 x 5, featuring an image of the presidential seal in the ce

Circular slide rule labeled “Agena Maneuver Slide Rule, S/N 204,” with part number SD-AE-005628, 7.5? in diameter. This item was used in Mission Contr

Very rare and highly important Apollo Lunar Module Flight Director Attitude Indicator (FDAI). Unit measures approximately 5.75 x 5.75 x 11, with the t

Early Apollo Block I control panel, #25, measuring 20.25 x 13.5, with 5 rows of switches and circuit breakers for Post Landing systems, the Stabilizat

Scarce unflown Block II Apollo sextant. Metal cased unit measures approximately 7 x 6 x 6, with parts having serial numbers SN EE-1 and SN EE-2. The s

Incredibly rare Lunar Module Translation Control Assembly. Assembly measures 7.75 x 8 x 5, and bears a Grumman Aircraft Eng. Corp label on the top, li

Rare Apollo Rotation Hand Grip Controller. Controller housing measures 7.25 x 5.5 x 3, and is labeled on the face “1,” with its attached umbilical mea

Set of Apollo Command Module (Block I and Block II) optics used in connection with the Sextant and Scanning Telescope for guidance navigational purpos

Flight-ready Lunar Module deployment truss manufactured by Grumman Aircraft. This piece comprised part of the structural-mechanical assembly between t

Unflown numerical display panel from the Apollo Guidance Computer Display and Keyboard (DSKY) unit. Assembly is constructed of glass, metal, and rubbe

Limited edition replica Apollo rotational hand controller, #AP3/1500, affixed to a 5 x 8 wooden base, with two small plaques affixed to the base and a

Model of the Apollo Command Module reproduced at a scale of 1:48, approximately 9? tall and 3.5? in diameter, signed on the sides in black felt tip by

Unused Apollo Command Module Lithium Hydroxide canister, identical to the ones carried during the Apollo missions. Square canister measures 7.25 x 7.2

NASA Apollo-era countdown clock. Digital countdown clock measures 19 x 3.5 x 3, and displays the countdown in days, hours, minutes, and seconds and is

Rubber eyepiece 2´ in length with a 1´ diameter eye hole. A NASA identification tag is attached to the piece and reads, “P/N 2011879, Lot ...

Unique limited edition presentation of flown fragments from Apollo 7 through 17, as well as an Apollo 1 relic, 1/1. All 12 fragments are set against a

Portion of the honeycomb VCOAT 5026-39HCG heat shield test block material for the Apollo Command Module Thermal Protection System from 1966, 5.75 x 2

Long Apollo-era high pressure pneumatic hose. Hose is wrapped in silver cloth braid with screw-on connectors at each end, bearing a metal tag engraved

Apollo Lunar Module Cabin Fan Filter. Filter measures 10 x 17 x 7 and was made by American Air Filter for NASA’s Grumman Aerospace Corporation, with “

Huge hard bound Apollo Mission Simulator Instructor Handbook, Volume II, Spacecraft 012, dated April 1966, by North American Aviation, Inc., 10 x 11.5

Very neat and unusual vintage-era collection of Apollo three-dimensional hand-painted mission emblems for Apollo missions 11–17. Each emblem measures

Desirable complete set of 21 Lion Brothers patches. Patches included are Apollo 1, Apollo 7 (2), Apollo 8, Apollo 9, Apollo 10, Apollo 11 (2), Apollo

Collection of 25 ruby bearings made for the Apollo program. Rubies are housed in a plastic screw-top vial with a Corning label affixed to the side, wi

A complete set of Lion Brothers Apollo patches. Included are Apollo I, and Apollo 7–17. In fine condition. A well preserved collection, seldom offered

Artist who was formally a NASA suit technician supporting the early shuttle missions. During the Apollo program Woods worked for ILC as a suit technic

Spare Beryllium gear housing. Intricate housing measures 5? in diameter and is believed to be a spare part of the Lunar Gravimeter. In fine condition.

Collection of 16 Beta cloth swatches from the Apollo program, almost all approximately 9 x 9, with one 5.5 x 5.5, each bearing a printed mission insig