3218

C96 CONEHAMMER, TEN SHOT, WITH LATE BOLO BARREL ASSEMBLY AND MATCHING STOCK.

Currency:USD Category:Antiques / Firearms & Armory Start Price:1,500.00 USD Estimated At:3,000.00 - 4,500.00 USD
C96 CONEHAMMER, TEN SHOT, WITH LATE BOLO BARREL ASSEMBLY AND MATCHING STOCK.
SN 7335. Cal. 7.63mm. Scarce Conehammer reworked to have a later type bbl assembly with a 4" bbl and 50-1000 rear sight. Standard chamber address and full SN on the left chamber flat. Small Crown/Crown/U mark on the left side of the bbl extension. No proofing on the right side. Long extractor and independently dovetailed block retained firing pin. Full SN is externally marked on the firing pin retainer, on the back of the hammer and on the back of the frame above the stock slot. The sight assembly is a replacement #660. All matching serial numbers on disassembly except for the locking block which is unnumbered. Original and fully numbered grips. Lanyard ring. Complete with correct and factory matching conehammer shoulder stock. PROVENANCE: Dr. Geoffrey Sturgess Collection. CONDITION: 75-80% original blue with thinning on the sides of the frame, under the trigger guard, and the front and back straps that have mellowed to a brown patina. The extractor, rear sight assembly, bolt stop, firing pin retainer, and safety have their original and comparable condition fire blue. Grips with comparable condition varnish and oil staining. Dull bore with shallow rifling and oxidation from corrosive ammunition. Perfect mechanics. Stock is oiled and may have been lightly sanded. Single hairline crack in spine, near hinge, nearly invisible. Hinge has considerable surface toning. Untouched lug with sharp, matching numbering. A very scarce and difficult to find Conehammer, particularly with a factory matching stock. 4-52085 LMA83