RR Auction: Space & Aviation Auction

Neat display of the Apollo-Soyuz and all three Skylab mission insignias, on paper, with each insignia contained in a 1.5? diameter Lucite ball. Each l

NASA CSM Malfunction Procedures manual, Revision A, 8.5 x 11, prepared by the Flight Planning Branch, Crew Procedures Division, and dated September 1,

Huge printed manual entitled “Skylab Preliminary Flight Mission Rules,” Parts1-3, dated June 21, 1972, 8 x 10.5, bound by a single staple in the left

Color 10 x 8 NASA ‘floating heads’ photo, signed in black felt tip by all nine astronauts: Charles Conrad, Joe Kerwin, Paul Weitz, Alan Bean, Owen Gar

Three Skylab II menus, one for each crew member, one for Day One and two for Day Two, each with a Skylab II mission insignia affixed to the top, each

Two Skylab I menus, each 8.5 x 11, and each having a Skylab I mission insignia affixed at the top: an SML Menu Day 3 signed in black felt tip by Paul

Two original canisters of 16mm film from Skylab 3. Both canisters measure 12.5? in diameter. One is a silent color film labeled “Skylab-3 day-230. Off

Three flown relics from Skylab III: a small circular piece of a bungee cord; a swatch of soap; and a stamp made from the ink of Jack Lousma’s pen whic

Skylab 4 Recovery cover with a cachet honoring the naval recovery force, and bearing a USS New Orleans February 8, 1974 cancellation, signed in black

Skylab 4 Naval Recovery cover with a cachet honoring the Naval recovery force, signed on the front in black felt tip by Jerry Carr, Bill Pogue, and Ed

Flown NASA ‘meatball’ insignia patch, taken from one of Weitz’s tan in-flight jackets worn on board Skylab in 1973. Beta cloth patch measures 3.75 x 3

Flight-ready duct fan intended for mounting in the Skylab Orbital Workshop space station ventilation control subsystem. Cylindrical fan assembly measu

Orbiter second generation, early prototype hard window cover. Cover measures approximately 32.5 x 30. Constructed inside the Orbiter Processing Facili

Available to US bidders only. Unusual light emerald-color fit-check tile, 6 x 6 x 3, used to fit-check the shape and size of the thermal protection ti

Shuttle Solid Rocket Booster Aft Thermal Skirt. Heavy duty skirt measures 62 x 29, and consists of a quilt-like material, with 10 vertical pockets and

Flown System Tunnel, four sections, each measuring approximately 18.5? long with various serial numbers. Each tunnel portion retains original paint wi

Super neat Space Shuttle High Pressure Insulation Cartridge for separation bolts. Six-sided two-tiered honeycomb construction cartridge measures appro

Solid Rocket Booster Forward Skirt Door Gasket. Curved metal framed forward skirt door gasket measures 36.5 x 39. Gasket has been changed out and deco

Available to US bidders only. Flown internal wing structure assembly insulator from the Space Shuttle Endeavour, serial number 25167-005, measures 16

Three flown pieces of Space Shuttle hardware, flown inside the payload bay: a two-piece Connector Bracket, 12.75 x 10.5, #IK00159-453, complete with T

Early Space Shuttle mission patch. Triangular patch measures 4.25? high with a gold border. In fine condition.

Collection of three relics from the Shuttle program: a clipped segment of Jack Lousma’s personal orbit checklist flown on Columbia’s STS-3 mission; a

Space Shuttle SpaceLab Flight Unit 2 Damping Plate, flight hardware piece. Plate measures approximately 8.5 x 8.25 and is sealed in plastic with its D

Available to US bidders only. Light weight silver finish insulation pad, measuring approximately 11.5 x 8 x 2 with four snaps, and restraint buttons o

Available to US bidders only. Shuttle curved fit check tile, 7.5 x 6 x 2.75, marked “S/N #C68128,” with other notations on the same side. Before crews

Space Shuttle Cord Assembly, measuring 22" overall. A communications cord for the Launch and Entry Suit (LES) Helmet, with leads at helmet end ...

