Extraordinary & Historic Firearms Auction

SN 414. Cal. 6.5mm Bergmann. This early M1894, Number 3, with hexagonal chamber, was made by the Bergmann company with no extractor, which characteris

SN 898. Cal. 6.5mm Bergmann. Theodor Bergmann was an early pioneer in the development of European semiautomatic pistols in the early 1890s and early 1

NSN. Cal. 7.8mm. Prior to initiating production of the M1897, Bergmann made a number of prototypes. Most were based on the M1896, No.4, scaled up for

SN 156. Cal. 7.8mm. Bergmann made approximately 1,000 M1897 pistols. This example has a 3" bbl whose shroud is affixed with a drift adjustable ...

SN 117. Cal. 7.8mm. Bergmann made approximately 1,000 M1897s. During its production there ensued a number of variations, largely directed to the milli

SN 410. Cal. 7.65mm. Mannlicher made very few pistol carbines with long bbl and tangent sight. This example has a 6" bbl with an elevated drift...

SN 27. Cal. 8mm. Only a handful of Krnkas are known in the collecting community. An exceedingly scarce pistol, it has been variously termed Krnka, Rot

SN 13. Cal. 7.5mm. An extremely unusual repeating pistol whose breech block operates through transverse horizontal movement. The gun is fitted with a

SN 6. Cal. 8mm. In his quest to design a reliable semiautomatic pistol, Josef Laumann made a number of prototypes, most of which were produced for Aus

NSN. Cal. “8.5mm Borchardt”. Although Hiram Maxim is best known for his machine guns and sound suppressors, he also collaborated with his workshop for

SN 24. Cal. 6.5mm. According to Motz/Schuy “Vom Ursprung der Selbstladepistole”, about 70 M1894s were made in Switzerland. All had a small frame and a

SN 16. Cal. 7.6mm. Mannlicher made approximately 100 large frame M1894s in caliber 7.6mm. Early pistols, as this example, had a flat hammer. Once prod

SN 183. Cal. 7.63mm. Despite their antique status, Schwartzlose pistols have the look of a modern gun. Many were reportedly shipped to Russia or were

SN 7787. (ca 1886) Cal. .577 1-5/8". 6-1/2" Oval bore rifled bbls are engraved "Charles Lancaster (Patent) 151, New Bond St. London.&...

SN 62. (ca. 1880) Cal. .476. This unusual pistol has a cluster of four 6" bbls hinged to frame, chambered for the Enfield military cartridge, a...

SN 366. Cal. 476. Very rare & unusual British revolver with 6" ribbed bbl, fixed sights with 6-shot fluted cylinder and checkered 1-pc waln...

SN 78. Cal. 10.55mm German Ordnance Revolver. Beautiful commercial version of the Army revolver with 6" oct to rnd bbl that has cannon muzzle a...

Cal. 42. Fine Adams Patent percussion revolver with 6-1/2" oct bbl, fixed sights with replacement front sight blade, rammer mounted to left sid...

SN 30. Cal. 10.6mm Rimmed. Blue finish with 18-5/8" oct to rnd bbl, German style ramp front sight with matted top and 2-leaf, one standing, rea...

Cal. 10.6mm Rimmed. This is a very rare example of Paul Mauser’s last attempt to make the Zig-Zag revolver acceptable for military service, a patent m

SN 1798. Cal. 10.6 Rimmed. Nickel finish with 5-5/16" keyhole shape bbl that has integral front sight and fixed rear sight in the top strap. Gr...

SN 106. Cal. 7.6mm Rimmed. Blue finish with 3-5/8" keyhole shape bbl that has integral front sight and fixed rear sight in the top strap. Frame...

SN 6. Cal. 7.63mm Borchardt. Exceptionally rare pistol with short 6" tapered rnd bbl, barley corn style front sight that is integral with the r...

