Extraordinary & Historic Firearms Auction

SN 1. Caliber 7.65mm. Very unusual Transitional Pistol is effectively a heavier and enlarged version of the M1910 to accommodate the more potent 7.65

SN 421822. Caliber 7.65mm. Mauser engraved very, very few of its pocket pistols. This M1914 differs from standard production guns in that there was no

SN 1. Caliber 7.63mm. This well known and previously photographed six shot cutaway has a 4" bbl and a fixed rear sight. Early features include ...

SN 24. Caliber 7.63mm. Mauser made fewer than 200 System Mauser marked guns with a stepped bbl. This well known gun, having been shown in many of Jose

SN 8437. Caliber 7.63mm. One of just a handful of 20-shot pistols in a very well established and narrow serial range clustered around 84XX. This gun h

SN 757. Caliber 7.63mm. Mauser only made a handful of twenty shot C96s in this serial range. All had a 5.5" bbl and a pinned 1-10 rear sight. U...

SN 40. Caliber 7.63mm. Mauser made about 100 twenty shot Flatside Conehammers in a separate serial range numbered 1-100. There is a variance in detail

SN 14021. Caliber 7.63mm. Mauser assembled a small number of Conehammer pistols with Bolo bbl assemblies. Most had a ten shot frame and some had a six

SN 5. Caliber 7.63mm. Single digit Flatsides are assumed to have been made for displays and presentations. This example has a 5.5" bbl and a sl...

SN 359. Caliber 7.63mm. This Large Ring Flatside Carbine has a screwed in 16" bbl with a dovetailed front bead and a slip-in 50-500 rear sight....

SN 1021. Caliber 9mm Export. Mauser made just over 1000 carbines that were numbered in a separate serial range. As one of the last examples, this carb

SN 252. Caliber 7.63mm. Mauser made approximately 200 Large Ring Flatside carbines. This example has a 12" bbl with a hooded, drift adjustable ...

SN 697. Caliber 7.63mm. Mauser made relatively few Large Ring Carbines. This mid-production example has a 16" bbl with a drift adjustable bead ...

SN 245. Caliber 7.63mm. Mauser made very few early Large Ring Transitional Carbines whose features largely reflected contemporary pistol production. T

SN 444. Caliber 7.63mm. Mauser made fewer than 200 stepped bbl C96s. Though most had a serial number under 200, a small number of parts were assembled

SN 50204. Caliber 9mm Export. Mauser only made a few Bolos around the 50000 serial range in caliber 9mm Export. This example has a 4" bbl and a...

SN 230. Caliber 7.63mm. Mauser made about 200 System Mauser guns, with a tapered bbl. This example has a 4.75" bbl, a fixed rear sight and a th...

SN 50160. Caliber 9mm Export. This extremely rare example has a 4" bbl, a reinforced bbl extension, a fixed rear sight, and a thin backstrap th...

SN 89775. Caliber 7.63mm. Caliber 7.63mm. Mauser made very few Bolos in the serial range usually used for Pre-war Commercials. This example has a 4&...

SN 7999. Caliber 7.63mm. Seldom seen Conehammer six shot with 4.75" bbl and fixed rear sight. Crown U proofed on the left side of the chamber f...

SN 7220. Caliber 7.63mm. Only a few six shot Conehammers had an adjustable sight. This one has a 5.5" bbl and slip-in 50-1000 rear sight. Stand...

SN 10473. Caliber 7.63mm. Conehammer with 4.75" bbl and fixed rear sight. Usual chamber address. Crown U marking on left side of bbl extension....

SN 7917. Caliber 7.63mm. Very scarce Conehammer reworked to have a later type bbl assembly, with a 4" bbl and 50-1000 rear sight. Standard cham...

SN 830. Caliber 7.63mm. Early standard production Conehammer 5.5" bbl and pinned 1-10 rear sight. Usual chamber address. Crown U marking on the...

SN 8387. Caliber 7.63mm. Mid-range production Conehammer with 5.5" bbl, Crown U marking on left bbl extension and antler proof on right side. F...

SN 13036. Caliber 7.63mm. Early Large Ring Transitional having many Conehammer features with 5.5" bbl and pinned 50-500 rear sight. Standard ch...