Available to US bidders only. Very rare Challenger-flown LRSI (Low-temperature Reusable Surface Insulation) tile, 5.5 x 8, #V070-195002-376-008731, an

Rare 1985 Space Shuttle Challenger Pepsi can. On one side is the Pepsi and Pepsi-Cola logos. The back reads "Young Astronaut Program United Sta...

Available to US bidders only. A 1.75 x 1.5 x 1 scrap of orbiter thermal protection tile. Tile is accompanied by a printed caption which reads, “This p

Scarce unopened 1/25 scale paper model of the Gamma Ray Observatory, 19 x 25, produced by TRW Space and Technology Group in 1991. Model is sealed in i

Spiral-bound manual entitled “An Orientation–Training Course on the Redesigned Solid Rocket Motor (RSRM),” 11.25 x 8.5, 203 pages. This internal manua

Two flown printed fabric flags, one Soviet Union and one United States, both measuring 5.5 x 4, carried on board the shuttle Atlantis mission STS-30 i

Detergent wipes, bagged for flight, with an overall size of 5.5 x 10, with a label reading “Detergent Wipe,” with a 2003 expiration date, a serial num

Flown Flexible Insulation Blanket, 10 x 6.25, made of low-density fibrous silica batting material, taken from the exterior of an unknown Orbiter by a

Flown-used Discovery #2 main engine gimbal bolt flown on the space shuttle Discovery mission STS-95 during John Glenn’s return to space in 1998. Bolt

Three different parts from the Space Shuttle Main Engine (SSME). A 1.5? diameter cover with two numbers impressed on the top as well as “Symetrics”; a

Available to US bidders only. A nice collection of six flown Orbiter TCS (Thermal Control System) blankets, various sizes, and configurations ranging

Space Shuttle Solid Rocket Booster Aft Skirt Connector Plate. Plate, S/N 2000153, measures 24.25? long. This piece would wind circularly all the way a

Large “Remove Before Flight” protective cover, 20.5 x 33.5, stenciled in red paint “Remove Before Flight.” Panel also bears a Rockwell International S

Available to US bidders only. Shuttle TCS payload bay blanket. Blanket, most likely flown, #V070-366505-016, measures 11 x 3.5, and is labeled “Scrap”

Available to US bidders only. A flown section of shuttle wing insulation from one of the orbiters. Section and measures approximately 18 x 10 x 5 and

Shuttle Thermal Barrier Assembly, two separate pieces. One piece measures 44.5? long, with other piece measuring 11? long with “Trim to this edge” wri

Flown space shuttle solid rocket booster SRM field joint splice plate (Systems Tunnel 90°), flown on space shuttle Discovery mission STS-82, la...

Large eight-ounce bottle of No-Rinse hair conditioner. This conditioner was done by NASA contract and made to be used on board the space shuttle and t

Shuttle Solid Rocket Booster system tunnel. Front portion of the splice plate system tunnel measures 4.5 x 5.5, is labeled in an unknown hand “Class 3

A packet of five bolts flown on Spacelab-2, carried on Challenger mission STS-51F. Packet is sealed in plastic, with a KSC 4-8A form filled out by a t

Huge flown Mission Control patch, 11.5? in diameter, carried on board the Atlantis on STS-27 from December 2–6, 1988. Accompanied by a 1988 letter fro

Flight-ready Wide Band Signal Conditioner, 6 x 6.25 x 11. Conditioner has two manufacturer’s labels, one from Aydin Vector, “Wide Band Signal Conditio

Two color 10 x 8 NASA crew photos: one of STS-95, signed in black felt tip by John Glenn, Curt Brown, Steve Lindsey, Stephen Robinson, Scott Parazynsk

Flown aluminum slag sample, carried on board shuttle mission STS-65. Small sample is a piece of unburned aluminum propellant from the shuttle’s solid