SN 266. Cal. 7.63 MM Borchardt. Spectacular cased Borchardt pistol that was presented to General Porfirio Diaz, President of Mexico. Pistol is a stand

SN 89382. Caliber 7.63mm. Prewar Commercial with 5.5” bbl and slip-in 50-1000 rear sight. Usual chamber address and full serial number on left chamber

SN 43845. Cal. 9mm Export. Mauser made relatively few six shot pistols, especially in 9mm Export. Any presentation gun is a rare find and to encounter

SN 50740/50741. Caliber 9mm Para/7.63mm). Consecutive pair of salt blued M711 pistols, serial numbers in the mid-range of M712 production, with 5.5” b

SN 3547. Cal. 7.63mm. Standard early production Conehammer with 5.5" bbl and pinned 1-10 rear sight. Usual chamber address with Crown/Crown/U m...

SN 8. Cal. 7.63mm. The Turkish Contract was Mauser's first government contract sale of its C96. These Conehammers were assigned a separate seria...

SN 1899. Caliber 7.63mm. Standard production Conehammer with 5.5” bbl and pinned 50-500 rear sight. Usual chamber address with Crown-U mark on left si

SN 34834. Caliber 7.63mm. Full size C96 with large ring hammer, 5.5" bbl and slip-in 50-1000 rear sight. Usual chamber address with the serial ...

SN 12134. Cal. 7.63mm. This scarce and rarely encounter C96 six shot has a 5.5" barrel with a pinned 50-500 rear sight. Usual chamber address a...

SN 7335. Cal. 7.63mm. Scarce Conehammer reworked to have a later type bbl assembly with a 4" bbl and 50-1000 rear sight. Standard chamber addre...

SN 5939. Cal. 7.63mm. This mid-production Conehammer has 5.5" bbl and pinned 1-10 rear sight. Usual chamber address with a Crown/Crown/U mark o...

SN 8086. Cal. 7.63mm. Mauser made relatively few 6-shot pistols, Conehammer variations being the earliest and most desirable. This gun has a 4.75&qu...

SN NSN (1A). Caliber:7.63mm. Large Ring Hammer Flatside with 5.5” bbl and slip-in 1-10 rear sight. Usual chamber address. No visible serial number on

SN 6463. Caliber: 7.63mm. Standard mid-production Conehammer with 5.5” bbl and pinned 50-500 rear sight. Standard chamber address with Crown-U marking

SN 79242. Caliber 9mm. Standard Red 9 with 5.5’’ bbl with 50-500 slip-in rear sight. Standard chamber address and full serial number on the left chamb

SN 81753. Caliber 9mm. Standard Red 9 with 5.5’’ bbl and 50-500 slip-in rear sight. Cursor is missing the plunger-stop and spring. Standard chamber ad

SN 919664. Caliber 7.63mm. Late M1930 Commercial with 5.5’’ bbl and 50-1000 slip-in rear sight. Usual chamber address with Crown-U marking on the left

SN 447115. Caliber 7.63mm. One of a small group of factory rebarreled small ring Bolos in the 445,000-448,000 serial range which have a 5.5” barrel sc

SN 432499. Caliber 7.63mm. The French Gendarme pistols were assembled with a Bolo bbl extension and a frame having a full size grip. This pistol has a

SN 261882. Caliber 7.63mm. This Prewar Commercial was reworked in the 1930s to have a M1930 bbl assembly, with solid rails, fitted to a Prewar RFV-mar

SN E/48012. Caliber 7.63mm. Large Ring Hammer pistol with 5.5” bbl and fixed rear sight. Usual chamber address. No external serial numbers and no proo

SN 713453. Caliber 7.63mm. Standard Mauser Banner Bolo with 4” barrel and slip-in 50-1000 rear sight. Usual chamber address with Crown-U marking on le

SN 89778a. Caliber 7.63mm. Mauser made very few Bolos in the serial range usually used for Pre-war Commercials. This example has a 4" bbl and a...

PLEASE NOTE (10-13-13): The catalog correctly states that there is no manufacturer’s serial number, manufacturer’s marks, etc. on this item. That is e

SN 30. 4-3/4" .30 Cal bbl with orig matching SN. Hand engraved Swiss Cross in sunburst on chamber with central engraving guide dot. Blank cente...

SN 10030B. This is one of three prototype 9mm pistols that were personally delivered and demonstrated by George Luger to the U.S. Board of Ordnance in

SN 9903. 4-3/4" 30 Cal. bbl. "DWM" scroll on center toggle link. Dished toggles. Crown/D GPK inspector’s acceptance mark on right rec...