SN 40367. Caliber 7.63mm. Mauser made several Bolo variations in the 40000 serial range. This example has a 4" bbl and the desirable grooved 10...

SN 14702. Caliber 7.63mm Early Large Ring Transitional with many Conehammer features with 5.5" bbl and pinned 50-500 rear sight. Mauser address...

SN 27. Caliber 7.63mm. Very unusual fixed sight C96 with screwed in 4" bbl, reinforced chamber, and fixed rear sight. Mauser address on top of ...

SN 40695. Caliber 7.63mm. This very scarce long bbl Bolo was one of the first to have a small ring hammer. 5.5" bbl and slip-in 50-1000 rear si...

SN 29872. 7.63mm Caliber. Very unusual six shot reworked by Mauser in the 1930s with a 4" bbl and 50-1000 slip-in rear sight. Crown U proofed o...

SN 29568. Caliber 7.63mm. Very unusual Large Ring six shot with 4" bbl and fixed rear sight. Crown U marked on the left side of the chamber fla...

SN 33029. Caliber 7.63mm. Large Ring Shallow Milled C96 with 5.5" bbl and slip-in 50-1000 rear sight. Usual chamber marking with full serial nu...

SN 34978. Caliber 7.63mm. Full size C96 with small ring hammer, 5.5" bbl and slip-in 50-1000 rear sight. Usual chamber address with the serial ...

SN 38537. Caliber 7.63mm. Early Pre-war Commercial with 5.5" bbl and slip-in 50-1000 rear sight. Standard chamber address with serial number on...

SN 40892. Caliber 7.63mm. Scarce Small Ring six shot C96 with adjustable sight and slotted for stock has a 4" bbl and a slip-in 50-1000 rear si...

SN 70901. Caliber 7.63mm. Standard Pre-war Commercial with 5.5" bbl and 50-1000 rear sight. Usual chamber marking with full serial number on le...

SN 43165. Caliber 7.63mm. Mauser made relatively few six shots, particularly with an adjustable sight. 4" bbl with a 50-1000 slip-in rear sight...

SN 445877. Caliber 7.63 mm. Excellent Early Post-war Mauser Bolo with 4" bbl and slip-in 50-500 rear sight (that was only used on the earliest ...

SN 688086. Caliber 7.63mm. An exceptionally nice Mauser Banner Bolo with a 4" bbl and slip-in 50-1000 rear sight. Usual chamber address and Cro...

SN 20563. Caliber 7.63mm. Mauser made very few late Transitional Large Ring pistols while using up Conehammer components. This gun has a 5.5" b...

SN 23336. Caliber 7.63mm. Late Italian Navy Flatside with 5.5" bbl and slip-in 1-10 rear sight. Standard chamber address with full serial numbe...

SN 10018. Caliber 7.63mm. Late assembled Conehammer with Bolo-type bbl extension, 4" bbl and slip-in 100-1000 rear sight with grooved cursor. S...

SN 113962. Caliber 7.63mm. Standard Pre-War Commercial. with 5.5" bbl and slip-in 50-1000 rear sight. Crown U proofed on the left side of the c...

SN 406. Caliber 7.63mm. Taku Naval Dockyard was a high profile Chinese manufacturer of small arms during the Chinese Civil War that reached its height

SN 26421. Caliber 7.63mm. Late production Astra M900 with 5.5" bbl, slip-in 50-1000 rear sight, large ring hammer and full size broadly serrate...

SN 1433. Caliber 7.65 Luger. Early Swiss M1900 Luger with 4-3/4" bbl having a drift adjustable fire blued sight and a fixed rear sight. Swiss c...

SN 3892 a. M1906 Navy with 6" bbl having a drift adjustable front sight and two position 100-200 rear sight. No chamber markings. Usual Crown a...

SN 3003c. Caliber 9mm Parabellum. Scarce early Military Luger made by DWM with 1910 chamber marking. Standard 4" bbl with drift adjustable fron...

SN 3496v. 9mm Parabellum. This 1936 dated Artillery has an 8" bbl with a drift adjustable front sight and a height adjustable rear sight marked...