RR Auction: Space & Aviation Auction

Limited edition Gemini 11 replica flight plan, #47/50. An exact replica of the actual flown Gemini 11 Flight Plan including the paper stock, graphics,

Vintage glossy 8 x 10 NASA photo of the lift off of Gemini 3, carrying Grissom and John Young into orbit, signed in blue ballpoint by Grissom. Some sc

First African-American astronaut (1935–1967) who was killed in a crash of an F-104 Starfighter at Edwards Air Force Base. Rare commemorative cover wit

Color satin-finish 8 x 10 photo of Lovell in his space suit prior to the launch of Gemini 7, signed in black felt tip, “James Lovell, Gemini 7.” In ve

Flown uncommon oversized printed fabric American flag, 17.75 x 11, carried on board the Gemini 7 spacecraft in December of 1965. Signed on a white str

During his years as a test pilot and before becoming an astronaut, Jim McDivitt used this ‘knee pad' during his flights. The pad measures 6 x 9....

Homemade souvenir commemorative cover with an affixed cachet honoring space travel, bearing a May 15, 1963, Cape Canaveral postmark, signed in black i

Wally Schirra’s handwritten Gemini VI PPK manifest, in pencil, one page, 2.75 x 5. This list was submitted pre-flight to Deke Slayton, Chief of the As

Vintage glossy 8 x 10 NASA photo of See in a jacket and tie, signed in black ink. A slight crease to the upper left corner and light block of toning t

Group Three astronaut (1932–1967) who died in a crash of a NASA T-38 jet trainer near Tallahassee, Florida. Rare color vintage 8 x 10 NASA photo of Wi

Flown printed fabric New Zealand national flag, 6 x 4, flown aboard Gemini 10, signed in silver ink “Flown GT–10, John W. Young.” In fine condition.

Apollo-era Hasselblad 70 mm EL Data camera intended for application on the lunar surface, “P/N SEB 33100040-301, S/N 1038,” with attached film magazin

Rare Apollo Rotation Hand Grip Controller. Controller housing measures 7.25 x 5.5 x 3, is labeled on the face “1,” with its attached umbilical measuri

Hand painted animation cel, 12.25 x 10, showing a command module approaching a lunar module ascent stage. Cel was used during the Apollo missions to s

Nine items: complete set of 12 matchbooks, each commemorating one of the Apollo missions plus one honoring presidents John F. Kennedy, Lyndon B. Johns

An eclectic mix of approximately 40 pieces of paper currency, coins, and novelty pieces accumulated by Gene Cernan during a 1973 trip around the world

Scarce Apollo Mission Simulator Maintenance and Repair Procedures Manual, General Precision Inc., Section VIII, housed in a three-ring binder, measuri

Eleven photos of various finishes, including four color NASA photos, each approximately 8 x 10 or 10 x 8, including three photos of the moon, one phot

A red streamer, measuring 3 x 14.5, with “Remove Before Flight” printed on the front, and numbered DTT 575118, and return if found instructions printe

One block of 40 8-cent stamps, 9 x 10.25, with images honoring the Apollo space program. In fine condition, with the left border folded and light pape

LR-101 thruster nozzle, the type used on the Mercury Atlas as the Vernier Thruster, intended for application on the Atlas, Thor launch system. Nozzle

Apollo A7L Suit Liner, made by International Latex Corporation. Suit bears a manufacturer’s label inside the collar which reads, “Spec. CP 2001 liner

Fantastic and very detailed NASA KSC PAO contracted (by blueprint) high fidelity, model mock-up of the Apollo A7L spacesuit. The one-piece off-white s

Apollo-era AC Control Box and AC Sensor Assembly, approximately 14 x 8 x 5, consisting of a “Box Assy-A C Power Control Unit,” S/N 063b2AAJ0431, a “Se

Apollo program electrical adapter in original packaging and box. Cylindrical adapter measures approximately 5.5? long with "North American Avia...

A model of the Apollo command/service module and escape tower, 20.75" tall, made by the Walter J Hyatt Company for the North American Aviation,...

Extremely critical Apollo/Saturn and early Space Shuttle Range Safety equipment, used by NASA on all the Apollo/Saturn flights as well as the first si

Color 13.75 x 11 Grumman plate print, titled at the bottom, “Plate 1. Apollo Lunar Module (Astronaut deploying ALSEP),” signed in black felt tip by 10

Grumman Apollo Lunar Module Contractor's model, manufactured for Grumman by Precise Models, Inc. prior to the Apollo 11 moon landing. The two-pi...

Original NASA/Grumman Apollo Lunar Module brochure, 8 x 10, featuring eight clear acetate pages with detailed color illustrations of the Lunar Module,

Magazine entitled “The Astronauts & Their Families,” printed in 1965 by World Book Encyclopedia Science Service, 71 pages. Signed on the front c...

Original NASA/Grumman Apollo Lunar Module Transgraphic Brochure. This brochure measures 8 x 10 and features eight clear acetate pages with detailed co

Color 10 x 8 NASA photo of the Earthrise taken from Apollo 8, signed in black felt tip by James Lovell, Edgar Mitchell, Richard Gordon, Charlie Duke,

Limited edition replica Apollo rotational hand controller, #AP3/1500, affixed to a 5 x 8 wooden base, with two small plaques affixed to the base and a

Ink and felt tip signatures of 15 Apollo astronauts on two 5 x 7 pieces of off-white foamcore, with each piece of foamcore bearing a 4? diameter Ameri

Apollo 11 Translunar/Transearth Trajectory Plotting chart, 23.75 x 20, dated June 23, 1969, originally from the Trimble estate, with pencil notations

NASA KSC PAO contracted (by blueprint) high fidelity, model mock-up of the Apollo A7L outer moon boot. Boot measures 12.75? long, and is comprised of

Very likely one-of-a-kind Apollo Buddy Secondary Life Support System. Part is designated Class III for training, with “Class III” etched into suit con

Apollo-era Oxygen Hose assembly. White rubber oxygen hose with blue anodized aluminum air and communications couplings at both ends, measures a little

Unflown and unopened packet of cocoa. Sizable amount of cocoa is contained in its 3.5 x 13 pouch, with drinking nozzle at the top. Label near bottom r

Apollo strut assembly, possibly for the command module descent stage. Strut measures 53? long, with five metal collars (three full and two half), all

An Apollo-era Communications Carrier Electronic Module(CCEM), Part No. 16495G-02, S/N 286. This module is the hardware component of the Communication

Huge Apollo-era control computer. Computer measures 12.5 x 24 x 8, and weighs 53 pounds. Side panel bears a Marshall Space Flight Center label which r

Apollo Astro Comm Display control panel. stamped on the reverse with a Ge assembly number, measuring 10.5 x 19 x 6. Panel is headed at the top, “Astro

Apollo-era control panel face for Lunar Module Panel 8, 30 x 7.5, used as a mock-up or for a simulator, with 15 switches, several for audio controls,

NASA Countdown clock measuring 19 x 18.5 x 7.25. This digital countdown clock is a stack of two separate digital readouts, the first of which is label

Apollo Earth Orbital Experiments booklet, 8 x 10.5, August 1, 1966. A publication prepared by the Experiments Program Office that outlines experimenta

Small Beta cloth flight pouch, 2.25 x 2.75 x 1, labeled on the top of the cover in red ink “III,” S/N SED4-6108401-701, with a Velcro strip to keep co

Unbound Handbook of Lunar Soils, Part I: Apollo 11–15 handbook, 8.5 x 11, dated July 1983, 421 pages. Introduction states “The purpose of this handboo

Interesting Apollo-era heart rate gauge, approximately 1.5 x 5 x 5, made by Triplett Co. with a graduated white face and two red adjustable indicators